• Title/Summary/Keyword: 선별 유닛

Search Result 5, Processing Time 0.026 seconds

Design of Transformation Engine for Mobile 3D Graphics (모바일 3차원 그래픽을 위한 기하변환 엔진 설계)

  • Kim, Dae-Kyoung;Lee, Jee-Myong;Lee, Chan-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.10
    • /
    • pp.49-54
    • /
    • 2007
  • As digital contents based on 3D graphics are increased, the requirement for low power 3D graphic hardware for mobile devices is increased. We design a transformation engine for mobile 3D graphic processor. We propose a simplified transformation engine for mobile 3D graphic processor. The area of the transformation engine is reduced by merging a mapping transformation unit into a projective transformation unit and by replacing a clipping unit with a selection unit. It consists of a viewing transformation unit a projective transformation unit a divide by w nit, and a selection unit. It can process 32 bit floating point format of the IEEE-754 standard or a reduced 24 bit floating point format. It has a pipelined architecture so that a vertex is processed every 4 cycles except for the initial latency. The RTL code is verified using an FPGA.

A Study on Selective Sampling using SOM (SOM을 적용한 선택적 샘플링에 관한 연구)

  • Kim, Man-Sun;Yang, Hyung-Jeong;Kim, Jeong-Sik;Kim, Sun-Hee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.11a
    • /
    • pp.38-41
    • /
    • 2007
  • 데이타 마이닝을 위하여 수집된 대용량의 데이타를 여과 없이 기계학습에 적용하는 것은 많은 시간과 비용이 요구될 뿐만 아니라 저장 공간면에서도 비효율적이다. 선별적 샘플링은 이러한 상황에서 매우 효율적으로 적용할 수 있도록 원본 데이타의 특성을 가능한 반영하여 새로운 훈련 데이타를 생성하는 방법이다. 본 연구에서는 신경망의 하나인 SOM을 적용한 선별적 샘플링을 수행하는데 있어서 여러 가지 선택 문제를 효과적으로 해결하기 위한 실험을 수행한다. 실험 결과로는 두 가지 결과를 얻었다. 1) 충분한 맵 사이즈를 선택해야 학습 데이타의 함축적인 특성을 잘 반영한다, 2) 선택적 샘플링을 위한 유닛선택 방법에서는 의미없는 유닛을 제거함으로서 분류 성능향상을 얻을 수 있다.

Development of Automatic Idle Stop Control System with Signals of ECU and TCU (ECU 및 TCU 신호를 이용한 자동차의 공회전 자동정지 제어 시스템 개발)

  • Kim Seong-soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.7
    • /
    • pp.1601-1606
    • /
    • 2005
  • In this study, an automatic idle stop control system was developed, which automatically stops the idle state engine as it detects the stop state of the car for several seconds and restarts the stopped engine with the driver's electrical signal. It is composed of microprocessor and the related electronic circuits and communicates with ECU and TCU. With accurate and confirmed operating performance, the control system was equipped in the test car which was proceeded the ECE15+EUDC mode test. It is confirmed that the control system, ASG has much favourable effects on reducing the fuel consumption and harmful exhaust emissions.

Design 5Q MPI Hardware Unit Supporting Standard Mode (표준 모드를 지원하는 5Q MPI 하드웨어 유닛 설계)

  • Park, Jae-Won;Chung, Won-Young;Lee, Seung-Woo;Lee, Yong-Surk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.1B
    • /
    • pp.59-66
    • /
    • 2012
  • The use of MPSoC has been increasing because of a rise of use of mobile devices and complex applications. For improving the performance of MPSoC, number of processor has been increasing. Standard MPI is used for efficiently sending data in distributed memory architecture that has advantage in multi processor. Standard In this paper, we propose a scalable distributed memory system with a low cost hardware message passing interface(MPI). The proposed architecture improves transfer rate with buffered send for small size packet. Three queues, Ready Queue, Request Queue, and Reservation Queue, work as previous architecture, and two queues, Small Ready Queue and Small Request Queue, are added to send small size packet. When the critical point is set 8 bytes, the proposed architecture takes more than 2 times the performance improvement in the data that below the critical point.

Fabrication and Optimization of a Fiber-optic Dosimeter for Proton Beam Therapy Dosimetry (의료용 양성자선 계측을 위한 광섬유 방사선량계의 제작 및 최적화)

  • Jang, Kyoung-Won;Cho, Dong-Hyun;Yoo, Wook-Jae;Seo, Jeong-Ki;Lee, Bong-Soo;Hwang, Eui-Jung;Shin, Dong-Ho;Park, Sung-Yong
    • Progress in Medical Physics
    • /
    • v.21 no.1
    • /
    • pp.29-34
    • /
    • 2010
  • In this study, we have fabricated a fiber-optic dosimeter for a proton beam therapy dosimetry. We have measured scintillating lights with the various kinds of organic scintillators and selected the BCF-12 as a sensor-tip material due to its highest light output and peak/plateau ratio. To determine the optimum diameter of BCF-12, we have measured scintillating lights according to the energy losses of proton beams in a water phantom. Also, we determined the adequate length of organic scintillator by measuring scintillating lights according to the incident angles of proton beam. Using an optimized fiber-optic dosimeter, we have measured scintillating lights according to the dose rates and monitor units of proton accelerator.