• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.905-918
• /
• 1996

초전도 마그네트 구조용 부재로 최근 개발된 오스테나이트계 스테인레스강 JN1 모재, GTA 용접부 및 열처리재에 대한 기계적 성질을 조사하기 위해 실온(293K)에서 극저온(4K)까지의 온도에서 소형펀치(Small Punch)시험을 실시하였다. GTA 용접부의 용융선 근방의 극저온 기계적 성질은 모재와 용접금속에 비해 크게 저하하였다. 4K에서 실험된 용융선 시험편으로 얻어진 하중-변위곡선상에서 부하의 초기 단계에 보통의 서레이션과 다른 pop-in이 관찰되었고, 이때 시험편 표면의 용융선 근처에서 약 0.1-1mm 정도의 크랙이 발생하였다. 열처리재의 기계적 성질은 열처리 시간과 온도의 증가 또는 시험온도의 저하에 따라 크게 저하되었다. 위의 결과에 기초하여 본 연구에서 실시한 소형 시험편을 사용하는 SP 시험법은 극저온에서 JN1 강의 모재와 열처리재뿐 만 아니라 GTA 용접부의 기계적 성질을 평가할 수 있는 유용한 시험법이었다.

• Journal of the Korean Society of Visualization
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2015

Sensitivity studies of blade angle and twisted angle are numerically investigated to optimize the Savonius blade. As blade angle increases, the contact area between blade and wind decreases, showing the suppression of the vortex generation near blade. Compared to the blade angle of 0 degree, the blade angle of 20 degree shows about 2.6% increment of power efficiency. Based on the blade angle of 20 degree, sensitivity studies of the twisted angle are performed. The result indicates that the adjustment of the twisted angle causes the torque of blade to increase. Optimized blade can suppress the formation of the vortex structure in rear region. Also, wind flows without disturbance of vortex when passing through the optimized blade. The 1kw vertical wind turbine system with optimized blade can generate 4442.2kWh per year and have 53% capacity factor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2002

In this paper, we have proposed the hardware architecture which implements the algorithm for retaining the connectivity which prevents the disconnection in the gray-scale image thinning. To extract the skeleton from the image in a real time, it is necessary to examine the connectivity of the skeleton in a real time. The proposed architecture finds the connectivity number in the 4-clock period. The architecture consists of three blocks, PS(Parallel to Serial) Converter and Stare Generator and Ridge Checker. The PS Converter changes the 3$\times$3 gray level image to four sets of image pixels. The State Generator examines the connectivity of the central pixel by searching the data from the PS Converter. The Ridge Checker determines whether the central pixel is on the skeleton or not. The proposed architecture finds the connectivity of the central pixel in a 3$\times$3 gray level image in the 4-clocks. The total circuits are verified by the design tools and operate correctly.

• The Korean Journal of Zoology
• /
• v.22 no.3
• /
• pp.103-114
• /
• 1979

The authors observed the ultrastructure of the granular glands in the amphibian skin with an electron microscope. The specimens from the experimental animals (Bombina orientalis, Bufo bufo gargarizans, Rana nigromaculata and Rana rugosa) were fixed in 2.5% glutaraldehyde-paraformaldehyde fixative in phosphate buffer at pH 7.2 prior to fixation in 1% osmium tetroxide, dehydrated in graded ethanol and acetone, embedded in Epon 812 mixture, and sectioned with a LKB-ultramicrotome. the ultrathin sections were contrasted with uranyl acetate and lead citrate and observed with a JEOL-100B electron microscope. The results were as follws: 1. The granular gland in the amphibian skin consisted of the glandular epithelial and the myoepithelial cells. 2. The epithelial cells of the granular gland in the amphibian skin consisted of the dark cells but the light cells were also observed in that of Bombina orientalis. 3. The granular glands of the amphibian skin were in holocrine fashion. 4. The nuclei of the epithelial cells of the amphibian cutaneous granular glands were round or oval and showed small and large inforldings of nuclear envelope. Heterochromatins were mainly distributed near the nuclear envelope. Mitochondria were mainly distributed in the perinuclear portion and rough-surfaced endoplasmic reticulums were developed in the cytoplasm but smooth-surfaced endoplasmic reticulums were not well developed. 5. Secretory granules were round or oval and electron-dense and less electron-dense granules were observed. 6. The authors infer that the differences in electron density of the secretory granules in the granular glands of the amphibian skin are due to difference in the concentrations of secretory substances as related to the processes of its formation, and that those chemical components are identical.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.105-114
• /
• 2016

When impact load is applied to a plate structure, a common phenomenon that occurs in structures is plastic deformation accompanied by a large strain and eventually it will experience a fracture accordingly. In this study, for the rational design against accidental limit state, the plastic material constants of steel plate which is formed by line heating and by cold bending procedure have been defined through the numerical simulation for the high speed tension test. The usefulness of the material constants included in Cowper-Symonds model and Johnson-Cook model with the assumption that strain rate can be neglected when strain rate is less than the intermediate speed is verified through comparing the present numerical results with those in references. This paper ends with describing the future study.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.747-754
• /
• 2002

Cold-formed steel truss system was reviewed in order to improve the various problems associated with the steel floor joist system, such as the structural deficiency caused by web punching and others. Two types of floor truss system using cold-formed steel were reviewed during this research project, including the square end type(SE type) and underslung type(EE type). The strctural behavior was analyzed using the AISI design criteria and various bending tests. Test results show that the SE type floor truss proved to be more efficient than the EE type when it is subjected to concentrated load, and that the unbraced length of the floor truss about the weak axis has much importance on the buckling strength of the floor truss. Test results indicate that their values surpass the calculated values predicated through the AISI design criteria.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.563-582
• /
• 2000

Two Cretaceous(80-90 Ma) non-marine sedimentary basins, Namyang and Tando Basins, are distributed in the Namyang area, Hwaseonggun and in the Tando area, Ansanshi, Kyungki Province, Korea. The Namyang and Tando Basins are composed of 10 facies, which are pooped into 5 facies associations(FA). FA I consists of massive conglomerate facies, normally graded conglomerate facies and reversely graded conglomerate facies, which is interpreted to have been formed by laminated sandstone facies, massive conglomerate facies(channelized), which is thought to have been formed by sheet flow, stream flow and suspension sedimentation in an alluvial/braided plain environment. FA III consists of massive mudstone(pebbly) facies, laminated mudstone facies, massive sandstone facies and is interbedded by channel-fill conglomerate. It is interpreted to have been deposited by suspension settling during flooding and channel-fill deposition in a floodplain environment. FA IV consists of massive conglomerate facies, normally graded conglomerate facies, massive sandstone facies, normally graded sandstone facies, and laminated sandstone facies and is interbedded with mudstone facies. It is thought to have been deposited by debris flow and turbidity current in a fan-delta environment. FA V consists of massive mudstone facies, laminated mudstone facies, laminated sandstone facies and is interbedded by massive conglomerate bed. It is thought to have been formed by suspension sedimentation and low-density turbidity current in a lake. In the Namyang Basin FA I is distributed in the eastern and southern margin of the basin, FA II in the middle part of the basin as north-south tending band. and FA III in the western part. In the Tando Basin FA II is distributed in the middle part of eastern margin and in the northwestern margin, FA IV in the southwestern part, and FA V in the central part. Correlation of the facies associations shows that FA I and II in the Namyang Basin are distributed in the lower to middle part of stratigraphic sequence and FA III in the upper part of the sequence whereas FA II and IV in the Tando Basin are in the lower to middle part and FA V in the upper part of the sequence. These patterns of facies associations distribution suggest that the Namyang Basin was developed as an alluvial fan and alluvial/braided plain at first and then evolved into a floodplain whereas the Tando Basin was developed as a fan-delta and alluvial/braided plain at first and then evolved into a lake environment.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.97-97
• /
• 2011

관로 및 맨홀에 퇴적된 유사는 우수관거의 통수능을 감소시키고 전체 우수관거 시스템의 효과를 저하시켜, 저지대 침수 및 맨홀역류의 원인이 되고 있다. 또한 관로의 최소 유속이 유지되지 않으면 오염물이 침전되고, 관로내의 유하시간이 길어져 침전물 부패로 인한 황하물질 및 악취 등이 발생될 수 있다. 따라서 관로의 유사와 관련된 주된 연구는 관로내의 유사거동 특성을 규명하는 것이었다. 그러나 맨홀에서의 유사퇴적 및 배출 등과 관련된 연구는 매우 미흡한 실정이다. 본 연구에서 유입관과 유출관이 일직선상으로 연결된 중간맨홀을 대상으로 수리실험을 실시하고, 맨홀형태(사각형, 원형), 유사유입형태(연속주입, 일정기간주입), 유사유입량 및 맨홀내부 구조변화에 따른 맨홀내 유사퇴적량을 확인하였다. 또한 맨홀내에 퇴적된 유사를 완전히 배출할 수 있는 관거 유속을 측정하였다. 유사퇴적량을 확인한 결과 맨홀내부의 구조변화가 없는 기본형에서는 유사유입형태가 연속주입 또는 일정기간주입인지와는 관계없이 유입유사량이 증가하면 퇴적량 또한 증가하였고, 맨홀형태가 사각형 또는 원형인지와도 관계없이 맨홀내부의 유사퇴적량은 비슷하였다. 기본형과 비교하여 맨홀내부에 벤칭을 설치하였을 경우 유사퇴적량을 50 % 이상 저감시킬 수 있었다. 이러한 결과는 사각형과 원형맨홀에서 동일하였으며 유사유입형태가 연속적으로 유입되는지 또는 일정기간동안만 순간적으로 유입되는지와도 관계없이 동일하였다. 그러나 벤칭이 설치된 사각형 맨홀의 경우 맨홀내부에 퇴적된 유사를 완전히 배출시킬 수 있는 유입관거유속이 기본형과 비교하여 30 % 증가하는 것으로 나타났다. 그러나 원형맨홀에서는 벤칭을 설치함으로써 유사 완전배출을 위한 관거유속 또한 저감시킬 수 있었다. 본 연구에서 제안한 개선안의 경우 사각형, 원형, 연속주입, 일정기간주입 등의 조건과 관계없이 퇴적량을 50 % 이상 저감시킬 수 있었고, 유사 완전배출을 위한 관거유속 또한 기본형과 벤칭이 설치된 맨홀과 비교하여 50 % 이상 저감시킬 수 있음을 실험적으로 확인하였다. 원형 맨홀의 경우 완전배출 관거유속은 벤칭설치 시와 같았지만 완전배출까지의 소요시간은 본 연구의 개선안이 현저히 짧았다. 따라서 본 연구를 통해 제시안 맨홀내부 구조변화 개선안이 흐름개선과 함께 맨홀내부에 퇴적되는 유사량을 저감시킬 수 있는데 효과가 있다고 판단된다.

• Korean Journal of Ichthyology
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

Structure on the feeding organs in two Korean ricefishes, Oryzias latipes and O. sinensis, was examined in the jaws and the teeth. In the jaw, O. latipes has a dent on the dorsal edge of distal arm of premaxilla (vs. straight in O. sinensis) and a alveolar arm of premaxilla running in straight line with distal arm of premaxilla (vs. ventra line in O. sinensis). O. latipes has also a dent on the posterior edge of dentary which is connected to coronoid process of dentary (vs. straight in O. sinensis). Large teeth developing only in the male, which is sexual dimorphism, developed into outside direction of the mandible in O. latipes (vs. dorsal direction in O. sinensis). In the teeth forms, O. latipes has two types (conical type and arrowhead type), whereas O. sinensis has only one type (conical type). Through this study, we confirmed that two Korean ricefishes show distinctive characteristics in the structure of the feeding organs.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.748-765
• /
• 2010

This study aims to investigate the difference of synoptic characteristics over East Asia according to the persistence of rainfall in Korea during the Changma season (June and July). In the cases of consecutive rainfall which lasts four or more days, there are developed ridges in 850hPa level east of the Korean peninsula which introduce stagnation of the synoptic cyclone over Korea. An cold area in 850hPa level moves southward from the Northern China in one day before the beginning the rainfall day in Korea and it aids the development of the stationary front in East Asia. When rainfall lasts a day or two, cyclones pass over Korea in rainy day and the stationary front in East Asia is not intensified. In both cases the synoptic cyclones near the Korean peninsula shows a deep-baroclinic structure, while in the former cases over the southwestern part of Japan a subtropical frontal zone which has a shallow structure appears near Japan. In latter cases the frontal structures are same near Korea and Japan. So, this means that the Changma is not necessarily similar to the Baiu of Japan in all cases.