• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.187-188
• /
• 2018

2004년 체결된 평형수관리협약은 2016년 9월 비준되어 2017년 발효 예정이었다. 그러나 발효 직전, 물리적으로 모든 선박에 평형수 처리장치를 설치하기 어렵다는 의견에 따라 2년 유예되었다. 따라서 수만 척의 선박은 2024년까지 평형수 처리장치를 설치해야 하며, 해당 시장의 규모는 약 40조원까지 성장할 것으로 추정된다. 그러나 우리나라에서 개발한 현재 평형수 처리장치는 IMO 형식승인을 받은 제품만 있을 뿐 USCG 형식승인을 받은 제품이 없어 평형수 처리시장을 선점하기에 어려움이 있다. 따라서 본 연구에서는 USCG 성능기준을 만족하는 평형수 처리기술 개발을 위하여 IMO와 USCG 성능기준의 차이를 비교하고, 현재 사용되고 있는 선박평형수 처리장치의 국내 및 세계 기술 수준을 비교 분석하여 자외선 발광 다이오드 및 이산화티타늄을 이용한 평형수 처리장치 개발방향을 제시한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.90-92
• /
• 2015

국제해사기구는 선박평형수를 통한 수중생물의 이동을 막기 위해, 2004년 선박평형수와 침전물 통제 및 관리를 위한 국제협약을 채택하였으며 2015년 5월12일 현재 73개의 처리장치가 최종승인을 받았거나 진행중이다. 선박평형수 처리기술은 전기분해, 오존식, 자외선식 등 여러 기술이 개발되었으나 비용 및 효율면에서 전기분해방식이 타 방식에 비하여 좋고 간접식과 직접식으로 나누어지며 직접식이 간접식에 비해 우수하다. 본 논문에서는 직접식 전기분해 장치를 이용한 선박평형수 처리시스템 개발에 관해 연구하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.70-70
• /
• 2011

본 논문에서는 에너지 절감형 선박평형수 처리장치를 개발하기 위하여 $TiO_2$ 광촉매와 자외선 램프를 적용한 선박평형수 처리장치에 대하여 기술하였다. 제작된 처리장치의 정격 출력과 처리용량은 각각 2.16 kW 및 $100m^3/h$이다. 처리장치의 살균효율은 플랑크톤을 사용하여 IMO 규정에 따라 평가하였다. 실험결과로부터 시제작 선박평형수 처리장치의 살균효율은 동물성 플랑크톤에서 99.7 %, 식물성 플랑크톤에서 98.84 %로 나타났다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2016

Ballast water in ship operation is essential for a safe voyage. However ballast water can contain unwanted organisms that are the cause of disturbing the ecosystem by the transfer of potential invasive species. To prevent the destruction of the environment, the International Convention for the Control and Management of Ship's Ballast Water and Sediments(BWM Convention) was adopted in 2004. BWMS (Ballast Water Management System) has been developed to prevent the transportation of organisms to another region in order to fulfill the requirements IMO (International Maritime Organization) regulations. Nowadays there are about 50 approved Ballast Water Management Systems of various types globally. The most common BWMS types are UV (Ultra Violet), Electrolysis and Ozone. Among these types there are many difficulties in determining the optimum type of BWMS which can be suitable for the user and designer's requirements. The main objective of this research is to select the best BWMS type by using AHP. To apply AHP, the most important criteria for the BWMS development are derived by users and designers. From our results, we can give a guide BWMS type to the developers of BWMS.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.219-226
• /
• 2012

The International Maritime Organization (IMO) adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004 to prevent the transfer of aquatic organisms via ballast water. Thirty-four ballast water treatment systems were granted IMO active substance basic approval, among which twenty systems were granted final approval. This paper is an in-depth consideration of the mechanism principles of the treatment systems that received active substance basic or final approval from IMO, and on the concentration of Total Residual Oxidant (TRO). The TRO maximum allowable discharge concentration was reduced by neutralization equipment, resulting with a concentration lower than 0.2 ppm. However, between various treatment systems TRO maximum allowable dosage showed large differences, ranging from 1 to 15 ppm. The discrepancies of treatment allowable dosage concentration between different treatment systems are largely due to the properties of species and water conditions such as the temperature and turbidity, rather than the characteristics of treatment systems and the type or presence of filters etc.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.214-220
• /
• 2008

The Ballast Water Management Convention provides that ballast water treatment systems which make use of active substances shall be approved from IMO according to the procedure developed by the IMO. The Convention described that active substance means a substance or organism, including a virus or a fungus, that has a general or specific action on or against harmful aquatic organisms and pathogens. The Marine Environment Protection Committee of IMO gave basic approval to 13 ballast water management systems and final approval to 4 systems until October 2008. This paper considered the matter of procedure and documents of the basic and final approval based on the "Procedure for approval of ballast water management systems that make use of Active Substances (G9)" and "The Methodology for information gathering and the conduct of work of the GESAMP-BWWG" and summarized the specifications of the treatment systems which was granted the basic or final approval from IMO and raised several points.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.412-417
• /
• 2015

The purpose of this study is to treat the ballast water by shear stress without an environmental pollution and to find out the optimal treatment conditions. The ballast water problem is issued up as the trade activated and the cargos mobilized. To improve this problem, International Marine Organization(IMO) make the rule about the ballast water treatment with specific restrictions. Although many countries have been studying about the ballast water treatment technology, there is almost no technology that can treat the microorganisms under $50{\mu}m$ without any secondary pollution. In this study, we tried to treat ballast water by applying shear stress as the physical treatment for the sterilization and tried to find out the optimal conditions including the 100% sterilizing rate and the best economic condition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.19-27
• /
• 2015

As the recent regulation of Internaional Maritime Organization (IMO) is enforced, the advanced technology of Ballast water treatment system (BWTS) is needed to meet its requirements. Until now, there are two kinds of the BWTS technologies such as physical methods (Membrane and UV) and chemical methods (Chlorin and Ozone). However, these conventional methods have some limitations of auxiliary power, low productivity, residual treatment and etc. In order to overcome these problems, this paper introduces the new kind of BWTS based on mechanical principle and investigates the effect of rotating disc shapes on flow characteristics between rotating and stationary discs by computational fluid dynamics (CFD). Planar and Step types can make the local cavitation generated along radius, and Circular type can increase the intensity of shear stress.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.136-137
• /
• 2011

선박평형수내 미생물 처리를 위해 다양한 방법들이 사용되고 있으며, 본 논문에서는 랩테스트를 위한 전기분해장치로서 전기분해 방식에 사용되는 정류기 개발 및 그 장치에 관한 것이다. 선박평형수를 처리하기 위해 설계된 시스템은 랩테스트용 도로 적용이 가능하다.