• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.751-753
• /
• 1999

본 논문에서는 영상의 텍스쳐 정보를 이용하여 일반 영상에 대한 내용기반 영상 검색을 수행할 수 있는 알고리듬을 제안한다. Gabor 웨이브렛 변환을 이용하여 Gabor 필터 뱅크 내의 각 필터에 의해 필터링된 대역의 평균과 표준편차를 영상의 특징 벡터(Gabor Texture Feature)로 추출하여 영상들간의 유사성을 계산하는데 사용한다. 논문의 목적이 영상에 가해진 외적 변형, 즉 잡음 첨가, 블러링, 샤프닝 등과 같은 변형에 강인하게 동작할 수 있는 텍스쳐 특징 기반 영상 검색 기법을 제안하는 것이므로, 기존의 Gabor 필터만을 사용하여 텍스쳐 특징을 추출하여 검색의 기준으로 삼을 경우에 발생할 수 있는 주파수 성분의 변화에 대한 민감성을 Daubechies의 웨이브렛 필터를 사용하여 낮은 해상도에서 영상을 해석함으로써, 외적 변형에 대하여도 강인하게 동작할 수 있는 알고리듬을 제시하였다. 기존의 텍스쳐를 이용한 검색이 주로 텍스쳐 영역(textured region)에 대한 해석만을 하였지만, 본 논문에서는 이를 일반 영상에 적용하였으며, 일반 영상에 대해서도 효율적인 검색을 수행할 수 있음을 보였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.49-52
• /
• 2008

The numerical analysis for gas temperature of turbine blade surface has been performed to investigate development of temperature with various blade edge shape. Two different types of the turbine which one is "Sharp" edge and the other is "Round" edge was modeled. Computations have been carried out several turbine rotational speeds in the range from 0 to 10,000 rpm for the each types of turbine edge shape. As a result, the more rotational speed of turbine increased, the more turbine blade's temperature decreased. It is also found that the surface temperature of turbine blades for sharp type edge were lower than the round type edge.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.5
• /
• pp.65-76
• /
• 2001

In this paper, performance of frequency-based watermarking methods is compared, which are used to protect copyright of image data. For performance comparison of each transform method, a test image is transformed into frequency domain by a full- and block-discrete cosine transforms and wavelet transform, and after general image processing, robustness of each transform is evaluated with using the same watermark signals. Simulation results show that the watermarking method based on DCTs are more robust than WT. Especially, $8{\times}8$ BDCT is most robust for JPEG lossy compression and sharpening, while $8{\times}8$ FDCT is best. for smoothing and scaling. In addition, watermarking based on BDCT shows decreasing robustness for a larger block size, compared with general image processing.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2011

Zero-watermarking is a digital watermarking technique that can escape from data distortion and quality degradation by no watermark insertion into digital images to be watermarked. This paper proposes DCT0CRT, a CRT-based zero-watermarking technique in the domain of DCT. One of the DC and low-frequency AC coefficients of each DCT block chosen in chaotic way from an image is selected by testing whether it satisfies the CRT-based condition matching with the watermark bit to be embedded. Such selection information forms a key to extract the watermark from the watermarked image. Experimental results show that the image quality watermarked by DCT0CRT is better than that watermarked by any other CRT-based watermarking techniques and the inserted watermark is robust against some common attacks such as sharpening, blurring, and JPEG lossy compression.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.61-61
• /
• 1999

저항이 5$\Omega$-cm인 n-type Si(100) 웨이퍼를 실리콘 식각시 마스크로 사용하기 위하여 습식 열산화법을 이용하여 100$0^{\circ}C$에서 SiO2을 2400$\AA$ 성장시킨 후, OPCVD 공정을 통해 785$^{\circ}C$서 SiH2Cl2 가스 30sccm과 NH3가스 100sccm을 이용하여 Si3N4를 3000$\AA$ 증착시켰다. 이 웨이퍼를 포토-리쏘그라피 공정을 거쳐 지름 2$\mu\textrm{m}$의 포토레지스트 패턴을 제작한 후 600W의 RF power하에서 CF4 가스 10sccm, CHF3 가스 15sccm, O2가스 8sccm 및 Ar가스 10sccm을 이용하여 MERIE 방법으로 Si3N4를 식각한 다음, 7:1 BHF 용액내에서 30초간의 습식식각을 통해 40wt.%의 KOH 용액내에 8$0^{\circ}C$에서 30초간의 이방성 식각을 통해 피라미드 모양의 Si FEA(field emitter array)를 제작하였다. 본 실험은 다음과 같이 완성된 Si FEA를 샤프닝 산화 후 산화막 식각을 통해 마스크를 제거한 다음, tip의 열화학적 내구성을 증가시키고 장시간 구동시 안정성과 전계방출 전류밀도를 높이기 위해 tip의 표면에 Ti를 sputter 방법으로 약 300$\AA$ 증착시킨 후, RTA 장비를 이용하여 2단계 열처리 (first annealing:$600^{\circ}C$/30sec, second annealing : 85$0^{\circ}C$/15sec)를 통해 Si FEA의 경우보다 낮은 turn-on 전압과 높은 전계방출 특성을 나타낼 것으로 기대된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.361-363
• /
• 2013

비파괴 검사란 재료나 제품을 원형과 기능에 변화를 주지 않고 실시하여 원하는 정보를 획득할 수 있는 검사를 의미한다. 비파괴검사는 점검자의 육안 조사를 통한 수작업으로 이루어지고 있기 때문에 점검자의 주관이 개입되며, 점검자에 따라 검사 결과의 차이가 있을 수 있으므로 신뢰도의 차이가 발생하게 된다. 그러므로 본 논문에서는 비파괴 검사를 이용하여 획득한 세라믹 소재 영상에서 효율적으로 결함을 검출하는 방법을 제안한다. 제안된 방법은 세라믹 소재 영상에 가우시안 필터링 기법을 적용하여 잡음을 제거하고, Ends-in Search Stretching 기법을 적용하여 명암 대비를 강조한다. 명암 대비가 강조된 영상에 샤프닝 기법을 적용하여 윤곽선을 강조한다. 윤곽선이 강조된 영상에 $3{\times}3 $ Roberts 마스크를 적용하여 강조된 윤곽선을 추출하고, Glassfire 기법을 적용하여 라벨링한 후, 시그마 퍼지 이진화 기법과 형태학적 정보를 이용하여 잡음을 제거하고 결함 영역을 검출한다. 제안된 방법을 세라믹 소재 영상을 대상으로 실험한 결과, 효율적으로 결함을 검출하는 것을 확인할 수 있었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1230-1237
• /
• 2007

The vehicle noise is classified into interior and radiated exterior noise. And it influences on consumer's vehicle decision and traffic noise environment very much. In case of the vehicle exterior noise, it is related with traffic noise and in case of the interior noise, it is related with driver's and passenger's sensitivity quality. Because these influenced on drivers and traffic environment, so standards are restricted by the laws and regulated for the measurement. But, the existence standards measuring the only sound pressure level are limit to reflect consumer's sensitive aspects. Therefore in this study, the recent standards and laws were searched about domestic and abroad papers and the testing mode for the sound quality(SQ) evaluation was constructed about the vehicle interior noise. Finally, we aimed at the standard establishment to evaluate the vehicle interior SQ using statistics method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.485-494
• /
• 2006

The state-of-the-art of low-noise fan design usually includes the consideration of optimal sound level and sound quality. The influential design parameters of the noise level by the centrifugal fan were selected based on the preliminary test. The centrifugal fans were designed according to the experiment plan method by specifying the selected design parameters. The experiment with these machined mock-up's of centrifugal impellers suggested the major design parameters among many, having impacts upon the indices of sound quality (e.g. loudness, sharpness, roughness and fluctuation strength) at the same operation point. With the response surface method, the major design parameters selected thereafter were analyzed to estimate each contribution upon the sound quality of the centrifugal fan, and the optimal values were drawn by the consideration of the sound quality levels and their regression equations. In addition, the validity of the regression equations was numerically verified by means of the coefficient of determination. Furthermore, the mechanism by which the centrifugal fan impeller influences the determinants of its sound quality was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4726-4732
• /
• 2013

The Domestic boat has been manufactured by hull form of typical foreign boat. In this study, design environment for polyethylene boat is analysed to create new hull form of the boat and design elements are extracted from existing boats and consumer preferences. Key elements in polyethylene boat design are three words "semi-classic, urban and sporty". Hull resistance and engine power for new developed boat can be expected by Orca 3D program. This result indicates that engine power of the boat is much less than that of commercial boat.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.242-249
• /
• 1999

This study was conducted to investigate the effect of seedling age and irrigation set point on the growth and yield of white spined cucumber cv Sharp-1. Leaf area, number of lateral vines and root weight measured 70 days after planting were the greatest in 30 day-old seedling treatment. Inorganic element content measured 30 days after planting was the greatest in 30 day-old seedling treatment. Total and marketable yields were greater in 30 day-old seedlings than those of 20 or 40 day-old seedlings. The early yield was the least in 20 day-old seedlings. 40-day old seedlings lost vigor quickly. No significant differences in growth and yield observed as affected by irrigation set point.