• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.813-816
• /
• 2018

X-ray 진단에서 그리드 하드웨어의 사용은 산란선에 의한 영상의 왜곡을 보정할 수 있는 장점이 있는 반면, 반복되는 라인 형태의 그리드 아티팩트를 발생시키는 부작용을 수반한다. 본 논문에서는 이러한 그리드 라인을 제거하는 방법론으로서 이산코사인변환(DCT: discrete cosine transform)을 사용 하는 기법을 제안한다. X-ray 영상에서 그리드 라인의 특성은 피사체의 형태와 영상의 영역에 따라 서로 다른 특성을 갖는다. 이에 본 연구에서는 동적으로 재구성되는 분할 구조를 기반으로 DCT 변환을 적용하고 개별 영역별로 필터전달함수를 최적화하는 방법을 채택하였다. 추출된 주파수 영역 데이터에 대하여 그리드 라인의 대역을 검출하는 알고리즘을 제안하였으며, 필터전달함수로 Kaiser윈도우와 Butterworth 필터를 조합한 형태의 밴드스톱필러(BSF: band stop filter)를 구현하였다. 또한 블로킹 현상을 개선하기 위하여 다중 영상으로부터 경계선 부분의 픽셀값을 결정하는 방법론을 제안하였다. 제안된 이론에 대하여 실제 영상을 사용한 실험결과로부터 그 타당성을 평가하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.23-32
• /
• 2012

The present study is aimed to develop an integrated performance analysis approach for the application of a compressor with variable inlet guide vane (VIGV) and vairable stator vane (VSV) in a small turbofan engine. For the integrated analysis approach, an engine performance analysis program, NPSS and a computer program used for predicting of axial flow compressor performance based on stage stacking method, STGSTK were linked with an optimisation package, Isight. This enables off-design performance analysis for the turbofan engine with VIGV and VSV hence provides the capability to predict stable operation condition of the engine with acceptable surge margin.

• Annual Conference of KIPS
• /
• 2022.05a
• /
• pp.78-80
• /
• 2022

최근 딥러닝을 이용한 영상 분석은 자율주행, 감시카메라 등 다양한 서비스에 필수적으로 활용되고 있으며 실시간 처리 및 보안 요소를 만족하기 위해 기존의 클라우드 컴퓨팅 방식의 단점을 개선한 클라우드 엣지 컴퓨팅 방식을 적용하는 사례가 크게 증가하고 있다. 하지만 사용자 및 단말과 가까운 위치에서 딥러닝 추론을 진행하는 클라우드 엣지 서버는 클라우드 서버와 비교하여 컴퓨팅 자원이 충분하지 않을 경우가 많으며 기존의 딥러닝 모델을 그대로 클라우드 엣지 환경에 적용하는 것은 자원 활용 측면에서 여러가지 문제점들을 갖고 있다. 따라서 본 논문에서는 마이크로서비스 구조를 통해 자원을 보다 유연하게 활용할 수 있도록 개선된 딥러닝 모델로 대규모의 클라이언트 요청을 처리 가능한 동영상 데이터 추론 서비스인 G-Edge AI 추론 서비스 개발에 대해 설명한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1041-1048
• /
• 2023

Wind LiDAR and Wind Profiler are devices that produce continuous vertical distribution of wind vector in high-resolution data, and their use has recently been increasing. Although the observation and data processing methods of the two devices are similar, differences in wind detection accuracy may occur depending on weather and operation settings. introduce the characteristics of the two instruments and wind calculation methods, and apply the latest instrument verification standards to evaluate their accuracy by comparing them with the wind observed with a radiosonde. Accordingly, a new direction for performance verification following the introduction of equipment and additional necessary complements are presented.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.243-262
• /
• 2018

Database schema integration is a significant issue in information systems. Because schema integration is a time-consuming and labor-intensive task, many studies have attempted to automate it. Researchers typically use XML as the source schema and leave much of the work to be done through DBA intervention, e.g., there are various naming conflicts related to relationship names in schema integration. In the past, the DBA had to intervene to resolve the naming-conflict name. In this paper, we introduce an algorithm that automatically generates relationship names to resolve relationship name conflicts that occur during schema integration. This algorithm is based on an Internet collocation and English sentence example dictionary. The relationship between the two entities is generated by analyzing examples extracted based on dictionary data through natural language processing. By building a semi-automated schema integration system and testing this algorithm, we found that it showed about 90% accuracy. Using this algorithm, we can resolve the problems related to naming conflicts that occur at schema integration automatically without DBA intervention.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.549-556
• /
• 2006

In this paper, we propose a system for generating skeleton programs for directly transforming an XML document to another document, whose structure is defined in the target DTD with GUI environment. With the generated code, the users can easily update or insert their own codes into the program so that they can convert the document as the way that they want and can be connected with other classes or library files. Since most of the currently available code generation systems or methods for transforming XML documents use XSLT or XQuery, it is very difficult or impossible for users to manipulate the source code for further updates or refinements. As the generated code in this paper reveals the code along the XPaths of the target DTD, the result code is quite readable. The code generating procedure is simple; once the user maps the related elements represented as trees in the GUI interface, the source document is transformed into the target document and its corresponding Java source program is generated, where DTD is given or extracted from XML documents automatically by parsing it. The mapping is classified 1:1, 1:N, and N:1, according to the structure and semantics of elements of the DTD. The functions for changing the structure of elements designated by the user are amalgamated into the metadata interface. A real world example of transforming articles written in XML file into a bibliographical XML document is shown with the transformed result and its code.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.262-269
• /
• 2019

References at the end of an academic paper are information that helps authors keep their research ethics, readers refer to related prior studies. Also references are useful information for linking citations and citations between articles. As bibliography metrics develops, bibliographic data is used as an important data for assessing the academic influence of countries, institutions and individual researchers. However, it is not easy to identify and link the reference data due to the diversity of the bibliographic citation formats, the loss of information due to the abbreviation of journal names and author names, and typos by authors. This study investigated the method of improving the bibliographic data mapping rate by analyzing the unmapped cases. As a result, it was found that the main cause of the article-reference mapping failure was the similarity of abbreviated journal names. Research team suggested that continuous management of journal title authority data and improving the DOI registration rate as ways to improve the identification and mapping rate. This study is differentiated from other studies in used database. Bibliography mapping was attempted for domestic and foreign integrated journal database that is mainly subscribed, used, published and cited in Korea. Through reference construction volume and mapping rate improvement, it can be used as citation analysis and service database reflecting domestic situation that is different from overseas citation index database.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.684-693
• /
• 2021

Purpose: The purpose is to establish a safe facility environment from abnormal voltages such as lightning by developing a smart land resistance measuring device that can acquire real-time land resistance data using Arduino. Method: This paper studied design models and application cases by developing a land resistance acquisition and analysis system with Arduino and a power line communication (PLC) system. Some sites in the wind power generation complex in Gyeongsangnam-do were selected as test beds, and real-time land resistance data applied with new technologies were obtained. The electrode arrangement adopted a smart electrode arrangement using a combination of a Wenner four electrode arrangement and a Schlumberger electrode arrangement. Result: First, the characteristic of this technology is that the depth of smart multi-electrodes is organized differently to reduce the error range of the acquired data even in the stratigraphic structure with specificity between floors. Second, IT convergence technology was applied to enable real-time transmission and reception of information on land resistance data acquired from smart ground electrodes through the Internet of Things. Finally, it is possible to establish a regular management system and analyze big data accumulated in the server to check the trend of changes in various elements, and to model the optimal ground algorithm and ground system design for the IT convergence environment. Conclusion: This technology will reduce surge damage caused by lightning on urban infrastructure underlying the 4th industrial era and design an optimized ground system model to protect the safety and life of users. It is also expected to secure intellectual property rights of pure domestic technology to create jobs and revitalize our industry, which has been stagnant as a pandemic in the post-COVID-19 era.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.1
• /
• pp.25-44
• /
• 2023

This study was to prepare a development plan for nationwide authority control system based on national authority sharing system of NLK through the survey targeting on libraries which do not participate in the system. Six plans were suggested to establish a nationwide authority control system based on this survey. First, an authority data construction module and a module linked to the national authority sharing system should be developed. Second, describing external identifiers such as ISNI to the national authority sharing system is to provides reliability of data and to utilizes to build linked data. Third, it is necessary to prepare strategies for promoting the national authority sharing system and diversifying services. Fourth, both authority establishment and non-establishment show difficulties and diversity in the selection and description of authorized access point, so it is necessary to prepare rules related to authorized access points. Fifth, since the data described in authority records is not enough, it is necessary to improve and upgrade authority records by using bibliographic records. Sixth, it is necessary to educate librarians about the necessity and function of authority control. As such, this study is meaningful in that it investigated the current status and requirements of libraries that do not participate in the nationwide authority system and sought ways to establish a nationwide cooperative authority control system.

• Journal of the Korean Society for information Management
• /
• v.31 no.1
• /
• pp.299-317
• /
• 2014

The objective of this study is to analyse the college students' Internet information activities and life satisfaction with their personality types. For this study, data were collected using self-designed questionnaire which included the items of college students' demographic information, MBTI personality types, and their information activities of the Internet. Total of 480 data were collected and 102 valid data were analysed with the multiple regression using SPSS version 18.0. It was found that extraversion, sensing, thinking, and feeling types of college students were tend to show the higher of their life satisfaction through the online game; introversion, sensing, intuition, thinking, and feeling types of college students were tend to show the lower of their life satisfaction through the internet retrieval; and extraversion, intuition, and feeling types of college students were tend to show the lower of their life satisfaction through the smart-phone messenger use.