• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.

• Journal of Drive and Control
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2021

In a hydraulic control system, since a hydraulic cylinder drives a relatively large mass of an object, an external load force acts as a disturbance on the control performance of the system. Additionally, as the hydraulic system is used for a long period, there are disturbances that occur gradually, such as a drop in supply pressure because of abrasion of the pump, oil leakage from a valve, and oil leakage from a cylinder. In this study, a state feedback controller based on a linearization technique is applied. To prevent the performance degradation of the controller from the load disturbance, an Extended Luenberger observer (ELO) is used for the Extended system. The case of using the proportional controller, which is a representative linear controller, and the result of using the controller designed in this study are compared and reviewed through simulation. Also, we propose an experimental gain-setting method for a state feedback controller that can be used at industrial sites, and examine how the stability and control performance of the system changes because of the disturbance inputs through the experimental results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.397-402
• /
• 2016

To produce adequate electricity in nuclear and thermal power plants, an optimal amount of steam should be supplied to a generator connected to high- and low-pressure steam turbines. A turbine output control device, which is a special steam valve employed to supply or interrupt the steam to the turbine, is operated using a hydraulic servo actuator. In power plants, the performance of servo actuators is degraded by the air generated from the hydraulic system, or causes frequent failures owing to an increase in the wear of the seal. This is due to the seal being burnt as generated heat using the produced compressed air. Some power plants have exhausted air using a fixed orifice, and thus they encounter power loss due to mass flow exhaust. Failures are generated in hydraulic pumps, electric motors, and valves, which are frequently operated. In this study, we perform modeling and analysis of the load-sensing air-exhaust valves, which can be passed through very fine flow under normal use conditions, and exhaust mass flow air at the beginning stage as with existing fixed orifices. Then, we propose a method to prevent failures due to the compressed air, and to ensure the control accuracy of hydraulic servo actuators.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.190-190
• /
• 2004

목표물이 시선의 중심에서 벗어났을 때 모터를 구동시켜 목표물을 시선의 중심에 고정시킴과 동시에 외란으로 인한 카메라의 시선이 흔들리는 것을 막아주는 것을 시선 안정화 시스템이라 한다. 이러한 시스템은 능동 서스펜션 역할출 하는 서보제어기 설계기술이 요구된다. 이론 위하여 본 연구에서는 3축의 회전운동이 가능하고 회전운동에 따른 카메라의 시선의 회전축이 일체화가 되도록 하는 짐벌(gimbals) 구조를 설계한다.(중략)

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.321-330
• /
• 2001

Magnetic bearing system is frequently used for high-speed rotating machines because of its frictionless property. But the magnetic bearing system needs feedback controller for stabilization. This paper presents a robust controller design by using linear matrix inequality for magnetic bearing system which shows the control performance and robust stability under the physical parameter perturbations. To the end, the validity of the designed controller is investigated through computer simulation.

• Annual Conference of KIPS
• /
• 2020.05a
• /
• pp.611-614
• /
• 2020

본 논문은 안정적으로 계단을 주행하는 로봇에 관한 연구로 바퀴변형 시스템의 설계 방법을 제시하고, 기존의 계단극복 로봇의 문제점 중 하나인 계단 주행 시 발생하는 추락을 IMU센서와 서보모터를 이용한 방지법과 아날로그 IR센서를 통한 간단하고 빠르게 계단을 감지하는 방법을 제시한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.206-215
• /
• 2013

In this paper, a synchronization control technique of dual-servo motor driven press system is proposed. An independent cascade PID control technique has been applied to the conventional press system for advancement of control stability. However, it is not easy to reduce synchronous error using the independent cascade PID control technique when some different load disturbances are involved in each motor. The eccentric error of the slide caused by the problem degrade the control performance of the BDC(Bottom Dead Center). In order to achieve reduction of the synchronous error between two servo motors and accurate position control simultaneously, a new control scheme comprised with cascade PID control loop and cross-coupling loop is proposed. In simulation using Matlab SIMULINK, the AC servo system is designed. The control performance of proposed technique is compared with conventional control technique to the model of AC servo system. Also, the sub-scale model of dual-servo motor driven press system which can replicate the slide motion is constructed for experimental verification for the performance of the proposed control technique. The cross-coupling control technique reveals more precise and stable performances in the position and synchronization controls.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.270-276
• /
• 2003

The disturbance observer (DOB) has been widely utilized fer high precision and high speed motion control application. However, it still lacks the analysis for the robustness brought by using DOB. This paper summarizes six guidelines for the design of DOB taking into account the robustness and control performance in case of the second order system. For effectiveness of the proposed guideline, the actual implementation and experimental results of the DOB is compared in the Optical Disk Drive(ODD) servo system. In the DVD player and DVD-ROM drive, the guidelines of DOB are useful, and the disturbance rejection performance is improved under the DOB system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.39-46
• /
• 1999

Disturbances acting on the track-following servo system of an optical disk drive inherently contain significant periodic components that cause tracking errors of a periodic nature. Such disturbances can be effectively rejected by employing a repetitive controller, which must be implemented carefully in consideration of system stability. Plant uncertainty makes it difficult to design a repetitive controller that will improve tracking performance yet preserve system stability. In this paper, we examine the problem of designing a repetitive controller for an optical disk drive track-following servo system with uncertain plant coefficients. We propose a graphical design technique based on the frequency domain analysis of linear interval systems. This design method results in a repetitive controller that will maintain system stability against all admissible plant uncertainties. We show simulation and experimental results to verify the validity of the proposed design method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.215-220
• /
• 1988

The oscillatory hydraulic servosystem and the stable hydraulic servosystem under proportional control were feedback-controlled respectively using the estimated states of the observer. The observer was constructed in the analog computer and then it was interfaced with the real hydraulic servosystem to excute the experiment. As a result of experiment, the system that had been stable under proportional control responded more rapidly than before and the system that had shown oscillatory phenomenon under proportional control became stable with the same maximum acceleration and velocity that it had started under proportional control.