• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.70-74
• /
• 2001

In this paper, we studied the maneuvering performances of a ship with flapped rudder. PMM tests were carried out for a ship model with horn type rudder or flapped rudder. The Abkowitz's model was used as a basic mathematical model to simulate the maneuvering motions. The maneuvering motions of a ship with flapped rudder were compared with those of a ship with horn-type rudder. As a result, it was found that the turning ability of a ship with flapped rudder was remarkably improved.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.193-199
• /
• 2013

Course keeping ability of ships under wave are analyzed with wave. The simulation with three degrees of freedom is developed and 3-D source distribution method is applied to get wave force for the simulation. The simulation is conducted with the restriction of maximum rudder angle and time delay of control and regular wave and irregular wave are considered as the source of external forces. Simulations with ships which have different maneuverability with tuned hydrodynamic coefficients are developed to assess the variation of the course keeping ability depending on the ship's maneuvering characteristics. The course Keeping ability is evaluated by comparison of distance while the ships are simulated with autopilot control.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.5-10
• /
• 2003

This paper is mainly concerned with the assessment of safe navigation between ships moving each other in restricted waterways. The manoeuvring simulation was conducted parametrically to propose an appropriate sage speed and distance, which is required to avoid sea accident under the different conditions, such as ship-velocity ratios, ship-length ratios, separation and stagger between ships. The manoeuvring characteristics based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in confined water.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.15-16
• /
• 2014

제한수역에서 측벽부근을 항행하는 대형선박에 미치는 측벽영향은 대단히 크고, 선박조종운동의 관점에서 보았을 때 상당히 중요한 문제이다. 이 연구에서는 측벽의 길이를 변화시키면서 측벽과 선박과의 종방향 및 횡방향 거리, 측벽의 길이 및 수심에 따른 측벽영향에 대하여 수치 계산하였다.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.369-376
• /
• 2019

Ship hydrodynamics in the confined waterways is challenging. When a ship is maneuvering in confined waterways, the hydrodynamic behavior may vary significantly because of the hydrodynamic interaction between the bottom of the ship hull and the seabed, or so-called shallow water effects. Thus, an accurate prediction of shallow water and bank effects is essential to minimizing the risk of the collision and the grounding of the ships. The hydrodynamic derivatives measured by the virtual captive model test provide a path to predicting the change in ship maneuverability. This paper presents a numerical simulation of captive model tests to predict the maneuverability of a ship in confined waterways. Also, straight and zig-zag simulation were conducted to predict the trajectory of a ship maneuvering in confined waterways. The results showed that the asymmetric flow around a ship induced by vicinity of banks causes pressure differences between the port and starboard sides and the trajectory of a ship maneuvering in confined waterways.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.315-320
• /
• 2006

It is well known that the ship manoeuvring motion is greatly affected by hydrodynamic forces and moments acting between two vessels passing too close to each other in confined waters, such as in a harbour or narrow channel. This interaction between two vessels could be assumed to be the functions of the longitudinal distance, transverse distance and their speeds. The aim of this study is to calculate the interaction between two vessels passing close to each other on parallel courses by simulation, and to estimate the effect of rudder action and time at collision through simulation under the condition of various longitudinal distances and different speed-ratios of the two vessels.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.55-60
• /
• 2006

It is well known tint the ship manoeuvring motion is greatly affected by hydrodynamic forces and moments acting between two vessels passing too close to each other in confined waters, such as in a harbour or narrow channel. This interaction between two vessels could be assumed to be the functions of the longitudinal distance, transverse distance and their speeds. The aim of this study is to calculate the interaction between two vessels passing close to each other on parallel courses by simulation, and to estimate the effect of rudder action and time of collision through simulation under the condition of various longitudinal distances and different speed-ratios of the two vessels.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.303-308
• /
• 2006

In this paper, the authors calculated manoeuvring motions of a large container vessel approaching to the newly built container piers to get alongside to her berth in Busan harbour. The motion calculations were done by using fixed coordinate system and the object of the calculations is to check the manoeuvring motions are safe or not for berthing the large vessel to her berth. The result of calculations manifested that a large container vessel can get alongside to the piers without any difficulty under normal weather conditions by using 2 Z. Peller tug boats of 4500 H.P. each and also these demonstrated it is difficult to conduct and get her alongside to the piers under rough weather conditions of wind force 16.9m/sec or more. Under rough weather conditions of 6 by beaufort scale the average wind velocity is about 13.5m and if we add 25% increase of the normal velocity to it, the wind will becomes a gust of 16.9m/sec. So it is advisable to avoid conducting a large container vessel to the pier under the rough weather conditions of 6 or more by beaufort scale. Also, I is better to use 3 Z. peller tug boats of 4500 HP. each under the above mentioned rough weather in a case of unavoidable circumstances.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.47-54
• /
• 2017

This paper analyzed the motion characteristics of two ships according to the ship's dimension using Ship Handling Simulator. When the panamax container ship passes the smaller ship, peak point and patterns of interaction forces for the moored ship are noticeable. Accordingly, special attention should be paid to the movements of moored ship because surge force and yaw moment changes in the opposite direction before and after condition of ship's beam. However, when the container ship passes the larger moored ship in reverse, peak point stood out on the passing ship at the beginning of ship-to-ship interaction and attraction force on the passing ship occurred steadily during 1L(length overall of passing ship) interval at a point of beam. In addition, as the lateral distance between the hull of two ships decreases less than 2B(breadth of passing ship), interaction forces on the passing ship at the beginning are sharply increase.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.348-357
• /
• 2024

Maneuvering performance is crucial for fishing vessels, especially under operational conditions that involve frequent course changes and weight variations due to catch. Small vessel accidents account for approximately 60% of maritime incidents as of 2022, mainly attributed to collisions and stranding accidents due to insufficient maneuvering performance. Especially, accidents that occur on small vessels less than 10 tons account for about 65% of all accidents. The absence of international standards presents challenges in accurately evaluating the maneuvering performance of small vessels. In this study, a 4.99-ton small fishing vessel was selected as the target, and a 3d-cad model was created. The commercial numerical analysis program STAR-CCM+ was employed to establish a simulation environment for the vessel's maneuvring motion. Based on this standard loading conditions and weight distribution were considered, 10° / 10°, 20° / 20° zigzag tests and 35° turning test were conducted. The results revealed a tendency for decreased yaw and course-keeping performance and improved turning performance as the hull weight increased. However, in partial arrival and full load departure condition, the manoeuvering performance were relatively poor. Based on this, the need for evaluation of maneuvering and standardized criteria of maneuvering performance for safe navigation of small vessels is presented. Furthermore, it is expected that the evaluation results of maneuvering performance in this study can serve as fundamental data for establishing criteria for evaluating the maneuvering performance of small vessels.