• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.598-603
• /
• 2008

In petrochemical complex, Hydrogen Network optimization is surveying the extra Hydrogen and needed Hydrogen of each company and calculating the optimized distribution. This paper compares the case of using the existing pipeline and the case of not using the existing pipeline to show the effect quantitatively and clearly by modeling the both cases and using mathematical programming. As a result, using the existing pipeline can save the pipe cost over 20% and increase the whole network benefit by thirteen billion won.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.253-258
• /
• 2020

Petrochemical industry complex in Korea always has high riskiness due to explosive and inflammable gases. To prevent these explosion, most facility of petrochemical industry complex requires the performance of explosive proof. The control panel, which is used as explosive proof, has been used the air injection method by manually from outside to constantly keep the temperature and pressure between inside and outside of the panel. In this paper, we propose the automatic temperature controller, which performs automatic heating and cooling according to temperature inside the panel in order to control temperature automatically.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.295-300
• /
• 2021

This study investigated the dominant frequency of the elastic waves from the tensile test. The specimen was rolled with five different rolling degrees (10, 22, 33, 42 and 50%), which was treated subzero. The specimen was rolled at room temperature, which was transformed from austenite to martensite (only α'-martensite). The dominant frequency increased with an increase in the rolling degree regardless of the subzero temperature, and decreased after 33% of the rolling degree. On the other hand, higher frequency band was obtained at lower temperature and long time. The dominant frequency increased when the amount of α'-martensite increased and decreased with the α'-martensite amount between 50-65%. The lower subzero treatment temperature increased the amount of α'-martensite, which resulted in the higher dominant frequency. The longer treatment time at the same subzero temperature led to an increase in the amount of α'-martensite, leading to high dominant frequency.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.261-269
• /
• 2021

This study was evaluated the elastic wave properties according to tension of Incoloy 825 alloy with different solution treatment temperature and aging time. Solution treatment was carried out at 700, 800, 900, and 1000 ℃ for 1 hour, and aging was carried out at 700 ℃ for 1, 5, 10, and 30 hours. As the solution treatment temperature increased, the tensile strength decreased and the elongation increased. However, as the aging time increased, the tensile strength increased and the elongation decreased. The dominant frequency decreased as the solution treatment temperature increased, but increased as the aging time increased. The dominant frequency according to the solution treatment and aging time increased as the tensile strength increased, but increased despite the decrease in elongation.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2023

This study was investigated the effect of carbon on the micro-structure and hardness of ductile cast iron roll with internal curing capacity. Spheroidal graphite existed at roll body with rapid cooling, but granular graphite existed at roll neck with slow cooling. The volume fraction of graphite increased at roll body with rapid cooling, That of roll neck with slow cooling decreased, but graphite size increased. The volume fraction of cementite decreased, but volume fraction increased. The cementite size was larger at roll neck than roll body. The hardness was decreased at roll body and roll neck due to volume fraction of cementite. The hardness of roll body was higher than roll neck.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.571-576
• /
• 2023

In this study, the harmless crack size(a_hml) according to the residual stress depth was evaluated using the fatigue limit of SCM440 steel by quenching-tempering(QT) and induction hardening(IH), and threshold stress intensity factor of QT steel. Because the residual stress increased rapidly as the crack depth increased, a_hml was determined at the depth of all the crack aspect ratio(As) regardless of Type I-III, and a_hml also increased according to the residual stress depth. a_hml was minimal at As=1.0 and maximal at As=0.1, but was almost similar on each Type. a_hml was small the dependence on As.

• Journal of the Economic Geographical Society of Korea
• /
• v.20 no.1
• /
• pp.1-15
• /
• 2017

This paper analyzes empirically how the three main industries (petrochemical industry, shipbuilding industry, automobile industry) that are driving the growth of Ulsan region in 2005~2013 have grown by what factors. For this purpose, we investigate the structural changes of the three main industries by using regional input-output tables announced by the Bank of Korea and examine the growth contribution rate of each industry that is divided into domestic final demand, export demand, import substitution for final goods, import substitution for intermediate goods and technological change, respectively. The growth rate of gross output and aggregate demand in petrochemical and automobile industries increased in 2010-1013 compared to 2005-2010, but the growth rate of gross output and aggregate demand in shipbuilding industry slowed down. As a result of analysis of factors contributing to the increase in gross output of the three main industries, export demand has the greatest effect. By industry, the rate of growth contribution of export demand in petrochemical industry is recorded as 209.23% in 2005-2010 and 113.78% in 2010-2013, respectively. The rate of growth contribution of export demand in automobile industry is recorded as 258.72% in 2005-2010 and 72.69% in 2010-2013, respectively. On the other hand, the rate of growth contribution of export demand in shipbuilding industry is recorded as 94.47% in 2005-2010, but it decreased to -255.32% in 2010-2013. Analysis of growth factors of Ulsan's three main industries is expected to serve as the basis for reorganizing related industrial policies and establishing them.

• Nuclear industry
• /
• v.17 no.11 s.177
• /
• pp.36-38
• /
• 1997

국내 원자력산업계는 11월 11일, 외무부 $\cdot$ 통상산업부 $\cdot$ 환경부 $\cdot$ 과학기술처 등 관계 장관에게 제출한 의견서에서 우리 나라 발전은 현재 전력 수요의 $36\%$를 충당함으로써 석유 화력 발전 대비 연간 1천5백만톤 이상의 이산화탄소($CO_2$) 감축 효과를 거두어 경제 발전과 환경 보전에 크게 공헌하고 있다고 지적, '정부 당국은 이 기회에 원자력 발전을 온난화 방지에너지 대책 사업의일환으로 확고히 자리매김해 줄 것'을 건의했다. 사단법인 한국원자력산업회의 산하 86개 회원사 일동의 이름으로 제출한 이 의견서는 또한 '정부 당국은 현행 원자력 개발 이용 계획에 대한 강력한 의지와 장래의 비전을 대내외적으로 다시 한번 재천명하고 이의 효과적인 추진을 위한 정책적인 조치를 강구해 줄 것'도 아울러 촉구했다. 원자력산업계는 의견서 가운데에서 원자력 발전은 현재 세계 전체 발전량의 17%를 공급, $CO_2$ 배출량을 연간 23억톤 이상 삭감하고 있으며, 이러한 수치는 세계 $CO_2$ 배출량의 약 $10\%$에 상당한다고 지적했다. 의견서 전문은 다음과 같다.

• KDI Journal of Economic Policy
• /
• v.11 no.1
• /
• pp.3-30
• /
• 1989

본(本) 연구(硏究)에서는 원화(貨)의 평가절상(平價切上)이 산업별(産業別) 생산(生産), 가격(價格), 고용(雇傭), 무역(貿易) 등에 미치는 영향을 한국경제(韓國經濟)의 일반균형모형(一般均衡模型)을 통하여 분석하였다. 분석결과에 의하면 평가절상(平價切上)의 효과(效果)는 산업(産業)의 수요(需要), 공결탄성치(供結彈性値), 수출비율(輸出比率), 수입품과의 대체성(代替性), 부가가치비율(附加價値比率) 등 산업(産業)이 갖는 특성에 따라서 매우 상이(相異)하게 나타남을 알 수 있었다. 혁제품, 고무제품, 섬유 직물, 조선, 의복 등의 산업에서 생산감소효과(生産減少效果)가 큰 것으로 나타나고 있으며 석유제품, 철1차제품, 비철금속1차제품, 화학제품 등의 산업에서 가격하락효과(價格下落效果)가 큰 것으로 밝혀졌다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.317-321
• /
• 2006

Construction companies do not take necessary steps for sudden change in the Construction market, In order to over come the problem, it is necessary to make Corporate Strategy through correct Market analysis. If construction companies want to secure continuance profits, they must prepare proper strategy to advance into plant market. This research performs both external and internal environment analysis, External environment analysis is for overseas construction market and advanced foreign companies, and internal environment analysis is the current status of domestic companies. The research identifies some of the Key points, growth in foreign plant market is huge, but domestic companies do not have abundant construction experience on the same field and also they lack in high value-added techniques. They are far behind the advanced companies; they don't have proper skills of Procurement, engineering and project management. This study suggests a strategy for domestic companies to take necessary step to advance into plant construction market.