• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.133-133
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.131-131
• /
• 2014

양자점은 전통적인 유기 염료에 비해 흡광영역이 넓고 발광 피크의 폭이 좁으며, 흡광과 발광 사이의 에너지 차가 커서 검출이 용이하고, 광안정성이 우수할 뿐만 아니라, 단순히 크기를 조절함으로써 발광 피크의 에너지를 제어할 수 있는 특장 때문에 많은 연구가 진행되었다. 그러나 많은 나노입자들과 마찬가지로 실질적인 응용을 위해서는 양자점 나노입자들도 대부분 표면개질을 거쳐야 하는데, 이 과정이 까다롭고 또 표면개질 중에 나노입자들의 응집이 일어나거나 광특성이 나빠지는 등의 문제가 흔히 발생한다. 한편, 서브미크론 크기의 입자들은 나노입자에 비해 응집현상이 미미해서 상대적으로 취급이 용이하다. 그 중에서도 실리카 입자들은 합성방법도 쉽게 확립되어 있고 생체친화성이 우수하며 그 표면화학 반응이 이미 잘 알려져 있어서 활용하기가 매우 용이하다. 따라서 양자점 층을 실리카 표면 가까이에 자기조립을 통해 배열한 하이브리드 구조는 양자점의 장점을 편리하게 이용할 뿐만 아니라 실리카의 표면개질 특성도 그대로 이용할 수 있다는 이중의 장점이 있다. 본 논문에서는 코어/쉘 구조로 안정화된 II-VI 반도체 양자점 층을 아래 그림 1과 같이 실리카 콜로이드 내에 배열한 하이브리드 구조를 소개하고, 이 하이브리드 구조를 표면개질 하여 LED 칩 위에 패키징 함으로써 백색광을 제조한 연구 및 더 나아가 중심에 초상자성 클러스터 핵을 배치하고 이를 둘러싼 실리카 콜로이드 표면 가까이에 양자점 층을 배열한 초상자성 하이브리드 구조를 합성하여 이를 on-site sensor에 적용한 연구 결과를 소개한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.579-587
• /
• 2001

This study investigates particle collection characteristics of a cylindrical electrostatic precipitator. Experimental work has been made for the submicron particles. The effects of polarity of discharge electrode wire, particle diameter, gas velocity, gas temperature, and specific corona power on the particle collection efficiency are investigated. The efficiency of negative corona is higher than that of positive corona. as the particle diameter increases, the efficiency is decreased when the diameter is in the range of 0.02-0.6 micron, but is increased for the nanometer particles with diameter smaller than 0.02 micron. The efficiency is increased with increase of specific corona power. As the gas temperature increases, overall collection efficiency is increased for a negative corona, but is deceased for a positive corona.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.572-578
• /
• 2001

This study conducts a laboratory measurement on a cylindrical electrostatic precipitator(ESP) with a 30mm-diameter cylinder. Several kinds of test aerosols are generated with an atomizer and a diffusion dryer. The effects of applied voltage, flow state, gas velocity, and gas temperature on the electrical characteristics of the precipitator and onset of corona are experimentally investigated. The corona onset voltage is decreased, as diameter of discharge electrode wire becomes small or temperature of the precipitator increases. As the fluid velocity or particle load in the precipitator increases, the corona current is decreased.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.135-145
• /
• 2007

The needs for the ultra fine particles have been increased in preparation field of raw powders such as fine ceramics and high functional products. In this study, a series of wet grinding experiments were carried out on inorganic powders such as calcite, pyrophyllite and talc by a stirred ball mill. The particle size distribution of ground products of each test material fur a given grinding time was found to be expressed by the grinding rate (selection function) which was obtained from the grinding kinetics analysis. The median diameter decreased from 6.49 to $0.47{\mu}m$ in calcite, and decreased from 3.91 to $1.14{\mu}m$ in pyrophyllite. However, in talc, median diameter was decreased a little bit from 10.30 to $6.67{\mu}m$. The grinding rate changing on calcite and pyriphyllite were similar at the same conditions. However, in the case of talc, it was observed that the grinding rate was not increased compared to other samples.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1034-1042
• /
• 1996

Various $TiO_2-SiO_2$ composite powders were prepared by the modified sol-gel method using 1-dodecanol as DCCA (Dryng Control Chemical Additive ). Their characterizations were carried out and their photocatalytic catalysis was examined on the evolution reaction of hydrogen. The weight losses at $500^{\circ}C$ of only $TiO_2$ and $SiO_2$ powders were 33. 0wt% and 42.5wt%, respectively, and those of the $TiO_2/SiO_2$ powders ($TiO_2/SiO_2=25/75$, 50/50 and 75/25) were about $70.0{\pm}3.0wt%$. The released substances from the powders were almost organic matters. The as-prepared powders except only $TiO_2$ powder were amorphous. Transformation of anatase to rutil was hindered by $SiO_2$ component and the crystallinity of anatase was decreased with increasing $SiO_2$ contents. The as-prepared powders were bulky states. By heating at $600^{\circ}C$ for 1 hr $TiO_2-SiO_2$ powders ($TiO_2=100%$, $TiO_2/SiO_2=75/25,\;50/50$) showed agglomerates consisted of particles in submicron, but those of $TiO_2/SiO_2=25/75$ and $SiO_2=100%$ were still bulky states. Specific surface area of the powders heat-treated at $600^{\circ}C$ for 1hr was increased with $SiO_2$ concents and their pore sizes were also depended on $SiO_2$ contents. The photocatalytic activity of $TiO_2/SiO_2=75/25$ heat-treated at $600^{\circ}C$ for 1hr was 0.240mo1/h.g-cat as $H_2$ evolution rate. This value was about 2.0 times that of P-25(Degussa P-25) as a standard photocatalyst.