• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.213-218
• /
• 2011

This study simulates and compares the evacuation time and characteristics according to the living patterns on board a training ship which was launched in Dec. 2005, on the viewpoint of the various activities being possible on board a cruise ship. Based on interviews with personnels on board, 3 living patterns are set as representative living conditions; Pattern A(all personnels are positioned at their cabins), Pattern B(all personnels are positioned at lecture rooms, offices or else), Pattern C(all personnels are positioned at restaurant or cafeteria). The simulation results show that Pattern B is comparatively ideal because the evacuation time is short and there is less delay of personnels' movement on each deck. On the contrary, Pattern C is evaluated as the worst because the average evacuation time took more than 360 seconds and the bottle-neck happened at Upper deck. As a result, this study proposes the needs of various countermeasures against the fire and/or disaster, considering the various living patterns on cruiser(s) and/or passenger ship(s).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.127-132
• /
• 1975

This is an experimental study that aimed to find out a possible relationships between the noise of the ship and the intelligent quotient, and the creativity of the crew member during June 5, to August 24, 1975. The experiment was carried out on the university training ship, the Oh-Bae-San Ho(1,126 tons), and the Kwan-Ak-San Ho (243 tons) and the training ship Baek-Kyung Ho (380 tons) of Je-ju College, where the total number of 144 students engaged on their tasks of practical exercise. And the following results were obtained : The decreases of I.Q. was evident as compared to the score obtained at the class room; soon after the embarking of the ship, the students on the deck decreased the score by $7\%$ of what they obtained at the class room while the students in the engine room decreased by $13\%$. The I.Q. was regaining the normal state after three days of embarking seemingly showing the fact that the students became adapted to the noise of the ship, but no remarkable improvement was visible during the period of 3 days to 35 days on the ship. One of the remarkable fact that had not been expected was that the problems for audio discernment was much easily solved in the midst of noise that made oral communication impossible (102 dB) than in the place of noise where conversation was possible(67 dB).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1267-1279
• /
• 2014

In this paper, we suggest the development of object detection systems for the safety of the ship through the study of the properties of short-range radar. Many of the short-range radars developed for special purpose like cars has cheaper price advantages but it is not proper to every application. In order to overcome such obstacles we need to analysis data from experiments in various environments and feature analysis of the device is essential. Also, the data clustering algorithms to display correct classified moving objects is necessary. In this paper we propose the advanced fast moving object detection system using short range radars with better detection accuracy. And we proposed a clustering algorithm using the value of the RCS and the speed and trajectory information of the radar data that are reflected.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2223-2231
• /
• 2010

Recently, an important physical device of transportation, such as car, railroad, ship and aircraft has changed into electronic control unit. According to accident reports, the most of car accidents are caused by faults of embedded software loaded to computer control unit. The facts implies that the test to find defects in embedded software haven't performed sufficiently. As a result, it is necessary to establish the test procedures of embedded software based on safety assessment criteria. The objective of this proposal is to provide a unit test procedure complied with the safety assessment criteria for the embedded software. In addition, an effective unit testing procedure and defect analysis methods are proposed and a testing procedure using a safety criteria built-in tool is presented.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.377-383
• /
• 2007

The number of calling ports has been decreased and the degree of inter- and intra-port competition has been increased, which is caused by the market trends that shipping liners have and operate their own terminals, strategic M & A frequency occurs among shipping liners, and container vessel size is increasing. The trends also cause shipping liners to change the evaluation factors for decision to call a particular port such as port preference, potential for growth, port competitiveness, etc. Since the decision of liners greatly influences the policies for port and terminal development, it is worth having interest in the evaluation factors. Therefore, this work intended to evaluate 8 major ports (Port of Singapore, Hong Kong, Shanghai, Busan, Rotterdam, Kaoshing, and Tokyo) with regard to liners' evaluation factors (calling port preference, potential for growth and port competitiveness) and to classify ports by similarity of evaluation factors with the methodologies of ANOVA analysis and Duncan test. The result shows implication for liners' viewpoint to evaluate major ports in the world.

• Korean Journal of Environmental Biology
• /
• v.38 no.3
• /
• pp.461-475
• /
• 2020

This study was conducted in the southwestern area of Korea using a neuston net in September (14 stations) 2017 to understand the environmental factors affecting neustonic zooplankton. Temperature, salinity, chlorophyll a concentration, suspended solids, and microplastics were included as environmental factors. Based on the density of the copepods, the study area was divided into three regions: the Seomjin River water influence area, the frontal mixing area, and the warm water affected area (Jeju warm current and Tsushima warm current). In the latter two areas, the major species were Pontella chierchiae, Canthocalanus pauper, and Oncaea spp. Also, neustonic zooplankton showed a significant relationship between the density of phytoplankton and microplastics in the frontal mixing area, and temperature and suspended solids in the warm water affected area, respectively (p<0.05). This indicates that microplastics can affect the offshore zooplankton community.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.191-198
• /
• 2007

Marine accidents are increasing as time goes on, in spite of lots of efforts are given. Marine accidents can be classified 3 categories those are ship's condition, navigator's condition and weather condition. In this paper, statistical analysis were carried using marine accidents data from 1997 to 2006. In order to analyze accident rate by time zone, ship's speed and finding distant, SPSS variance analysis was carried out. Results are followed. There was significant difference between time zone 20${\sim}$04 hours and other time zones. The accident rate in daytime was bigger than that at night. In case of the speed at collision, the speed of 5${\sim}$10 knot has significant difference to other speed cases. In finding distant cases, the case of less than 1 mile has significant difference to other distant cases.

• Information and Communications Magazine
• /
• v.29 no.11
• /
• pp.68-74
• /
• 2012

국내 차세대 이동통신 산업은 1994년 세계 최초 CDMA 상용화에 이은 CDMA2000 및 W-CDMA 구축, 세계 최초 최고의 무선 인터넷 기술인 WiBro기술의 개발 및 보급, 꿈의 통신으로 여겨지는 3.9세대 LTE시스템 구축과 보급으로 세계 최고의 뛰어나 기술력을 가진 산업으로 발전하였다. 이러한 우수한 국내 이동 통신 인프라는 기존의 조선 및 선박과 같은 전통산업과 바이오 및 의료기기와 같은 신산업과의 융합을 통하여 국가 경쟁력 한층 더 향상 시키는데 기여하였다. 또한 휴대폰분야에서도 국내 기업이 세계 최고의 경쟁력을 가진 기업으로 성장하는 등, 차세대이동통신 산업은 타 산업과 달리 기술의 빠른 추종자 (Fast Follower)에서 기술 선도자 (First Mover)로서의 지위를 가지게 되었다. 그러나, 이동통신 시스템 분야에서는 이미 중국 업체가 세계적으로 약진하고 있으며, 휴대폰 분야에서는 선도 기업과의 경쟁 및 견제, 후발 주자인 중국 및 대만 기업의 추격에 직면하고 있다. 한편 국내 휴대폰관련 중소 중견기업은 급격한 단말 환경변화에 따라 많은 어려움에 처해 있다. 따라서 본 논문에서는 차세대 이동통신 기술 선도자로서 지속적인 경쟁력 확보 및 대-중소기업 동반성장 생태계 조성을 통한 모바일 최강국 달성을 위한 이동통신 분야 국가 연구 개발 전략을 제시하고자 한다. 먼저 제I장에서는 차세대이동통신의 개념 및 분류 기준에 대하여 알아보고, 제II장에서는 차세대이동통신에 대한 국내외 현황과 국내 기술 수준 및 기술 경쟁력을 고찰한다. 제III장에서는 기술 선도자로서의 차세대이동통신 분야의 비젼을 제시하고, 이러한 비젼을 실현시키기 위한 국가연구개발 추진 전략을 제시한다. 마지막으로 제IV장에서는 우리나라 이동통신 미래상과 함께 국가연구개발 전략에 대한 결론을 맺는다.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.361-370
• /
• 2015

Wind energy began to receive attention as a new alternative fuel since 20 years ago and is growing as a booming global business model. Global wind power generation in the world has been continuously increasing for the past 10 years, accounting for over 30% of cumulative rate compared to total power generation. Global demand for wind power generation is gradually expanding due to restriction on carbon emission and environmental problems caused by increased greenhouse effect. Accordingly in this study, current transportation routes are classified into three types including access-priority route, economics-priority route, and convenience- priority route depending on distribution characteristics of wind power equipment in order to suggest transportation methods other than ships. The three types of transportation route that this study declared can make the Wind power equipment manufacturing companies can judge not only the duration of transportation but also effectiveness and economic feasibility. It means that the manufacturers can analyze and compare the effectiveness and economic feasibility, which are proceed by the shipping company and freight forwarder until now days.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.8-8
• /
• 2009

알루미늄 합금 Al 6082-T6는 최근에 개발되어 북유럽 등의 선진국에서는 그 뛰어난 해양 내식성과 우수한 강도로 인하여 해양구조물의 헬리데크(Helideck), 타워 갱웨이(Tower gangway), 알루미늄 피팅류(Aluminium fitting)등의 해양구조물과 플랫폼(Flatform), 알루미늄 래더(Aluminium ladder)등의 선박부품, 차량, 기계부품 분야에서 전 세계적으로 널리 사용되기 시작하였다. 그러나 전통적으로 용접금속의 기공은 결함으로 분류 되고, Rakesh Kumar 등의 논문에 따르면 용접 시 용접금속 내에 발생되어진 미세기공이 기계적 성질에 악영향을 미치는 것으로 보고되어졌다. 따라서 용접금속내의 발생하는 기공을 방지하는 용접공정의 개발이 반드시 필요하다. 본 연구의 목적은 Al 6082-T6 고속 MIG용접에서 기공방지를 위한 용접공정을 개발하는 것이다. Al 6082-T6의 7t 플레이트에 Al 5356의 와이어를 사용하여 아크길이 변경 및 용접속도를 60cpm과 120cpm으로 변경하여 실험하였고, 용접속도 120cpm의 고속 MIG용접에서 토치 진행각을 변경하여 실험을 진행하였다. 용접공정 파라메터 변경에 따른 기공율 측정은 이미지 분석 소프트웨어를 사용하여 정량적으로 분석하였다.