• The Journal of Society for e-Business Studies
• /
• v.17 no.2
• /
• pp.149-163
• /
• 2012

Logistics systems provide their service to customers by coordinating the resources with limited capacity throughout the underlying processes involved to each other. To maintain the high level of service under such complicated condition, it is essential to carry out the real-time monitoring and continuous management of logistics processes. In this study, we propose a method of estimating the service completion time of key processes based on process-state information collected in real time. We first identify the factors that influence the process completion time by modeling and analyzing an influence diagram, and then suggest algorithms for quantifying the factors. We suppose the container terminal logistics and the process of discharging and loading containers to a vessel. The remaining service time of a vessel is estimated using a decision tree which is the result of machine-learning using historical data. We validated the estimation model using container terminal simulation. The proposed model is expected to improve competitiveness of logistics systems by forecasting service completion in real time, as well as to prevent the waste of resources.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.597-603
• /
• 2014

The cargo of ships and offshore structures is the number of oil of combustibility and volatile, oil processing cargo. Furthermore heavy cargo of the vehicle or container box or bulk cargo are occupied the remainder of cargo. In addition, there is a possibility to move the location of the cargo and the vessel because it is received periodic / non-periodic a load of wave and ocean current. Therefore a shipboard hazard is much greater than onshore industry hazard. Monitoring and preparation for safety are necessary things because there is always risk of accidents arise from the impact of the freight and cargo of ships and offshore structures. In this study, we conducted a study with respect to the introduction of the wireless sensor network monitoring system to ensure the safety of the crew and workers on shipboard.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.253-255
• /
• 2007

비파괴검사방식 중 자기누설 탐상법(Magnetic Flux Leakage, MFL)은 선박의 표면이나 인간의 손이 닿지 않는 곳의 부식상태를 파악하기에 적합한 방법이다. 실시간 모니터링 가능한 자기누설 탐상 시스템은 빠르고 정확한 검사가 요구되는 대형 선박의 교면 검사에서 유용하게 사용될 것으로 예상된다. 본 논문에서는 스파이더형의 소형 비파괴 검사기를 실시간 모니터링이 가능하도록 제작하였다.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1173-1183
• /
• 2023

Over the past 20 years, Korea's overall import and export cargo volume has increased at an average annual rate of approximately 5.3%. About 99% of the cargo is still being transported by sea. Due to recent increases in maritime cargo volume, congestion in maritime logistics has become challenging due to factors such as the COVID-19 pandemic and conflicts. Continuous monitoring of ports has become crucial. Various ground observation systems and Automatic Identification System (AIS) data have been utilized for monitoring ports and conducting numerous preliminary studies for the efficient operation of container terminals and cargo volume prediction. However, small and developing countries' ports face difficulties in monitoring due to environmental issues and aging infrastructure compared to large ports. Recently, with the increasing utility of artificial satellites, preliminary studies have been conducted using satellite imagery for continuous maritime cargo data collection and establishing ocean monitoring systems in vast and hard-to-reach areas. This study aims to visually detect ships docked at berths in the Busan New Port using high-resolution satellite imagery and quantitatively evaluate berth utilization rates. By utilizing high-resolution satellite imagery from Compact Advanced Satellite 500-1 (CAS500-1), Korea Multi-Purpose satellite-3 (KOMPSAT-3), PlanetScope, and Sentinel-2A, ships docked within the port berths were visually detected. The berth utilization rate was calculated using the total number of ships that could be docked at the berths. The results showed variations in berth utilization rates on June 2, 2022, with values of 0.67, 0.7, and 0.59, indicating fluctuations based on the time of satellite image capture. On June 3, 2022, the value remained at 0.7, signifying a consistent berth utilization rate despite changes in ship types. A higher berth utilization rate indicates active operations at the berth. This information can assist in basic planning for new ship operation schedules, as congested berths can lead to longer waiting times for ships in anchorages, potentially resulting in increased freight rates. The duration of operations at berths can vary from several hours to several days. The results of calculating changes in ships at berths based on differences in satellite image capture times, even with a time difference of 4 minutes and 49 seconds, demonstrated variations in ship presence. With short observation intervals and the utilization of high-resolution satellite imagery, continuous monitoring within ports can be achieved. Additionally, utilizing satellite imagery to monitor changes in ships at berths in minute increments could prove useful for small and developing country ports where harbor management is not well-established, offering valuable insights and solutions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.113-114
• /
• 2022

자율운항선박 원격제어시스템 구현을 위해 첨단장비와 안전한 시설을 갖추고, 특수목적선 코드를 적용해 감항성능 및 안전성이 매우 우수한 9,196톤의 아시아 최대 실습선인 한나라호를 실험선으로 활용하고 있다. 현재 한나라호와 육상간 원격제어를 위한 H/W 시스템이 설치되었으며, 지난 n항차 동안 통신네트워크 즉, VSAT, LTE, WIFI를 통해 원격제어에 필요한 데이터를 송수신하였다. 본 연구에서는 송수신된 데이터 분석을 통해 한나라호와 육상 간의 원격제어 및 통신네트워크의 문제점 식별하고, 이에 대한 대안방안 등을 제시하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2800-2805
• /
• 2013

In preperation for the compulsory installation of VHF(Very High Frequency) wireless equipment and fishing vessel automatic identification system according to the revision of "The Ships Safety Act" and "Fishing Vessel act", Fishery Information & Communication Department of National Federation of Fisheries Cooperatives is building VHF communication network and automatic identification system for fishing vessel monitoring. This study suggests the protocol analysis for the calling of location requirement using DSC(Digital Selective Calling) function and show best way for fishing vessel automatic identification system. Also, it suggest way to realize fishing vessel monitoring system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.274-276
• /
• 2017

Korean e-Navigation is a system that introduced to reduce maritime accidents. In order to reduce marine accidents, Korean e-Navigation provides the following services-"Vulnerable Vessel Monitoring", "Vulnerable Vessel support & monitoring", "Optimal safety route", "ENC Streaming for Small Vessel", "Tug & Barge Support", "Maritime Safety Information Providing". Each Service is a system separated into finctional units and integrated into Korean e-Navigation. Korean e-Navigation is introducing data middleware to integrate each service and the DDS(Data Distribution Service) is judged to be effective. Thus, this paper analyzed the characteristics of DDS middleware types suitable for each service of e-Navigation.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.233-238
• /
• 2007

In this paper, a wireless sensor network system was embodied inside the shipping for digital ship. First, the analysis of radio environment inside ship are investigated. As a result, it was confirmed that a wireless sensor network system can be applied inside the ship. Using Shipboard Wireless Sensor Network System based on IEEE 802.15.4 technique, we designed, and made the prototype of Zigbee Node and RFID Reader. We could be sensing on shipboard and testing entrance of crew by using Zigbee Node and RFID Reader. The sensing and exit or entry control data are transmitted a server system through internet that connected Wireless Gateway with AP, so we can monitoring the saved data on shipboard database.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1015-1017
• /
• 2012

본 논문은 컨테이너 터미널의 컨테이너 정보를 RFID를 통하여 획득하고 이 정보를 바탕으로 효율적인 선적 하역작업을 스케줄링하는 시스템에 관한 연구이다. 유비쿼터스의 핵심기술인 RFID(Radio Frequency ID)전자태그 시스템을 이용하여 컨테이너를 효율적으로 선적 할 수 있게 돕고, 운송 과정에서 컨테이너의 실시간 관리가 가능한 시스템으로, 컨테이너 선적의 신속성과 정확성을 강화하여 컨테이너를 효율적으로 관리하는 것을 목적으로 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.737-740
• /
• 2001

We develope the PC based SPS to improve safety at sea, save fuel and time during a voyage and makes mariner's work more efficient and comfortable in ship navigation, who propose the auto-navigation system with SPS as basic main system. Developed SPS operate the function to monitor navigational equipment and to substitute a broken main navigational equipment such as CIS, ECDIS, or Radar/ARPA, automatically. These can be improve more efficient and comfortable ship navigation and reduce these traffic accident. The SPS has the function as DB and network server, additionally.