• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.93-93
• /
• 2017

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.236-241
• /
• 2013

It requires long time and high cost for an apprentice engineer to reach the level of getting various experiences of engine space machinery and preparing for emergency situations. Therefore reducing the time and cost, several types of simulator that give the very similar surroundings to the ship engine room, relevant to STCW-95 are used for systematic education and training to get many experiences and good judgement in emergency. Since most simulators that are operated in Korea were imported from foreign countries, it is difficult to directly implant the amendments of STCW Convention and reflect International Maritime Organization (IMO) model courses. This study describe a development of marine auxiliary boiler simulator that makes the apprentice engineer easier to understand the relationship between equipments in steam system such as auxiliary boiler, exhaust gas boiler, and steam turbine.

• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2022

The product to be developed in this study is a heat recovery device which generates steam or hot water at high temperature and high pressure by heating water using exhaust gas from diesel engine, gas engine, gas turbine, etc. as an exhaust gas boiler off heat boiler(EGB) type for ship and power generation. The steam vapor or the created warm water is used as the power source required for the steerage heating and hot water facility or the HFO heating of the ship, and the turbine drive. The principle of waste heat boilers serves to heat water as high temperature exhaust gas with heat pass through the tube of the boiler. The heated water is a structure that is sent to a cabin or turbine device in the form of steam. In this study, the objective of this study is to maximize the efficiency by increasing the heat transfer surface by replacing the tube which is the heat transfer part of EGB with the plate tube.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.89-94
• /
• 2003

As ship's fuel oil recently becomes viscous and the amount of sludge increases, many researches and studies are underway to process the sludge onboard the ship and to recycle it as a fuel for ship's boiler. Of many researches, especially ultrasonic emulsifier to break the particle of sludge into fine pieces is recognized as a most possible recycling device. In this regards, the author investigates the property change of sludge's temperature and pressure at the early stage of the study of ultrasonic emulsifier. This study can be used as a useful dora to determine the proper temperature and pressure to inject the processed sludge in the boiler injector and the results can also be comparable dora with the experimental data by ultrasonic emulsifier. In addition, the results will be a fundamental data to study the filtering efficiency of the sludge particle broken by temperature and pressure. It is expected that this study ultimately play a role to prevent marine oil pollution as the sludge is recycled onboard the ship and used as a fuel for boiler.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.232-232
• /
• 2012

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.447-448
• /
• 2003

SOx 등과 함께 대기오염 발생에 가장 크게 관여하는 NOx를 제거 하고자 오래전부터 지금까지 많은 연구가 수행되어 왔다. NOx가 배출되는 유형에 따라 발전소, 보일러 및 산업체와 같은 고정원에서 배출되는 경우와 자동차나 선박과 같은 이동원에서 배출되는 두 가지의 경우가 있다. 고정원에서 NOx를 제거하는 가장 효율적인 방법은 암모니아에 의한 NOx의 선택적 제거법(Selective Catalytic Reduction)으로 알려져 있다. (중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.884-887
• /
• 2009

최근에 경기악화에 따른 석유수요 감소로 우리가 주로 수입하는 두바이유는 배럴당 56 달러선이지만, 유가가 배럴당 100~120 달러로 오를 경우, 원유 대체 및 신규 에너지원 확보를 위해 Bitumen, Oil Shale, 중질잔사유 등 고점도 액상연료를 이용하기 위한 기술개발이 활발히 진행될 것으로 예상된다. 그리고 이에 따라 연소효율이 떨어지는 고점도 저급연료를 이용하여 연소효율을 극대화시키기 위해 계면활성제를 이용하여 화학적으로 유화시키는 기술들이 개발되어 있다. 본 연구에서는 고점도 유체에 대해 계면활성제를 이용하지 않고 캐비테이션 방식을 이용하여 고점도 유체를 에멀젼화 하는 기술을 연구하였다. 에멀젼화 기술은 저급연료유에 물을 혼합하여 안정적으로 장기간 유수분리가 일어나지 않으며, 복합연료로서 반응로에서 연소시킴으로써 연소율을 개선시킬수 있는 기술인데, 발전소의 보일러, 선박, 소각로 등에 적용할 수 있으며 중질잔사유를 사용하는 가스화 발전에도 본 기술이 사용될 수 있을 것으로 기대된다.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.363-366
• /
• 2006

Various kinds of ships(Cargo ship, Passenger ship, Training ship, Special ship etc.) are operated to transport cargo or passengers at sea in the world. Most of the important auxiliary machinery which is installed are fluid machinery in those ships. A large percentage of fluid machinery is pumps which are classified turbo and non-turbo type. While much previous research has focused on pumps for shore use, very little is known about ship's pump. In order to develop an understanding of ship's pump, we introduce common pumps used in every ship and special pumps based on ship's type. This exploratory study lays the groundwork for further investigation of ship's pumps

• Korean Journal of Labor Studies
• /
• v.24 no.2
• /
• pp.321-365
• /
• 2018

Though the British shipbuilding industry dominated the world market in the 19th century, it could not avoid the repetitive rise and fall of the unemployment following after the cyclical fluctuations. Without challenging the employers' rights to fire at will, the boilermakers maintained their own unemployment insurance in order to escape from the new poverty law system. In the beginning the craft union could continue their own unemployment insurance under the National Insurance Act of 1911, but it went into bankruptcy under the massive unemployment of the 1920s and the attacks of shipyard employers. The Act of 1911 was a step towards social solidarity in that it spread the risks beyond the occupational boundaries, applying unemployment insurance to unskilled and non-union workers, and the employer and the government also paid the premium. In the Great Depression, the shipyard trade unions demanded that the government should intervene in the shipbuilding market to provide jobs, but it was not accepted by the government. The government responded only to the another demand of the union for the maintenance, which could be achieved partially through the abnormal operation of the insurance system, abandoning the insurance principle. After all, unemployment in the shipbuilding industry was resolved only by the expansion of rearmaments and the outbreak of World War II. From the 19th century to the World War II, the craft unions did not challenge the employers' right to fire at will and did not attempt to regulate dismissal procedures or make any demands on dismissal compensations. During interwar periods rules and practices related with weak employment protection - one of the main features of the liberal employment adjustment institution - were prevalent in Britain. The principle of 'employment at will' could survive through the historical events such as the World War I, II as the operation of the unemployment insurance became the focus of the social conflicts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.590-599
• /
• 2011

The electrification of the waste heat of fuel cell is necessary to enhance the efficiency of fuel cell system. For this purpose, the SOFC/ST(Solid oxide fuel cell/Steam turbine) hybrid system is suitable. The purpose of this work is to predict the performance of methane fueled SOFC/ST hybrid power system and to analyze the influence of operating temperature of stack, current density of stack, combustor outlet gas temperature, and boiler outlet gas temperature. According to the analysis, it is proved that making the best use of the waste heat of stack and minimizing the fuel consumption of combustor are essential for the high-efficiency of SOFC/ST hybrid system.