• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.292-298
• /
• 2008

Seoul Metro and Seoul Metropolitan Rapid Transit Corp. have started installing screen doors at subway platforms to improve the environment of subways and prevent passengers' accidents since 2006. They are still installing screen doors at subway platforms and Metropolitan Rapid Transit Corporations in other areas are also proceeding with installment of screen doors or making preparations for it. Grounding is necessary for installing PSD systems. In case that PSD grounding is connected with existing electrical equipment grounding system, it was decided to install separate grounding for safe operation of PSD system and passenger safety. However, it's very difficult to install new grounding at the subway station compound. A way to improve this condition is that we proceed with grounding by composing grounding station by carbon grounding rod. This paper will mainly deal with how to design and construct carbon ground rod, which has been applied to PSD system grounding since 2006, including its experimental examples. In this paper, ways to secure ground resistance below 5 ohms, which is resistance necessary for PSD grounding, and to compose grounding system were also discussed. Furthermore, a ground test to check the ability to fulfill a role of PSD grounding system was conducted. As a result of applying carbon grounding module, PSD system is being operated without any problem and the installment of PSD system will be continuously expanded in the future. It's also thought that a way to integrate grounding of each functional room which has been installed at the subway station compound and to arrange equipotential grounding should be reviewed and performed promptly.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.326-333
• /
• 2008

This study is objected by presenting preliminary data to revise the periodic replacement criteria of continuous welded rail (CWR) in using. In this study, it is investigated information resources for foreign standards, the cause and types of damage in welded rails and the track maintenance history of Seoul metro to analysis the correlation between rail failure and accumulated passing tonnage. Also, it is performed bending test for the laid welded rail reaching the periodic replacement criteria. In result, the correlation between rail failure and accumulated passing tonnage is not obvious and it is a lot of cases for the construction error of welded rail. Also, as a result of bending test of laid welded rail, according to reducing about $17{\sim}18%$ the bending fracture strength of rail, the laid welded rail reaching the periodic replacement criteria is well enough ensured for the load carrying capacity of rail.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.946-958
• /
• 2009

Lately, Seoul metro is changing transformation facilities which have been operated in subway line 1 and 2 for a long duration of time. Although the exiting protection relays in DC feeder system have such several functions as 76I, 50, 85, and 64P, the new protective relay have a great variety of functions such as 76I, 76D, DDL-I, DDL-T(Imin), 85, and 64P, as well as record and save various events and accident wave in order to review and analyze the working causes of the protective system. However, because the new digital relays are not used properly for protective propose, there are the cases that the electric accident is deteriorated more. Therefore, in this paper, we will describe that making the use studying installation intention, direction, and setting up value of the protection relay in DC breaker operation not only prevents from making the electric accident worse but also shows the efficient operation method of direct current protection system.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.199-204
• /
• 2012

This study examines the mediating effect of Organizational Citizenship Behavior in the relationship between Job Insecurity and self-reported Job Performance. 207 employees from 4 Railroad Organizations (Korail, Seoul Metro, Incheon Metro, Metro 9) are selected as the main target of this study. Based on advanced researches, hypothesizes are developed and according to received questionnaires, SPSS 18.0 is used for testing empirically. Result shows that with Mediating variable OCB, Job Insecurity is negatively associated with self-reported Job Performance. And because OCB is complete mediating in the relationship between Job Insecurity and self-reported Job Performance, actually, OCB is shown to play a very important role in Job Insecurity.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1933-1942
• /
• 2008

Over the years, the Social Republic of Vietnam has demonstrated its high annual growth rate over 8%. In order to secure its sustainable economic growth, its has also demonstrated its sharp concerns on building up core infrastructures by luring foreign investments on a large scale, which would underpin the nation's economic propulsion. Among others, transport infrastructures and networks centering on railway systems are obviously seen as the most urgent to be built to continue its growth. Seoul Metro recently took a significant step forward in Vietnam to launch railway business by executing its export project of 6 units of metro cars to Hanoi as on July 10, 2008. Those 6 cars are scheduled to be put on the tracks linking Yen Bian, Hanoi with Ha Long, for demonstrative running, around October, 2008, carrying tourists on that 163kms of the National Railway line serving the region. A successful running on the track will duly entail further export of additional 54 units of Seoul Metro cars to Vietnam. In this thesis, description will be noted on the reuse and economic value of the Seoul Metro's de-commissioned metro cars, reflecting on the current urban railway law at home regulating the service life of rolling stocks domestically. This thesis will also study the points at issue, and the recommendable future orientation of the Vietnam railway business project.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.4 s.56
• /
• pp.116-125
• /
• 2009

Recently, modular system are popular in construction fields, and they are increasing their marcket share. To compare modular units, bolting and welding are most popular methods. However, the temperature around a welded part might be over than 1,300$^{\circ}C and the composite member might be exposed tp the direct welding heat about 20,000$^{\circ}C. This high welding heat makes decrease of the concrete strength. If the concrete strength seriously decreases, it can affect the behavior and safty of a structure. On this study, To prevent of concrete strength decreases by welding heat, we suggested method of to insert between steel and concrete.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2895-2901
• /
• 2011

SeoulMetro(line number 1 to 4) for the first half of the year. Therefore air quality in the subway is very important. It is passengers, such as sneezing and respiratory vital activities, Suspended due to skin keratin microbial action, and Microbial contaminants such as viruses. Hypersensitivity disorders, an atopic dermatitis, infectious diseases, allergic diseases, and can cause respiratory diseases. Ministry of Environment and National Institute of Environmental Research is managed so the life bacteria. It is emerging as the occupational health problems. Introduction of an appropriate ventilation system for cooling and dehumidification is needed. In line number 2, commuting and normal trains are measured in-room floating microbes. Suspended bacteria and fungi suspended in 2011 for 85 ~ 385$cfu/m^3$, 67 ~ 98$cfu/m^3$ is lower than baseline. Suspended to prevent microbial contamination and air conditioning equipment performance is a substantial improvement. Suspended micro-organisms and the impact on passenger room ventilation is increased. Electric car how to improve air quality substantially investigated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.148-160
• /
• 2012

This study proposed more reasonable prediction models on compressive strength and carbonation of concrete structure and developed a more effective tunnel safety diagnosis and maintenance method through field application of the proposed prediction models. For this study, the Seoul Metro's Line 1 through Line 4 were selected as target structures because they were built more than 30 years ago and have accumulated numerous diagnosis and maintenance data for about 15 years. As a result of the analysis of compressive strength and carbonation, we were able to draw prediction models with accuracy of more than 80% and confirmed the prediction model's reliability by comparing it with the existing models. We've also confirmed field suitability of the prediction models by applying field, the average error of an estimate on compressive strength and carbonation depth was about 20%, which showed an accuracy of more than 80%. We developed a more effective maintenance method using durability prediction Map before field inspection. With the durability prediction Map, diagnostic engineers and structure managers can easily detect the vulnerable points, which might have failed to reach the standard of designed strength or have a high probability of corrosion due to carbonation, therefore, it is expected to make it possible for them to diagnose and maintain tunnels more effectively and efficiently.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.582-589
• /
• 2009

The energy generated by braking vehicle would simply be converted into waste heat by its braking resistors if no other vehicle is accelerating at exactly the same time. Up to 45% of the tractive power of vehicles capable of returning energy to the power supply can be regenerated during braking and that this energy can be used to feed vehicles which are accelerating at the same time. Such synchronized braking and accelerating can not be coordinated, the ESS(energy storage system, here after) stores the energy generated during braking and discharges it again when a vehicle accelerates. The ESS is able to store and discharge energy extremely quickly, consequently enabling a complete exchange of energy between vehicles, even if they are not braking and accelerating at precisely the same time, as is most frequently the case in everyday service. The energy saving rate is related to the headway. If the headway is long/short, the energy saving goes up/down, When the headway is short, the ESS can not save much regenerative energy. The headway of SeoulMetro line 2 as the worst case is very short in Korea urban transit system. So, the energy saving rate will be very low. If the ESSs are applied to another railway system, we can expect that the effectiveness is better than the results of SeoulMetro line 2. This paper presents effects of energy saving obtained by applying the ESS to SeoulMetro line 2.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.100-111
• /
• 2019

The existing selected station analysis (SSA) method analyzes the link transfer mode data between origin and destination of individuals passing through stations from a microscopic standpoint. As such, existing SSA is insufficient as it uses integrated analysis using macroscopic data such as subway lines. This research builds a line chain OD based on path search of individual passenger's movement through the subway, and explores means to utilize the findings. First, a method is proposed that searches the traversed subway path from the linked passage modes that the passenger uses and applies the results to SSA line analysis. Compared to the existing SSA, this method provides for analysis of commonly conflicting features such as the line on which the station is passed, and the stations included on the line thanks to the presence of complete information of the individual passenger's traversed path. It also allows for integrated observation of the line chain OD that approaches a certain station. For enhanced understanding, Seoul Metro Line 9 is used as a case study to demonstrate the integrated formulation concept of line chain OD centered around a certain station as well as the macroscopic features of the traversed path that approaches stations included on the line.