• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.32-43
• /
• 1998

혐기성대상과정중 메탄생성균(methanogenic bacteria)에 의한 메탄생성시 주요 기질인 아세트산 (acetic acid)을 분해할 경우에 여러 가지 복합기질 중 아미노산 첨가에 의한 분해속도증가에 미치는 영향과 투입한 아미노산이 미생물에 의하여 생체량으로 합성되는 정도를 고찰하였다. 실험결과 메탄생성균은 glycine, serine, threonine, aspartic acid, trytophan 등의 혐기성미생물의 생체량합성에 필요한 물질을 투입할 경우에 아세트산의 분해속도가 증가하였으며, 여러 가지 아미노산을 혼합하여 주입한 결과 분해속도가 17% 향상되었다. 한편, 메탄생성균의 lysing에 의하여 생성된 유기물은 메탄이나 이산화탄소의 최종산물로 전환되기보다는 새로운 메탄생성균의 생체량을 형성하는데 직접 이용되었으며, 아세트산의 분해속도를 52% 증가시켰다. 단순기질(sole substrate)과 복합기질(complex substrate)의 분해는 미생물의 생체량합성에 필요한 여러 가지 중간대사산물간의 상호자극효과에 의하여 복합기질이 용이한 것으로 나타났으며, 유입기질내 활성이 강한 슬러지의 농도는 혐기성처리에 매우 중요한 부분을 차지하였다.

• Fiber Technology and Industry
• /
• v.4 no.1_2
• /
• pp.13-23
• /
• 2000

• 대한치주과학회:학술대회논문집
• /
• 1994.12a
• /
• pp.44-44
• /
• 1994

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.939-943
• /
• 1999

Recently there has been an explosion of interest in the topic of biodegradable polymers for medical applications. In this study, films were prepared by solution casting method using natural polymers (xanthan, locust bean, guar gum, chitosan and algin) as biomaterials. Biocompatibility of films prepared from natural polymer as a skin implant was evaluated. These biodegradable films were subcutaneously implanted in the back of rats and their biodegradability was investigated by the evaluation of changes in structure, film weight and hematology as a function of time for the biotransformation. The result of rats test showed that locust bean and guar gum induced some suspects of non-biocompatibility in the tissue by foreign body reaction 24 and 48 hrs after implantation. These results showed the potential of partial biodegradable films prepared from natural polymer for ideal skin biomaterials at short period.

• Journal of Biomedical Engineering Research
• /
• v.10 no.2
• /
• pp.117-124
• /
• 1989

The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan`s method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements.

• 대한치주과학회:학술대회논문집
• /
• 1994.12a
• /
• pp.7-8
• /
• 1994

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.851-856
• /
• 2016

Despite all the recent advances in biodegradable material-based microneedles, the bending and failure (especially buckling) of a biodegradable microneedle during skin tissue insertion remains a major technical hurdle for its large-scale commercialization. A reduction in skin tissue puncture force during microneedle insertion remains an essential issue in successfully developing a biodegradable microneedle. Here, we consider uniaxial and equibiaxial prestrains applied to a skin tissue as mechanophysical stimuli that can reduce the skin tissue puncture force, and investigate the effect of prestrain on the changes in skin tissue puncture force. For a porcine skin tissue similar to that of humans, the skin tissue puncture force of a flat-end microneedle is measured with a z-axis stage equipped with a load cell, which provides a force-time curve during microneedle insertion. The findings of this study lead to a quantitative characterization of the relationship between prestrain and the skin tissue puncture force.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.167-177
• /
• 2013

The use of mechanical anastomosis coupler instead of sutures has been increasing in microvascular anastomosis surgery. However, non-biodegradable anastomosis coupler has problems such as not only inflammatory reaction but also remaining permanently in operation wound. Therefore, we fabricated biodegradable anastomosis coupler using injection molding process to overcome the limitation of non-biodegradable anastomosis coupler. In various injection molding process conditions, the shrinkage was calculated with different cylinder temperatures and injection molding pressures and anastomotic strength was measured. As a result, changes in shrinkage hole part larger than the pin part. In addition, the shrinkage in the cylinder at higher temperatures increase. However, the higher the injection pressure, shrinkage tends to decrease, respectively. In-vitro degradation behavior of PCL anastomotic coupler evaluated for 12 weeks, water uptake was increased and molecular weight was accompanied by a reduction in mass of the biological degradation and reduction of anastomotic strength was confirmed. However, decreased levels of anastomotic strength enough to exceed the requirements of preclinical surgery, PCL microvascular anastomosis coupler suitable candidate materials that could identify.

• 대한치주과학회:학술대회논문집
• /
• 1994.12a
• /
• pp.46-46
• /
• 1994

• 대한치주과학회:학술대회논문집
• /
• 2002.11a
• /
• pp.105-106
• /
• 2002