• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.100-102
• /
• 2015

In recent years, using a smart phone that can access the Internet becomes routine in society through development of information and communication technology. On land, as especially actual accidents and research results show risk that using the smart phone while driving at the same time, and there are traffic laws and regulations that restriction of using of smart phone. But the regulations on the use of smart phones at sea is incomplete state. On this paper. We invested present status of use and reality of smart phone at sea and analyzed the subjective risk for judging to apply to regulation. And we analyzed risk quantitatively by using the simulation experiment; it Suggested a direction of guideline for use of smart phone at sea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.187-190
• /
• 2010

Lately, IT has been rapidly in land. as a result, mobile device come into wide use and is very important in everyday life. But in ship are limits network with communication Equipment and service. as a result, be far removed from information age. Currently, ship Is connected with the outside world via satellite on the voyage. but, because high billing, ship is possible data transfer using low speed bandwidth. because ship is not possible using LAN, only limit ship's crew some use internet in limited space. so, ship is required construction of the network. in this paper, because composition of basic IT environment with information need of crew and customer from ship to cruises, there construct LAN in ship and propose network design for network of ship.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.79-84
• /
• 2019

The use of emergency escape breathing devices (EEBD) is strongly required to protect against toxic gas or flooding caused by ship fires or accidents. Recently developed domestic EEBD products only satisfy the basic performance requirements, but no wear fit and activity performance evaluation has been done for real usage. In this study, the global level test requirements for wear comfort and activity of EEBDs were developed and the open and closed type of domestic EEBD products were evaluated. Poor visibility, longer wear time, breathing resistance, and hose obstruction in an open type and canister obstruction, weight unbalance, and an invisible black breathing bag in the closed type EEBD were estimated to be the main problems that need to be improved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

Many researches have been carried out consistently for the green ship owing to its economic increasement, efficiency and convenience. One of them is an electronic controlled marine diesel engine. However, we are suffered from dissemination of above engine, due to its anxiety about safety and reliability. In order to solve these problems in this study, emission characteristics test of main propulsive two-stroke diesel engine, equipped both electronic control and cam drive fuel injection systems, has been performed and evaluated under the various load conditions. From the test results, we have confirmed that exhaust gas emission characteristics of the electronic control system is similar to the cam drive system in eco-mode operation, but NOx in emission mode has been decreased 100ppm or more in full load condition. HC emission from the electronic control system is decreased 10~20ppm at 50% load, and 35~40ppm at 25% load in comparison to cam drive system. In fuel consumption, it is considered that 7g/kWh is decreased than the value of cam drive system at 700bar of injection pressure, which is 200bar higher than cam drive system.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.37
• /
• pp.24-34
• /
• 2014

최근 몇 년간 국내 해양레저에 대한 관심 증가에 따라, 정부와 지자체의 해양레저산업에 대한 연구 지원 및 마리나 구축 사업 수행 등 해양레저 수요를 수용할 수 있도록 장비 및 시설 확보를 위하여 다양한 방면으로 노력이 한창이다. 그러나 아직까지 국내의 해양레저를 위한 시설 구축은 진행단계이다. 전국적으로 마리나 구축을 위한 작업이 한창이며, 이미 구축된 마리나에서 요트를 계류할 경우 관리하는데 드는 비용이 만만치 않아 사용자에겐 부담이 크다. 세일링 요트의 경우 span이 큰 모노킬이 부착되어있으므로 마리나 혹은 육상계류시설을 이용하지 않을시 모노킬이 파손될 위험이 있다. 본 연구에서는 서해안의 해양레저 대중화를 위해 누구나 안전하게 세일링을 즐길 수 있고, 두 개의 킬로 선체를 지지하여 육상 및 갯벌에서도 선체가 기울지 않고 설 수 있는 트윈킬 요트를 개발하여 보급하고자 한다. 기존 세일링 요트중 성능이 좋은 편인 야마하에서 제작한 블루워터21의 선형을 활용하였고 트윈킬은 블루워터21 모노킬의 면적 및 무게중심 등을 분석하여 개발하였다. 트윈킬 요트의 경우 모노킬 요트보다는 저항성능이 불리할 것으로 예상되므로 모형시험을 수행하였으며, 그 결과 모노킬과 트윈킬의 저항성능에 대한 차이가 예상보다 크지 않음을 확인하였다.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.167-174
• /
• 2009

Recently, design technology of has been required such as catamaran yacht with high-speed according to expand a marine leisure industry. The domestic technical development for design and production of yacht is not actively than Canada, USA, Japan etc. However, with further development of yacht design & technology, it is need to develop a key technology related to increase the value of catamaran yacht. In the present paper, new guideline is suggest for catamaran yacht as like kinds of marine leisure ship in order for fundamental structure design and structural analysis for twin-hulled ship yacht and techniques for structural analysis as sea leisure ship in this research. The class of society has not been proposed formally about regulation and methodology for estimation of strength of small hight-speed craft with satisfying two conditions as noted; length less than 50meters, ratio of length to breadth less than 12. In the present study, we were adopted DNV (Yachts, Design Principles, Design Loads, Hull Structural Design) Rule and KR (FRP rule application guide) for scantling of structural members. Furthermore, ABS rule is used for structural calculation about application of loading conditions for catamaran yacht. This study can be available feedback role to manufacture of 38ft diffusion style for catamaran yacht. It is expected that this study will be a good reference in order to design of catamaran yacht with high-speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.706-714
• /
• 2020

Currently, 90 % of the world's population breathes air with a fine dust content exceeding the World Health Organization's annual average exposure limit (10 ㎍/㎥). Global efforts have been devoted toward reducing secondary pollutants and ultra-fine dust through regulations on nitrogen oxides released over land and sea. Domestic efforts have also aimed at creating clean marine environments by reducing sulfur emissions, which are the primary cause of dust accumulation in ships, through developing and distributing environment-friendly ships. Among the technologies for reducing harmful emissions from diesel engines, electrostatic precipitator offer several advantages such as a low pressure loss, high dust collection efficiency, and NOx removal and maintenance. This study aims to increase the durability of a ship by improving equipment quality through failure mode effects analysis for the preventive maintenance of an electrostatic precipitator that was developed for reducing fine dust particles emitted from the 2,427 kW marine diesel engines in ships with a gross tonnage of 999 tons. With regard to risk priority, failure mode 241 (poor dust capture efficiency) was the highest, with an RPN of 180. It was necessary to determine the high-risk failure mode in the collecting electrode and manage it intensively. This was caused by clearance defects, owing to vibrations and consequent pin loosening. Given that pin loosening is mainly caused by vibrations generated in the hull or equipment, it is necessary to manage the position of pin loosening.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.225-226
• /
• 2012

Recently, In the domestic is used mainly fiberglass reinforced plastic(GRP) and is built for maritime leisure vessel & structures. but it less attention is insufficient for ship of structural strength assessment of maritime leisure vessel. Therefore, The structural strength evaluation suitable for the domestic situation formulate and is applied to domestic regulations of "Guidance for Recreational Crafts" of Korea register of shipping(KR) & "Reinforced plastic line structure standards" of Ministry of Land, Transport and Maritime Affairs. the structural design and finite element analysis(FEA) to ensure the reliability.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.1-4
• /
• 2008

근년 일본, 캐나다, 호주, 미국, EU(주로 노르웨이, 영국) 등에서 인공위성을 이용한 해양 안전의 확보를 위한 연구개발이 진행되고 있으며, 일부 실해역 적용의 분야도 도출되고 있는 실정이다. 9.11테러 이후, 국제해사기구에서도 해상보안의 문제는 주요 이슈로 대두되어, 해상보안에의 활용 기술 개발이 먼저 시작되었다. 그 외, 밀입국 선박 감시 덴 해양오염 모니터링이 주요 활용분야이다. 간단하게 요약하면 다음과 같다. -노르웨이: Norwegian Defence Hesearch Establishment(NDRE)에서 주도적으로 선박 탐지 실험 및 기술 개발을 실시. 주로, ESA의 위성을 활용. 국가 보안의 목적으로는 적용을 하고 있음. -캐나다: 캐나다에서 소유하고 있는 RADARSAT을 이용하여 가장 많은 실험을 실시함. 영상을 처리하고 결과에 대한 평가를 수행하기 위한 시스템(Ocean Monitoring Workstation, OSM)을 개발하여 보급에 주력. -호주: 주로 캐나다의 위성 및 시스템의 적용을 하고 있음 영해 및 환경 감시의 역할을 수행. Coastwatch조직을 만들어 해상 감시활동을 하고 있음. -영국: 데이터 취득 후, 2.5시간 이내에 선박의 위치를 전송하는 인터페이스를 개발함. 일본의 경우, 다른 선진국에 비해서는 다소 늦게 시작되었다. 2003년 발간된 '재해 등에 대응한 인공위성이용기술에 관한 종합보고서'를 시작으로 정보수집위성 4기 및 지구관측위성을 이용한 해양 감시 활동이 시작되었다. 또한, 제 3기 과학기술기본계획(2006-2012)내에 해양 불법침입 탐지 기술 개발 항목이 반영되어 있다. 유럽의 해상보안서비스(MARISS)의 사용자 워크숍이 ESA ESRIN(이탈리아 프라스카티)에서 2008년 1월 22일 열렸다. 실질적인 내용은, '해상보안을 위한 우주 시스템'에 관한 것으로 인공위성 이용하는데 있어 설계안 및 데이터 이용 컨셉을 제시하는 것이었다. 여기서 중요한 것은 국가간의 협력이 절대적으로 필요하며, 기존의 시스템과의 통합에 있어 신뢰성을 어떻게 확보하는가에 있다고 할 수 있다. 또한, 보안과 환경모니터링의 기능이 분리되어 진행되고 있는 부분에 대한 정보 통합 방향도 제기되었다. 국내에서도 AIS와 SAR정보의 결합에 관한 검토는 이루어졌으며, 이를 바탕으로 EU와 같은 시스템의 구축(조직과 연구개발)을 위한 실질적인 검토가 필요하다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.119-120
• /
• 2021

Radio equipment for maritime service and navigation aids installed on fishing vessels are required to comply with the performance standards KN60945_60533 that apply IEC 60945. The LTE-M transceiver was excluded from the target because it did not belong to the radio equipment of the ship station, and it acted as a cause of audible noise in the radio equipment for maritime service installed in the fishing vessel due to interference by radiated emission or conducted emission. In this paper, we analyze the impact of interference based on related cases and present institutional solutions for the diversification of LTE-M.