• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.122-124
• /
• 2013

최근 쌍동형 선박의 운동성능이 우수함에 따라 대형화가 이루어지고 있으며, 이에 따른 다양한 해상상태 변화에 따른 운동성능의 평가를 요구하고 있다. 쌍동형 선박의 경우 횡동요에서 매우 우수한 운동성능을 나타내고 있으나 선박규모의 대형화에 따른 운동성능의 추가적인 계산이 필요하다. 본 연구에서는 60피트급 쌍동형 선박의 종운동성능을 선속과 파랑조건에 따라 추정 및 성능검토를 수행하고자 한다. 선수 및 선미 형상변화가 종운동성능에 미치는 영향을 알아보기 위하여 Pitch 운동성능을 추정하였으며 그 결과를 분석하고자 한다. 이를 위해 사례선을 적용하고 이를 기반으로 성능검토를 수행하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.12-15
• /
• 2011

The most widely used kerosene-LOx liquid-propellant rocket engines in these days have a similar engine schematic to those of the past because of the development cost and the reliability. The efficiency of engines could be increased by the factors such as a cooling method, engine cycles, shape of cooling channels, additional coolant and so on. In this article, it is described that some design ideas for performance enhancement by exchange kerosene with LOx of a coolant.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.28-39
• /
• 1991

A study on the optimization problems to find forebode shapes with minimum wavemaking and frictional resistance was performed. The afterbody was fixed as a given hull and only forebode offsets were treated as design variables. Design variables were divided into the offsets of given hull and small variation from them. For the wavemaking resistance calculation, Neumann-Kelvin theory was applied to the given hull and thin ship theory was applied to the small variation. ITTC 1957 model-ship correlation line was used for the calculation of frictional resistance. Hull surface was represented mathmatically using shape function. As object function, such as wavemaking and frictional rersistance, was quadratic form of offsets and constraints linear, quadratic programing problem could be constructed. The complementary pivot method was used to find the soulution of the quadratic programing problem. Calculations were perfomed for the Series 60 $C_{B}$=0.6. at Fn=0.289. A realistic hull form could be obtained by using proper constraints. From the results of calculation for the Series 60 $C_{B}$=0.6, it was concluded that present method gave optimal shape of bulbous bow showing a slight improvement in the wave resistance performance at design speed Fn=0.289 compared with the results from the ship theory only.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1070-1077
• /
• 2022

The International Maritime Organization has recently strengthened its marine environment regulations. The energy efficiency index has long been an important indicator of ship design, and now, energy efficiency is being enforced for existing ships as well as new ships. To increase the energy efficiency of existing ships, methods such as retrofitting the bow bulb, selecting an optimized trim during ship operation, and installing an energy saving device have been applied. In this study, the ship resistance was numerically simulated using computational fluid dynamics (CFD) under various bow and stern trim conditions. In addition, the bulb was redesigned to further improve the resistance performance under the selected trim conditions. When the improved bulb was applied, the effective horse power increased by approximately 5%. It is, however, necessary to verify whether the redesigned bulb can reduce ship resistance in waves.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.11-12
• /
• 2015

두 선박이 정면에서 마주치며 선박간 상호 통항하거나 상대선을 추월할 경우 각 선박의 선체형상과 선속에 의한 유체력 상호작용에 따른 선박간 간섭력이 발생한다. 선박간 간섭력의 주요한 평가 요소인 횡력과 회두 모멘트의 측정을 통해 두 선박이 근접하였을 때의 위험도와 충돌을 예측할 수 있다. 선행된 간섭력에 관한 연구는 대부분 경험에 의하거나 이론적인 측면에서 관련 연구가 진행되어왔으며, 학계에서 통상적으로 널리 알려진 뉴턴의 연구(1960)에서는 깊은 수심에서 두 선박을 평행하게 항주시켰을 때 선박간 최대 흡인력은 두 선박이 정횡으로 나란하게 위치되는 지점에서 발생하고, 이때의 간섭력은 선속의 제곱에 비례한다고 추정하였다. 현대의 조선기술이 발전함에 따라 선박의 크기는 점점 대형화되고 선박의 운항 효율성 증진을 위한 다양한 선형이 개발되어 실선에 적용되고 있다. 이런 경향에 따라 과거에 비해 현대 선박 운항환경에서의 선박간 간섭은 선박의 크기 및 선형에 의한 영향이 클 것으로 판단된다. 본 연구에서는 선박의 종류별로 대표 선종을 선정하여 두 선박이 정면에서 마주치며 통과하는 운항조건에서의 선속 증가에 따른 선박 상호간 간섭력의 변화를 통상적으로 사용되는 선박조종시뮬레이터를 이용하여 실험 및 분석하여 상관관계를 도출하였다. 선박 유형에 따른 시뮬레이션 실험 결과 최대 횡력은 주로 선미 부근에서 발생하였고 최대 회두모멘트는 선수가 근접할 때 발생하였으며, 선속이 증가할수록 선박 상호간 근접거리가 좁혀졌고 선형별로 각기 다른 선속에서 선미 충돌이 발생하였다. 이 실험연구는 선형에 따른 선박 상호간 근접 시의 횡거리와 통과속력에 대한 기준 설정의 연구 근간을 마련하였고 선박간 교항시 안전운항을 위한 지침이 될 것으로 판단된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.97-104
• /
• 2009

Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.58-58
• /
• 2009

선박의 선체부분인 선수, 선미 등을 이루고 있는 곡형 외판의 제작은 강판을 원하는 형상으로 성형하기 위하여 벤딩롤러 및 유압프레스를 이용한 냉간가공과 산소-프로판가스 화염을 적용한 선상가열, 삼각가열을 이용한 열간가공으로 크게 구분할 수 있다. 선상가열을 이용한 곡면가공의 원리는 가열토치를 이용하여 강판을 가열하면 가열부는 팽창하게 되고 냉각시에는 수축하게 된다. 이 때 두께방향으로의 소성변형으로 인한 수축량의 차이로 인해 굽혀지게 된다. 최근에는 선박이 고기능 및 대형화로 인해 3차원 곡형 외판 형상이 복잡해지고, 강도를 향상시키기 위하여 합금원소(C, Nb, V, Ti)를 첨가하거나 열처리(노말라이징)를 이용한 고장력강재인 중후판의 적용이 증가하고 있다. 이러한 고강도강재를 선상가열공정으로 제작한 곡형 외판재는 가열, 냉각의 열사이클로 인해 취화되어 인성이 저하 될 수 있다. 본 연구에서는 Normalizing 열처리재인 490MPa급 강재를 이용하여, 현장에서 작업자의 미숙련으로 인해 발생 할 수 있는 최대의 가혹한 조건과 재질에 큰 영향을 미치지 않는 범위를 선정하여 선상가열시의 가열, 냉각조건에 따른 강재의 재질특성을 조사하고자 한다. 이를 위해 가열시 가열부위의 정확한 온도 측정에 역점을 두었으며, 각각 다른 선상가열 조건에 따른 시편을 제작하기 위하여 선상가열 실험장치를 제작하였다. 선상가열 실험 결과 최고가열온도 $1300^{\circ}C,\;950^{\circ}C$에서 수냉 조건인 경우 급격한 인성저하 현상이 발생하며 비록 공냉이라 하더라도 결정립 조대화로 인성 저하가 발생하였다. $800^{\circ}C$가열 후 수냉개시온도를 $700^{\circ}C$이하로 수냉한 경우에는 인성 저하 현상이 개선되고 있음을 알 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1109-1112
• /
• 2015

A milatary ship without degaussing coil has a vertical magnetization to compensate magnetization induced by the vertical magnetic field component of earth magnetic field during demagnetization process. Flash D is very useful to acquire vertical magnetization. However this is hard to predict vertical magnetization. This experiment was investicated on another method, which used the only vertical bias magentic field. The specimens were prepared by thin Zn coated steel sheet with a thickness of 0.15mm. The shapes of 3 specimes was rectangular, triangular and circular cylinders. These shapes were corresponded to the shapes of bow, mid and stern of a vessel. Through FEM analysis, the difference of magnetic signatures for these specimens was recognized and the residual magnetization curve was measured. magnetic field was generated by a solenoid coil and magnetic signature was measured by a magnetic field sensor. A linearity between a vertical bias magnetic field and a vertical manetzation existed and the vertical magnetization of a miltary vessel was predicted by the linearity.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.29-40
• /
• 1989

A new blade section of propeller is developed to obtain higher propeller efficiency and better cavitation performance. Eleven foil sections are carefully designed and manufactured to compare the lift-drag characteristics and cavitation performances. It is expected that the developed section behaves better in the vicinity of the ship's wake, where the angle of attack variation is large, because of its wider width in lift-drag and cavitation-free bucket diagrams. A propeller design method using the selected foil section is presented. Three chordwise loading shapes are selected to investigate the influence of the lift-drag ratios on the propeller efficiencies and cavitation performances. Three propellers are designed, which correspond to the selected chordwise loading shapes. Two more propellers which use existing foil sections are designed to compare the section performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.14-22
• /
• 2001

This paper presents the results of hull form design and powering performance for a 2.500 ton class trimaran frigate. A series of resistance tests and numerical calculations have been conducted to figure out the influences of side-hull form and position on the resistance characteristics of the trimaran. And the propulsion test was conducted to investigate the propulsion efficiency of the trimaran, and the powering performance of the trimaran was compared with that of the similar mono-hull ships in full scale. From the research it was found that the longitudinal position of side-hull had a large influence on the resistance characteristics of the trimaran while the side-hull form and transverse position had a small influence on it. The trimaran showed favorable resistance performance when the side-hull was located near the stern of trimaran, which was resulted from the fact that the side-hull stem was located near the primary wave hollow generated by the main hul1. The powering performance of the trimaran was superior to that of the similar mono-hull ships above the middle speed range.