• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.576-582
• /
• 2016

To cope with international regulations, such as Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and so forth, and to enforce limitations on $CO_2$ emissions, green-ship technology to lower fuel consumption has been actively researched, and the development of an energy-saving device (ESD) is being pursued. In order to design an ESD for small and medium-sized domestic vessels, an analysis on flow characteristics has been performed in the present study. Through a model test and numerical analyses, the characteristics of flow around the stern bilge and bulb have been compared to improve wake quality and resistance performance. As a result of these comparisons and analyses, a vertical plate has been adopted,, as a new ESD. Design criteria for the proposed ESD are also suggested. By applying this new ESD, it is expected that the total resistance and average nominal wake can be reduced by 3.04 % and 18.8 %, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.3
• /
• pp.160-167
• /
• 2020

A two-stroke diesel engine and a propeller normally adopted in large merchant ships are regarded as major ship vibration sources. They are directly connected and generate various excitation components proportional to the rotating speed of diesel engine. Among the components, the magnitude of two excitation components with the same frequency generated by both engine and propeller can be compensated by the adjustment of their phase difference. It can be done by the optimization of propeller assembly angle but requires a number of burdensome trials to find the optimal angle. In this paper, the efficient estimation method to determine optimal propeller assembly angle is proposed. Its application requires the axial vibration measurement in sea trial and the numerical vibration analysis for propulsion shafting which can be substituted by additional vibration measurement after one-trial modification of propeller assembly angle. In order to verify the validity of the proposed method, the phase difference between two fifth order excitation components generated by both diesel engine and propeller of a real ship is calculated by the finite element analysis and its result is indirectly validated by the comparison of axial vibration responses at intermediate shaft obtained by the numerical analysis and the measurement in sea trial. Finally, it is numerically confirmed that axial vibration response at intermediate shaft at a resonant speed can be decreased more than 87 % if the optimal propeller assembly angle determined by the proposed method is applied.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.35-40
• /
• 2005

Maneuverability of ships has been receiving a great deal of attention both concerning navigation safety and the prediction of ship maneuvering characteristics, to improve it. high-lift device could be applied to design of rudder at design stage. Now, we carried out the flow visualization and investigation of flow field around a flap rudder(trailing-edge flap). Flow visualization results of flap defection shown as the flow around a NACA0020 Flap Rudder will be conducted in a Circulating Water Channel. The purpose of this investigation will be to investigate the development of the separation region on the flap rudder with the variation of the angle of attack and determine the angle of attack at which the flow separates and reattaches.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.114-115
• /
• 2023

Research on eco-friendly ships is being actively conducted due to the strengthening of environmental regulations in the shipping sector by the International Maritime Organization (IMO). However, most studies are on large ships, and research on small ships is insufficient. Since most fishermen operate small boats, research on eco-friendly fuel vessels is necessary. This study performed resistance performance analysis, model tests, and POW tests to develop a hybrid electric propulsion ship, and compared and verified the CFD and model test results.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.509-513
• /
• 2005

Ship maneuverability is mainly determined according to hull-propeller-rudder system of a ship and directly related to the ship safety during the operation in the ocean. Among hull-propeller-rudder system the rudder system had direct concern with the ship maneuverability and a special rudder has been recommended to improve the ship maneuverability. In this paper the study of flapped rudder's 2-dimensional section was accomplished Model tests had been carried out with different angles of attack of a main foil and flap's deflection angles to predict the performance of the flapped rudder and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flow field during model tests. $Re=1.027{\times}10^4$ had been used during the whole experiments and measured results had been compared with each other.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.19-26
• /
• 1995

The assessment of maneuverability of a ship is very important from the view point of safety of human beings and of pollution of ocean. And, it is quite natural that every ship yard wants to have some tools with which they can build a ship with good maneuverability. But, maneuvarability of a ship is very subtle problem, and to calculate the exact maneuvering motion, lots of captive model tests must be carried out. Futhermore, in the initial design stage we can not make the scale model, because the lines of a ship is not fixed. In this paper, some approximate method to calculate the maneuvering motion of a ship, with the principal dimensions of hull, and propeller, rudder characteristics only, is studied. And, proposed approximate method is used to calculate the turning and zig-zag maneuver of several ships. The results of those calculations and the usability of the method are discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.914-921
• /
• 2022

The International Maritime Organization (IMO) has set a goal of reducing ship's carbon dioxide emissions by 70% and greenhouse gas emissions by 50% by 2050 compared to 2008. Shipowners and shipyards are promoting various R&D activities such as LNG propulsion, ammonia propulsion, electric propulsion, CO₂ capture, and shaft generators as a way to satisfy this problem. The dual shaft generator has the advantage that it can be directly applied to an existing ship through remodeling. In this paper, the total fuel reduction rate that can be obtained by applying the shaft generator to the existing ship was verified through simulation. For this purpose, the size of the medium-sized ship was defined, and the governor, diesel engine, propeller, torque switch, generator for shaft generator, propulsion motor for shaft generator, and ship model were modeled and simulated.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.71-78
• /
• 2001

In ship building industry, CNC and CAM are mostly applied to NC cutting and manufacturing of propeller and prototype ship model. Herein, prototype ship model is producted by CAD/CAM process. Hull form data is obtained from the ship drawing and used for 3D modeling by CAD software Pro/Engineer. CAD data is transferred into CAM s/w SPEEDplus to perform CNC process and the prototype small ship model is manufactured by CNC machine. To solve data transfer among different systems. IGES and STEP neutral formats are currently used. Herein IGES format is adopted for data transfer between CAD/CAM softwares.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.81-87
• /
• 2010

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.155-160
• /
• 1993

A design method for web frame scantling on engine room structures was described. The parameters determining the scantling of web frame were studied on the basis of the empirical ship's data. It is found that the parameters determining the scanting of web frame consist of tween deck height, main engine and propeller excitation frequency, scantling draft, web frame spacing, the number of decks and main engine BHP etc. And a formula proposed by empirical ship's data was established in view points of static and dynamic structural behavior. In this study, it can be shown that at initial design stage, a method for web frame scantling of engine room structure is provided as very practical design processes.