• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.76-90
• /
• 2022

The platooning refers to a form in which one or more following vehicles along the path of the leading vehicle(directly driven by the driver) drive in one platoon using V2V, V2I communication and vehicle-mounted sensor. Platooning has emerged in line with the increasing demand for cargo volume and advanced transportation logistics systems, and is expected to have effects such as increasing capacity, reducing labor costs, and reducing fuel consumption. However, compared to general passenger cars, research on autonomous driving of trucks and verification of their effects are insufficient. Therefore, in this study, meta-analysis was conducted on the theme of the effect of truck platooning, and the results of existing studies related to platooning effects were integrated into one reliable, generalized, and objective summary estimate. In conclusion, it was analyzed that the introduction of truck platooning would have an effect of 13.93% increase in capacity, 38.76% decrease in conflict, and 8.13% decrease in fuel consumption.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.175-176
• /
• 2017

본 논문은 전기자동차용 고전압 배터리에서 차량용 저전압 배터리를 충전하는 분산형 LDC 모듈의 병렬 운전에 대해 기술한다. 제안하는 LDC 모듈은 각각의 고전압 배터리 모듈마다 적용되며, 소용량의 PCB 타입으로 제작되었다. 이는 전기자동차에서 요구하는 배터리 용량에 따라 다병렬로 구성할 수 있는 용이함을 가진다. 실험을 통해 분산형 LDC 모듈의 병렬 운전을 확인하고, 부하량에 따른 효율을 검증하였다.

• The Safety technology
• /
• no.173
• /
• pp.15-17
• /
• 2012

대신기업(주)은 1972년 경부고속도로 개통과 함께 설립된 회사다. 우리나라 휴게소 중 가장 긴 역사를 가지고 있는 곳으로, 고속도로 휴게문화의 발전을 선두에서 이끌어온 기업이라고 해도 과언이 아니다. 이 중 칠곡영업소(이하 칠곡휴게소)는 부산기점으로 157km지점에 위치하고 있다. 장시간 운전으로 피로에 쌓인 고속도로 이용객들을 대상으로 식음료 및 기타 생활용품을 판매하고, 도로안내 및 편의시설을 제공하는 고속도로 휴게소 업체다. 고속도로 상에서 운영되는 특성상 이곳에서 가장 중요하게 내세우는 가치는 당연 '안전'이다. 직원들의 안전은 물론, 고속도로에서 차량을 운행하는 고객들의 안전까지 최대한 신경 써야 하기 때문이다. 우리나라에서 현존하는 가장 오래된 휴게소로, '안전'을 최우선 가치에 두고 휴게소를 운영하고 있다는 칠곡 휴게소를 찾아가 봤다.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.454-459
• /
• 2013

Pressure waves are generated and propagate in a tunnel when train enters tunnel high speed. A compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as an expansion wave. An expansion wave due to the entry of the train tail propagates along the tunnel and is reflected at tunnel exit as a compression wave. These pressure waves are repeatedly propagated and reflected at the tunnel entrance and exit. Severe pressure changes causes ear-discomfort for passengers in the cabin and micro pressure waves around the tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnels qualitatively and quantitatively, because pressure change rate is considered as one of the major design parameters for optimal tunnel cross sectional area and repeated fatigue force on car body. In this study, we developed a characteristics method based on a fixed mesh system and boundary conditions for crossing trains and analyzed this system using an X-t diagram. The results of the simulation show that offsetting of pressure waves occurs for special entry conditions of a crossing train.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.276-282
• /
• 2005

These studies developed system as well as its algorithm which can measure traffic flow and vehicle speed on the highway as well as road by using industrial television(ITV) system. This algorithm used the real time processing of dynamic images. The processing algorithm of dynamic images is developed and proved its validity by frame grabber. Frame grabber can process the information of a small number of sample points only instead of the whole pixel of the images. In the techniques of this algorithm, we made approximate contour of vehicle by allocating sampling points in cross-direction of image, and recognized top of contour of vehicle. Applying these technique, we measured the number of passing vehicles of one lane as well as multilane. Speed of each vehicle is measured by computing the time difference between a pair of sample points on two sample Points lines.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.10-18
• /
• 2005

These studies developed system as well as its algorithm which can measure traffic flow and vehicle speed on the highway as well as road by using industrial television(ITV) system. This algorithm used the real time processing of dynamic images. The processing algorithm of dynamic images is developed and proved its validity by frame grabber. Frame grabber can process the information of a small number of sample points only instead of the whole pixel of the images. In the techniques of this algorithm, we made approximate contour of vehicle by allocating sampling points in cross-direction of image, and recognized top of contour of vehicle. Applying these technique, we measured the number of passing vehicles of one lane as well as multilane. Speed of each vehicle is measured by computing the time difference between a pair of sample points on two sample points lines.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.436-441
• /
• 2012

Pressure waves are generated and propagate in tunnel when train enters a tunnel with high speed. Compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as expansion wave. While expansion wave due to the entry of train tail propagates along the tunnel and is reflected at tunnel exit as compression wave. These pressure waves are repeatedly propagated and reflected at tunnel entrance and exit. Severe pressure change per second causes ear-discomfort for passengers in cabin and micro pressure wave around tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnel qualitatively and quantitatively, because pressure change rate is considered as one of major design parameters for an optimal tunnel cross sectional area and the repeated fatigue force on car body. In this study, we developed the characteristics method analysis based on fixed mesh system and compared with the results of real train test. The results of simulation agreed with that of experiment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.42-54
• /
• 2018

This study is to establish the traffic volume-based warrants of left-turn lanes in unsignalized intersections based on a risk probability methodology. This study applied a risk probability of a potential rear-end collision between a left-turn vehicle and the immediately following through vehicle. With the shifted negative exponential model and the compound probability theorem, the risk probability can be expressed as the function of directional volumes, opposing volumes and the percentage of left-turns for a two-lane and four-land highway, respectively. The warrants of installing left-turn lanes on unsignalized intersections were developed with the risk probability. The warrants define the total approaching and opposing volumes to encourage a left-turn lane as a function of operating speed, percentage of left-turn, and number of lanes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.797-803
• /
• 2019

This study was carried out to reduce the lateral vibration of high-speed electric multiple units. In the study, the high-speed electric multiple unit prototype (HEMU-430X) has a high lateral vibration at low equivalent conicity regardless of the wheel profiles (XP55, GV40, S1002). As wheel wear progresses and the equivalent conicity increases, the lateral vibration tends to decrease. The reason is that a combination of the suspension characteristics causes the body and bogie to resonate at a frequency of 1.4 Hz when the equivalent conicity is low, resulting in body hunting. An investigation of the lateral vibration of overseas high-speed trains showed that a decrease in the hydraulic stiffness of the yaw damper could improve the vibration. The series stiffness of the yaw damper is a combination of the hydraulic stiffness and elastic joint. In this study, an attempt was made to improve the lateral vibration by lowering the stiffness of the elastic joint. The series stiffness of the adjusted yaw damper was approximately 60% compared to the original one. The on track test results showed improvement in the lateral vibration for both running directions. The vibration reduction method of this study can be used for EMU-250 and EMU-320 in future commercial operations.