• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.570-574
• /
• 2009

벽 근처에서의 흐름(near wall flow)을 해석하기 위한 낮은 레이놀즈수 수정(low-Reynolds number modification)을 포함하는 통계학적 난류모형을 이용한 3차원 비정상 레이놀즈-평균 나비어-스톡스 (URANS) 계산을 실시하여 사각형 수로에서의 중력류를 모의하였다. 3차원 계산 결과를 2차원 URANS 모의에 의한 계산 결과 그리고 실험결과와 비교하였다. 이 연구 결과는 적정 시 공간적 수치해상도를 가지고 벽 근처에서의 흐름을 주의 깊게 직접 해석하는 3차원 URANS 수치모의는 2차원 계산으로는 해석할 수 없는 대규모 Kelvin-Helmholtz 와구조 (vortical structure)의 붕괴(breakdown) 그리고 중력류 선단부에서 발달하는 Lobe-and-Cleft 흐름 불안정 등을 포함하는 중력류의 동적 특성을 높은 정확도로 재현할 수 있음을 보여준다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.3
• /
• pp.5-16
• /
• 2019

With the recent concentration of urban populations, the constructions of large structures are increasing, along with the development of foundations for large structures. PHC Piles have been used in many structures ever since Japanese introduced the technology at the end of the 20th century. Recently, many studies on the use of the PHC Pile have been carried out as earth retaining using the merits of PHC piles. In this study, static axial compression tests were conducted on the PHC-W piles constructed as column-type in building underground additional wall using the PHC-W earth retaining wall. The end bearing capacity of pile was calculated using the axial load transfer measurement that was obtained from the static axial compression test result. Since end bearing capacity of the PHC-W pile embedded in weathered rock showed a different behaviour from the conventional PHC pile, the calculation method of end bearing capacity for column-type PHC-W piles would be proposed. The unit ultimate end bearing equation proposed for single and group PHC-W pile embedded in weathered rock is $q_b=13.3N_b$ and $q_b=6.8N_b$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1290-1298
• /
• 2003

The stirred tank reactor is one of the most commonly used devices in industry for achieving mixing and reaction. Here we report on results obtained from the large eddy simulations of flow inside the tank performed using a spectral multi-domain technique. The computations were driven by specifying the impeller-induced flow at the blade tip radius. Stereoscopic PlY measurements (Hill et al. $^{(1)}$) along with the theoretical model of the impeller-induced flow (Yoon et al. $^{(2)}$) were used in defining the impeller-induced flow as superposition of circumferential, jet and tip vortex pair components. Large eddy simulation of flow in a stirred tank was carried out for the three different Reynolds numbers of 4000, 16000 and 64000. The effect of different Reynolds numbers is well observed in both instantaneous and time averaged flow fields. The instantaneous and mean vortex structures are identified by plotting an isosurfaces of swirling strength for all Reynolds numbers. The Reynolds number dependency of the non-dimensional eddy viscosity, resolved scale and subgrid scale dissipations is clearly shown in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.61-69
• /
• 1997

A simple and relatively new experimental method is proposed to estimate the plane stress fracture toughness by using compact tension (CT) specimen. The anti-buckling plates (fabricated to prevent the buckling caused by the 45 plastic yielding around crack tip under the plane stress condition) help to determine the relatively accurate plane stress fracture toughness of two stainless steels (SS304 and SS316). The fatigue crack propagation behavior of two stainless steels under two different loading conditions such as 10Hz and 5Hz frequency fatigue loadings was investigated by using image analysis technique (IAT) which renders several technical advantages over various conventional measuring methods. It was found that the IAT could be used to estimate fatigue crack lengths more effectively. Furthermore, it was suggested that we might control the measuring time interval for fatigue crack propagation by nearly automatically controlled technical process with the help of IAT.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.72-78
• /
• 2001

In this study, high spatial resolution of IKONOS 1m image and Red(0.63~0.69) band, NIR(0.76~0.90) band in 4m image, which are the same wavelength range as Landsat TM band 3, 4, were used for extraction of the front areas of B. Xylophilus in Geuje island where is located in southern part of Korea. Moreover, since they have higher spatial resolutions than Landsat TM, they have been used for lots of studies in the field of forest and vegetation. In the results, it was validated by GPS field survey, spectral histogram analysis of IKONOS NIR band was significant available method for extracting the front areas of B. Xylophilus. In this study, 15 points were verified as real damaged trees of 22 sample points extracted from GPS field survey. This study was not only extracted the damaged trees by B. Xylophilus but also suggested the possibility of using IKONOS images for the study on the forest damages by any disease and insect pests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.103-110
• /
• 1987

When a crack in the plate with a circular hole approaches to the hole, the large stress concentration phenomenon appears at the boundary of the circular hole and the crack tip. As a numerical analysis method for the stress concentration in a structure, the Finite Element Method has been used. In this paper, however, the Boundary Element Method is employed, which may reduce the numbers of input data and the calculating time when compared with the Finite Element Method. A finite flat plate having a crack between the two circular holes is chosen as a model in this study. The results by the Boundary Element Method are compared with those of the Boundary collocation Method by Newman, which are already well established. And the structural behavior near the circular hole and at the crack tip is also investigated.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.59-66
• /
• 2004

In this study, the behavior characteristics of vertical and batter piles were analyzed by the model tests and the numerical analyses. Model steel pipe piles with the inclination of 0$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$ and 30$^{\circ}$ were driven into sands with the relative density of 79%. The static compression load tests and numerical analyses using PENTAGON 3D were performed. The bearing capacities of batter piles with inclination of 10$^{\circ}$, 20$^{\circ}$ and 30$^{\circ}$ were 111, 95, and 81% of those of vertical pile in model tests, and the results of numerical analyses were similar to those of model tests. The bearing capacities p.oposed by Petrasovits and Award (1968) were similar to those of model test in the inclination of 10$^{\circ}$, but overestimated in the inclination of 20$^{\circ}$ and 30$^{\circ}$. The skin frictions and end bearing loads were the maximum in the inclination of 10$^{\circ}$ and decreased with increasing the inclination angle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.324-324
• /
• 2023

수제는 비용 대비 높은 효율을 가지는 수공 구조물로 하천과 해안에 많이 이용된다. 수제는 하천에서 식생물의 서식처, 유량 확보, 하천시설 보호 등의 목적으로 설치되며 해안에서는 해안선보호, 수심 확보 등의 다양한 목적으로 설치된다. 수제는 일반적으로 넓은 영역을 제어할 수 있도록 여러개의 군수제 형태로 설치한다. 수제설치 시 기존 하도나 수로의 흐름에 교란이 일어나는데 본류부에서는 하폭이 좁아져 수제선단부에 의한 영향으로 높은 유속이 발생되며 수제역내에서는 재순환흐름과 함께 다양한 형태의 유속분포가 형성된다. 이러한 수제에 의한 흐름은 수제 선단부의 영향으로 발생하는 흐름분리선(Separation Layer)을 기준으로 흐름중심선(Talweg Line)과 흐름분리영역(Separation area)을 만들어내며 수제역내의 재순환영역에서 완화된 유속은 제방을 침식으로부터 보호하며 식생물의 서식처를 제공한다. 기존의 연구는 대부분 단일수제에 대한 연구가 수행되었으며 연속된 군수제에 대한 연구는 다소 제한된 조건에서 수행되었다. 이에 본 연구에서는 연속된 수제가 설치된 경우 수리실험을 통해 수제주변의 흐름 변화 특성을 분석하였다. 수리실험은 30.0m(L')×1.52m(B')×1.10m(H')의 직선 개수로에 050m(l)×0.10m(b)×0.25m(h)의 수제를 수로측면을 따라 연속적으로 배열하여 설치하였다. 실험은 수심, 유량, 수제설치간격을 변화시키면서 수행했으며 마그네틱유속계를 사용해서 수제의 영향을 받지 않으며 벽면의 영향이 가장 적은 수로상류의 중앙지점에서 접근유속을 측정했다. 표면유속을 취득하기 위해 일반디지털카메라로 FHD(1920×1080) 해상도를 가진 영상을 각각의 조건마다 10~20분 촬영했다. 촬영된 영상을 연속된 정지영상으로 변환하고 영상해석 프로그램을 이용하여 표면유속을 도출했다. 표면영상유속계를 활용하여 도출한 결과로 각각 조건에 따라 발생하는 최대유속과 최대역방향유속, 와도(vorticity), 흐름중심선과 단면유속분포의 변화와 발생 위치를 분석했다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.117-129
• /
• 2000

This paper discusses the lateral behavior of group pile in homogeneous and non- homogeneous (two layered) soil. In the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, constraint condition of pile tip, eccentric load and ground condition. The group efficiency and lateral deflection induced in active piles were found to be highly dependent on the spacing-to-diameter ratio of pile, number of pile. Lateral bearing capacities in the group piles of fixed tip, in the case of 6D spacing and $3\times3$ array, were 40-100% higher than those in the group pile of free tip. Based on the results obtained, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8% and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. However, in the case of dense sand, it can be estimated that a spacing-to-diameter of 8.0 seems to be large enough to eliminate the group effect. In this study the group efficiency is illustrated in experimental function with spacing-to-diameter, S/D, relative density and number of pile. The distribution of shear force in lead row piles, in the case of 3$\times$3 array group pile, was 41.6-52.4% for 3D spacing and 34-40% for 6D spacing, respectively. The shadowing effect for the parallel direction of lateral loading appears to be more significant than the one for the perpendicular direction of lateral loading.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.187-199
• /
• 2016

In order to delineate the soft ground distribution, an integrated geostatistical analysis was performed using the MASW (Multichannel Analysis of Surface Wave) which has the information of overall region and CPTu (Piezo Cone Penetration Test) which provides the direct information of the measuring point of the ground. MASW results were known to have close relationship with the ground stiffness. This correlation was confirmed through the comparison of MASW data obtained from two survey lines to the laboratory test with extracted soil samples. 3D physical property distribution in the study area was acquired by geostatistical integrated analysis with the data of tip resistance ($q_c$) and pore pressure (u) from the CPTu obtained at 6 points within the study area. The integrated analysis was conducted by applying the COSGSIM (Sequential Gaussian Co-Simulation) technology which can carry out the simulation in accordance with the spatial correlation between the MASW results and both tip resistance and pore pressure. Besides the locations of CPTu, borehole investigations were also conducted at two different positions. As a result, the N value of SPT and borehole log could be secured, so these data were used for the analysis of the geotechnical engineering accuracy of the integrated analysis result. For the verification of reliability of the 3D distribution of tip resistance and pore pressure secured through integrated analysis, the geotechnical information gained from the two drilling areas was compared, and the result showed extremely high correlation.