• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.69-70
• /
• 2013

Through shipbuilding industry and IT convergence, high effiency of production facilities and process will be achieved. Using LTE based communicator, variable sensing data obtained from shipyard cabe be transmitted to central server. This agent system can be applied to total monitoring, sail test, and accident prevention, etc.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.290-291
• /
• 2023

Outlier(이상치) 분석을 통한 등부표 선회안전반경 정보 제공에 관한 연구는 AIS 또는 RTU가 설치된 등부표에 대한 이탈 위험 인지, 항해안전 사고 예방 등 안전대책을 강화하기 위한 연구이다. 등부표는 조류, 바람 등 외력에 의해 이출거리가 발생하여 일정한 패턴으로 선회반경이 형성되나 외력으로 인하여 정상범위에서 벗어나 유실, 위치이동 등이 발생할 수 있고 이는 선박추돌 등 항해안전 사고로도 이어질 수 있다. 이러한 등부표 사고는 물적 피해비용과 이용자의 안전운항에 대한 심리적 부담감 또는 위험감수 등의 추가적인 행정소요 비용이 발생할 수 있다. Outlier(이상치)란 외력 등으로 인해 최대 이출거리 이내 정상범위에서 벗어나거나 존재할 수 없는 극단적인 위치 값으로써 21년도 등부표 위치 데이터를 일정 단위 방위별로 분석해 본 결과 Outlier(이상치)가 식별되었다. 따라서 등부표의 안전한 위치 상태를 시스템적으로 모니터링 하기 위해 Outlier(이상치) 분석을 통한 등부표 선회안전반경 정보 제공에 관한 연구를 하였다.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.166-171
• /
• 2021

An active mount is devised in same geometric constraints with a conventional rubber mount. The proposed mount features the piezoelectric actuator which can be used to reduce the vibration at marine vessels or automotive vehicles. As a first step, a passive rubber mount is adopted and its dynamic characteristics are experimentally evaluated. Based on the geometry of the rubber mount, a rubber element for the active mount is manufactured and integrated with two piezostacks in series, in which the piezostack is operated as an inertial type of actuator. A conventional PID controller featured by the simple and easy implementation, is then designed to attenuate the non-resonant high frequency vibration transmitted from the base excitation. Finally, the control performances of a proposed active mount are evaluated in the wide frequency range and compared with those of the conventional rubber mount.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2022

Drones, one of the 4th industrial technologies that are expanding from military use to industrial use, are being actively used in the search missions of the National Police Agency and finding missing persons, thereby reducing interest in a wide area and the input of large-scale search personnel. However, legal review of police drone operation is continuously required, and the importance of advanced system for related operations and analysis of captured images in connection with search techniques is increasing at the same time. In this study, in order to facilitate recording, preservation, and monitoring in the concept of precise search and monitoring, it is possible to achieve high efficiency and secure golden time when precise search is performed by constructing spatial information based on photo rather than image data-based search. Therefore, we intend to propose a spatial information construction technique that reduces the resulting data volume by adjusting the unnecessary spatial information completion rate according to the size of the subject. Through this, the scope of use of drone search missions for large-scale areas is advanced and it is intended to be used as basic data for building a drone operation manual for police searches.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.221-230
• /
• 2020

Elevators, an important vertical means of transportation used daily, have enriched the city into a state-of-the-art giant skyscraper forest. The purpose of this study is to analyze problems about elevator safety and present engineering and legal improvement measures. The research method adopted the important engineering elements that make up elevator safety and the elevator safety law and the method of analyzing the papers already studied. Based on his experience as a policy advisor to the Korea Elevator Safety Authority, he analyzed the problems of the related statutes, focusing on the construction, electrical, electronic, information and communication, and the elevator safety law, which comprise the elevator safety system. As a result of the research, it was suggested that the so-called legal engineering system should be established through the convergence of laws and disciplines related to elevator safety. This study is expected to be an alternative to establishing an engineering and legal convergence system for elevator safety in the future.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.54-61
• /
• 2022

Ship is a huge system including a variety of pipe arrangements. Pipes are installed according to the design layout, however the end poistion of pipes are not well matched owing to its measurement and construction errors. In this situation, the customized pipe fitting is frequently designed to connect with both pipes, the position of which are manually measured. This paper focused that these two coordinates are measured by point cloud from RGBD sensor and the relative transformation induced by positional and orientational differences is calculated by inverse kinematics in robotics theory. Therefore, the result applies for the methodology of the pipe connection design. The pipe coordinate that is estimated by the matching and the probabilistic RANSAC method will be verified by experiments. The kinematic design parameters are computationally calculated by using the minimum degree of freedom that connects both pipe coordinates.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.916-925
• /
• 2009

4S (Ship to Ship, Ship to Shore) communication is the key to strategic development of e-navigation, a core element of IT vessel convergence. 4S communication is intended to integrate and standardize various communication infrastructures on land and communication equipment complying with communication equipment equipped in ships. This paper aims to apply the Korean technology IEEE 802.16e adopted as an international standard, to replace and compensate for existing vessel communication media such as low speed HF/MF/VHF to the ocean environment. To this end, various experimental conditions between the coast station where a relay station was installed and related equipment equipped on a ship are set. Communication signals were monitored and the RSSI and CINR were measured. Based on experimental analysis and results, various challenges and solutions which may occur in ocean environment were sought, and communication availability was analyzed through transmission data throughput, at the maximum effective distance range of the signal. It was proven that high speed multimedia data could be exchanged for up to 20 km even among 80km kph ships moving around near the sea, ensuring that this technology could be applied to the ocean environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.20-29
• /
• 2021

This study developed a smartwatch and a wind speed system in accordance with the necessity of a device that provides the information required in marine leisure. Based on a marine leisure smartwatch with a multi-sensor, a gyro box, and a wind speed system, external data such as GPS, motion, humidity, temperature, air pressure, and heart rate can be collected. In addition, the collected external environment data can be managed through an application on a smartphone, which is an Android-based mobile device. The developed smartwatch and wind speed system are expected to contribute to increasing accessibility and revitalization of the marine leisure industry. In addition, in terms of safety and education, the need for a device that provides marine information is large, so it is expected to increase the possibility of entering the high value-added market and improve the product localization rate.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.57-63
• /
• 2021

The purpose of this study is to develop a Smart Helmet to safeguard forest firefighting crews and provide on-site information in real time. The Smart Helmet for forest firefingting crews is equipped with a camera, video/voice communication module, GPS, Bluetooth, and LTE module to promote the safety of them, and through the Smart Helmet, the site situation is is transmitted in real time, and full duplex communication is possible. As a result of testing using the Smart Helmet, the control center was able to receive on-site information and communication with on-site forest firefighting crews. Through site evaluation and user evaluation, it was confirmed that the Smart Helmet needs to be improved. The developed Smart Helmet can be used in various ways in forest disasters and forest industry.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1283-1297
• /
• 2023

Mid-wave infrared (MWIR) imagery, due to its ability to capture the temperature of land cover and objects, serves as a crucial data source in various fields including environmental monitoring and defense. The KOMPSAT-3A satellite acquires MWIR imagery with high spatial resolution compared to other satellites. However, the limited spatial resolution of MWIR imagery, in comparison to electro-optical (EO) imagery, constrains the optimal utilization of the KOMPSAT-3A data. This study aims to create a highly visible MWIR fusion image by leveraging the edge information from the KOMPSAT-3A panchromatic (PAN) image. Preprocessing is implemented to mitigate the relative geometric errors between the PAN and MWIR images. Subsequently, we employ a pre-trained pixel difference network (PiDiNet), a deep learning-based edge information extraction technique, to extract the boundaries of objects from the preprocessed PAN images. The MWIR fusion imagery is then generated by emphasizing the brightness value corresponding to the edge information of the PAN image. To evaluate the proposed method, the MWIR fusion images were generated in three different sites. As a result, the boundaries of terrain and objects in the MWIR fusion images were emphasized to provide detailed thermal information of the interest area. Especially, the MWIR fusion image provided the thermal information of objects such as airplanes and ships which are hard to detect in the original MWIR images. This study demonstrated that the proposed method could generate a single image that combines visible details from an EO image and thermal information from an MWIR image, which contributes to increasing the usage of MWIR imagery.