• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.77-82
• /
• 2015

Slamming means that the hull hits the waves and receives impact pressure. This slamming effect may cause harm to people and when you put the hull at risk. so it is very harmful for cargo safety. Therefor slamming impact pressure should be fully considered in ship designing. In this study the model of wedged type structure are produced aimed to simulate a free fall that the experiments were carried out on different weight and free fall height. The flow field has been obtained by 2-frame grey level cross correlation PIV(Particle Image Velocimetry) method and experiment was divided into water entry and water exit. The impact pressure of free fall structure by a pressure acquisition system apply to dewetron system. The angles between a model and the water surface are adapted $15^{\circ}$ respectively. The weight change of models was given as 1.5, 1.8 and 2.0kg. To study slamming phenomenon for free fall height the experiments were carried out by the free fall height of 100, 200 and 300mm. The experimental value of the impact pressure according to the changes in weight was increase impact pressure in proportion to the increase in weight and higher free falling height has also influenced the increase in impact pressures.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.503-509
• /
• 2014

This paper describes the time-domain numerical method for prediction of slamming loads on a ship in waves using the strip theory. The slamming loads was calculated considering the relative vertical velocity between the instantaneous ship motion and wave elevation. For applying the slamming force on a ship section, the momentum slamming theory and the empirical formula-based bottom slamming force were used corresponding to the vertical location of wetted body surface. Using the developed method, the vertical bending moments, relative vertical velocities, and impact forces of S175 containership were compared in the time series for various section locations and wave conditions.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.3
• /
• pp.29-36
• /
• 2003

In rough seas, bow-flare regions of the fine ships (container ship and PCC) are subject to high impact pressures due to the bow-flare slamming. And many ships suffer structural damages in that region, even though they were built under the bow structure strengthening rules of the ship classes. So, a new design method for bow-flare structure is highly required. In this paper, a new prediction method of the bow-flare impact pressure (in terms of equivalent static pressure) acting on the fine ships' bow is presented. This method is based on the 11 fine ships' damage analysis and the mechanisms of water entry impact and breaking wave impact. Calculation results of the bow-flare impact pressure and the shell plate thickness are shown and discussed. Through the example calculations, it was found that the present method is useful for the structure design of the fine ships' bow.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2011

The main purpose of this paper is to estimate the impact of exchange rate and economic business activity on the passengers' demand for international transportation. The demand pattern depends upon the transport vehicles that the global passengers take. The global passengers' demand for transportation is modelled as exchange rate, industrial production and seasonal dummy variables. The seasonality is found in both water and air, but the former is far greater than the latter. All series span the period January 1990 to December 2008. The empirical results of this paper reveal that the income elasticity of sea transport is greater than that of air one, all of which are positive. The study also shows that the exchange rate has an significant impact on the demand for air transport, whereas it is insignificant in water transport. The impulse response function indicates that passengers increase steadily before peaking seven to eight months after the shocks to economic business activity and decline very slowly to its pre-shock level. The air passengers also respond negatively to the shocks in exchange rate and the impacts of exchange rate shock seem to decrease relatively slowly, while the water passengers respond positively after six months. The industrial production shocks remain above equilibrium for more than twenty four months, while the exchange rate shocks remain below equilibrium for more than twenty four months. Boosted by improved economic conditions worldwide, international tourism has recovered faster than expected from the impacts of the global financial crisis and economic recession of late 2008 and 2009. These facts suggest that the demand of global water transport has the high possibility of growing steadily and continuously.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.138-140
• /
• 2007

폰툰형 레저보트는 쌍동식 또는 삼동선식의 안전성이 확보된 선체와, 다양한 기능을 만족할 수 있는 상부구조로 구성, 건조비 뿐만 아니라 레저 접근성이 용이한 보트로서, 해양레저 선진국에서는 내수면뿐만 아니라 해수면에서도 함께 즐길 수 있는 가족형 레저보트로 인식되어 최근 보급이 확대되고 있는 추세이다. 그러나 폰툰형 레저보트는 최적의 공간활용을 위해 사각모양의 갑판형태로 인해 유체의 저항에 취약한 단점이 있다. 이로 인해 선저형상, 추진시스템 및 조향운전장치 뿐만아니라 선수선저부의 슬래밍 충격에 대비한 구조강도 등 체계적인 연구를 통한 개발이 필요하다. 이에 본 연구에서는 2가구 4인 가족단위로 함께 즐길 수 있는 안전성이 높고, 낚시, 스쿠버 둥을 위한 편의시설이 확보한 선형 최적형상 연구 및 구조강조 해석을 통한 9인승 규모의 폰툰형 레저보트를 개발하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.31-33
• /
• 2007

최근에 선박이 대형화, 고속화되면서 선수 충격파 영향으로 인하여 선체 또는 화물에 잦은 손상을 초래하기도 하고, 극단적인 상황에서는 선박이 절단되기도 한다. 본 논문에서는 내항성능 평가요소 중 하나인 상하가속도 값을 선교에 설치된 선체감시장치를 이용하여 해상상태별 변화량을 계측하고, 이를 모형시험 및 이론계산 결과와 상호 비교하였다. 또한 ITTC 에서 제시하는 내항성능 기준치와도 비교함으로써 실습선 한바다호의 내항성능을 확인하였다. 이러한 결과는 앞으로 경험할 수 있는 다양한 해상상태에서의 작업가능성 및 위험성 정도의 예측을 가능하게 함으로써 선박의 안전운항에 큰 도움이 될 것으로 판단되며, 또한 다양한 실선계측 자료를 통하여 조선소에서는 보다 우수한 성능의 선박 건조가 가능하리라 본다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.2
• /
• pp.53-59
• /
• 1986

On the slamming analysis of ship design the data for the impact pressure acted on the forward bottom of a ship are needed. Furthermore impact pressure is given by the function of both the hull form coefficient and relative velocity. In this papper. a simplified method to estimate hull form coefficient by perso;,al computer (p. c.) is studied. This numerical analysis was applied to the model of the Mariner type. and then the result by the p. c. was compared with that by IBM 7090 computer. Main results obtained are as follows: 1. The result by the developed p. c. method had fairly good agreement with that by conventional large computer (IBM 7090) within 2% error. 2. This developed method' by p. c. may be applied to the initial estimation of the K-value because of the close agreement between the ship lines by the results of p. c. and that of input.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.33-55
• /
• 1993

선수충격파의 문제를 푸는데 있어서 Boundary Integral Method(BIM)의 여러가지 수치 해석방법이 검토되었으며, 특히 여러가지 Time stepping scheme, Green function, far-field 조건등에 따른 수치해석안정성과 정확성의 상관관계가 연구되었다. von Neumann 안정성해석과 matrix 안정성해석 등을 이용한 선형 안정성해석을 기초로하여, 수치해석방법의 안정성 여부를 체계적으로 조사할 수 있는 parameter(Free Surface Stability number)를 설정하고, 이 parameter의 변화에 따른 비선형 운동해석을 연구하였다. 그 결과 비선형성이 심하지 않은 기진파의 경우에서는 비선형 운동해석의 수치해석 안정성의 선형 수치해석 안정성과 큰 차이가 없음을 알 수 있게 된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.3
• /
• pp.37-44
• /
• 2003

In rough seas, bow-flare regions of the sea-going ships are subject to high impact pressures due to the bow-flare slamming and panting. And many ships suffer structural damages in that region, even though they were built under the bow structure strengthening rules of the ship classes. So, a new design method for bow-flare structure is highly required. In this paper, bow-flare damage analysis is performed for 17 ships (total number of damage/non-damage data is 782). Based on this analysis, a new design standard and method for bow-flare structure (shell plate, frame and web frame) is proposed. 80.4% of the present damage/non-damage data were well-explained by this new design standard.