• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.463-469
• /
• 2010

To suggest the practical use of fast growing tree, we estimated the physical and sound absorption properties of Cherospondias axillaris which is one of the japanese fast growing species. The average annual ring width and air dry specific gravity were 8 mm and 0.55 respectively. The sound absorption coefficients of Cherospondias axillaris wood generally seemed to be a little higher than those of other construction materials such as 6 mm thick gypsum board and 18 mm thick fiberboard, and considered that it could be used as a constructing material owing to relatively good mechanical properties and sound absorption properties.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.411-411
• /
• 2023

미래 대기 이산화탄소 농도가 증가함에 따라 강수 등 기후의 변화하고, 이는 유출량을 포함한 수문 순환 뿐 아니라 지면 식생 생장에 영향을 줄 것으로 예상된다. 이에 본 연구에서는 미래 CO2 증가에 따른 식생의 변화와 이로 인한 지표 유출량의 변화에 대해 이해하고자 한다. Intergovernmental Panel on Climate Change (IPCC) 6차 평가보고서에서 제시한 표준 온실가스 경로 중 탄소 모듈이 포함된 Coupled Model Intercomparison Project phase 6 biogeochemistry (CMIP6-BGC) 모델과 탄소 모듈이 포함안된 CMIP6 모델 결과를 활용하였다. 공통 사회경제경로 시나리오(Shared Socio-economic Pathway; SSP) 중 고탄소 시나리오인 SSP585에 따른 모델 결과물을 활용하였다. 표면 유출량 자료에 과거 기간 임계수준 방법을 (Threshold Level Method) 적용하여 동아시아 지역 극한 건조 및 습윤 상태의 빈도와 강도를 CMIP6-BGC와 CMIP6에 대해 평가하였다. CMIP6-BGC 경우, 건조 및 습윤 상태의 빈도는 각각 6.17%, 5.03% , CMIP6 경우 각각 9.29%, 6.70% 으로 예측되어, CMIP6-BGC가 CMIP6 보다 극한 상태를 과소평가하는 경향을 보였다. 또한, 잎 면적 지수(Leaf Area Index; LAI), 증산량 등의 변수를 분석하여, 기 도출된 CMIP6-BGC와 CMIP6 간의 극한 건조 및 습윤 상태 예측의 차이가 발생한 메카니즘을 이해하고자 하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.481-481
• /
• 2022

본 연구에서는 기후 변화 완화에 대한 잠재력을 평가하기 위해 국내에서 가장 우세한 소나무 종인 Pinus densiflora의 기후변화에 대한 반응을 평가하였다. 기후변화의 시나리오로 4가지 대표 농도경로(RCP)에 기반 하여 CO₂, 강수량, 온도의 변화를 개별 및 조합하였다. 생태수문학적 및 지구화학적 모델인 ecosys를 활용 및 보완하여 광릉 시험림에 적용하였다. 본 연구에서는 대기 중 CO₂ 증가가 총일차생산량(GPP)과 순일차생산량(NPP)에 미치는 긍정적인 영향이 강수량과 기온 변화로 인한 부정적인 영향보다 더 큰 것으로 나타났다. 특히, 기준 시나리오와 비교하여 각각 RCP2.6, 4.5, 6.5, 8.5에서 3.79%, 13.44%, 18.26%, 28.91%의 NPP 개선이 모의되었다. 또한, 본 연구에서는 지표하 질소 유출과 지표 N₂O 플럭스가 기후 변화가 심해짐에 따라 소나무 생장 향상 및 토양 수분 저하로 인하여 토양 질소 손실 감소가 모의되었다. 기후변화의 강도가 증가함에 따라 증발산량이 증가하였지만, 기공 감소는 토양에서 흡수하는 물이용 및 광합성 효율 증진을 가져왔다. 이러한 결과는 소나무가 기후 변화를 완화하는 환경 친화적인 선택으로 작용할 수 있는 잠재성을 나타낸다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2015

In this study, a blast furnace slag with the alkaliphilic microorganism (Bacillus halodurans) alkaline activator was used to cement natural soils in the field. A low-cost and massive microbial solution for cementation of field soils was produced and compared with existing microbial culture in terms of efficiency. A field soil was prepared for three different cementation areas: a cemented ground with microbial alkaline activator (Microbially-treated soil), a cemented ground with ordinary Portland cement (Cement-treated soil), and untreated ground (Non-treated soil). The testing ground was prepared at a size of 2.6 m in width, 4 m in length, and 0.2 m in depth. After 28 days, a series of unconfined compression tests on the cement-treated and microbially-treated soils were carried out. On the other hand, a torvane test was carried out for non-treated soil. The strength of field soils treated with microorganism was 1/5 times lower than those of cement-treated soil but is 6 times higher than non-treated soil. The pH measured from microbially-treated soil was about 10, which is lower than that of cement-treated soil (pH = 11). Therefore, it is more eco-friendly than Portland cemented soils. The C-S-H hydrates were found in both cement- and microbially-treated soils through SEM-EDS analyses and cement hydrates were also found around soil particles through SEM analysis.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.333-342
• /
• 2010

For the energy-saving production of fresh vegetables in poor environment such as the Antarctic, a container-type plant factory was designed and developed. To maximize space usage of the 20 feet container ($L5.9m{\times}W2.4m{\times}H2.4m$), a three-level hydroponic cultivation system was installed and the nutrient solution was supplied by bottom watering. Using this system, 3 lettuce cultivars were grown under different the light source (light intensity). After 2 weeks from the transplanting, fluorescent lamp ($145\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) showed the best fresh weight of top part and leaf area. However, After 4 weeks, fluorescent lamp plus metal halide lamp ($150\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) led to the optimum growth of the each lettuce cultivar. The cultivar, 'Cheongchima', showed the best fresh weight of top part and leaf area, followed by 'Jeokchukmyeon' and 'Lollo rosa'. The chlorophyll concentrations (SPAD) showed no significant difference among the sources of lights. However, 'Cheongchima' showed relatively high chlorophyll concentration. With the above results, we found that the growth of lettuce is depend on light intensity and even at same intensity, the growth is different among the cultivars. Therefore, the selection of optimum cultivar should be considered in the plant factory system that has only weak light density.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.108-117
• /
• 2007

This research was performed to investigate the feasibility of bamboo as a raw material for the manufacture of plywood. Wood veneer-bamboo zephyr composite boards (WBCB) were manufactured using keruing (Dipterocarpus sp.) veneers and hachiku bamboo (Phyllostacbys nigra var. henonis Stapf) using various adhesives, and the effect of the method and amount of resin spread on the mechanical properties of the composites were investigated. The WBCB manufactured using polymeric isocyanate (PMDI) showed the best mechanical properties, followed by phenol-formaldehyde resin (PF), phenol-melamine-formaldehyde resin, urea-melamine-formaldehyde resin, and urea-formaldehyde resin. However, considering the operation feasibility as well as mechanical properties, PF resin proved to be the appropriate adhesive for the practical purpose. As the amount of resin spread increased, the mechanical properties of 5-ply WBCB with 12 mm thicknesses manufactured using PF resin tended to increase, and more failure occurred at the interface between veneer and bamboo zephyr than at the interface among bamboo zephyrs. This result suggests that penetration of resin into bamboo zephyr could be the important factor. In this research, the appropriate amount of resin amount was $320g/m^2$. 5-ply WBCBs were manufactured using various methods of resin spread but the effect of the methods on the mechanical properties showed no little difference, which meant that the method of resin spread could be chosen considering the manufacturing conditions and operation feasibility.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.282-288
• /
• 2005

This study was carried out to estimate aboveground carbon contents associated with four years of thinning treatment of Quercus acuta stands in Wando Arboretum, Jeonnam. Stand thinning was conducted over four years using stand table projection for each thinning treatment. Ten sample trees were cut in the surveyed area. Estimation of aboveground biomass was made using the equation model $W=aD+bD^2$ where W is oven dry weight and D is DBH in cm. The total aboveground biomass for each intensity treatment area was : control (148.4 ton/ha), light (105.6 ton/ha), moderate (68.7 ton/ha) and heavy (39.1 ton/ha). Aboveground carbon storage for Quercus acuta stands was found by multiplying dry weigh t (ton/ha) by 0.5. Carbon storage and increment after four years was: control (74.2 tonC/ha), light (52.8 tonC/ha), moderate (34.3 tonC/ha) and heavy thinning intensity area (38.2tonC/ha).

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.38-45
• /
• 2015

BACKGROUND: For commercial production of greenhouse crops under shorter day length condition, supplementary radiation has been usually achieved by the artificial light source with higher electric consumption such as high-pressure sodium, metal halide, or incandescent lamps. Light-Emitting Diodes (LEDs) with several characteristics, however, have been considered as a novel light source for plant production. Effects of supplementary lighting provided by the artificial light sources on growth of Kale seedlings during shorter day length were discussed in this experiment. METHODS AND RESULTS: Kale seedlings were grown under greenhouse under the three wave lamps (3 W), sodium lamps (Na), and red LEDs (peak at 630 nm) during six months, and leaf growth was observed at intervals of about 30 days after light exposure for 6 hours per day at sunrise and sunset. Photosynthetic photon flux (PPF) of supplementary red LEDs on the plant canopy was maintained at 0.1 (RL), 0.6 (RM), and $1.2(RH){\mu}mol/m^2/s$ PPF. PPF in 3 W and Na treatments was measured at $12{\mu}mol/m^2/s$. Natural light (NL) was considered as a control. Leaf fresh weight of the seedlings was more than 100% increased under the 3 W, Na and RH treatment compared to natural light considering as a conventional condition. Sugar synthesis in Kale leaves was significantly promoted by the RM or RH treatment. Leaf yield per $3.3m^2$ exposed by red LEDs of $1.2{\mu}mol/m^2/s$ PPF was 9% and 16% greater than in 3W or Na with a higher PPF, respectively. CONCLUSION: Growth of the leafy Kale seedlings were significantly affected by the supplementary radiation provided by three wave lamp, sodium lamp, and red LEDs with different light intensities during the shorter day length under greenhouse conditions. From this study, it was suggested that the leaf growth and secondary metabolism of Kale seedlings can be controlled by supplementary radiation using red LEDs of $1.2{\mu}mol/m^2/s$ PPF as well as three wave or sodium lamps in the experiment.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.119-130
• /
• 2006

As unialgal cultures to examine the growth kinetics of an algal species, Microcystis aeruginosa was grown in chemostats with nitrogen and phosphorus limitation. The nutrient concentrations of $NH_4\;^+\;and\;PO_4\;^{3-}$ to limit the growth of M, aeruginosa were approximately 200 ${\mu}M$ and 7 ${\mu}M$, respectively. Cell size of the algae decreased towards the $NH_4$-nitrogen limitation under a constant dilution rate, while it increased in the $PO_4$-limitaion. The cell quota of nitrogen under nitrogen-limited conditions was 6.1 ${\mu}mol$ mg $C^{-1}$ and, under nitrogen sufficient conditions, ranged from 9.5 ${\mu}mol$ mg $C^{-1}$ to 12.4 ${\mu}mol$ mg $C^{-1}$. In addition to the cell quota, the half-saturation constants for nitrogen uptake ($K_s$) and the growth rate (${\mu}_m$) was 36 ${\sim}$ 61 ${\mu}M$ and 0.28 ${\sim}$ 0.35 ${\mu}mol$ cell ${\cdot}$ $hr^{-1}$ to show high values in comparison with other algal species. As the limiting concentration, cell quota and uptake rate of M. aeruginosa were higher than those of any other species, the its nitrogen requirement would be great. In the other side, as the half saturation constant ($K_s$) for nitrogen uptake was higher, and the ratios ofmaximum uptake rate ($V_m$) and $K_s$ was relatively low, the species would have the low competitive ability in the low nitrogen concentration in the ambient water. However, the low concentration of nitrogen in the Nakdong River during the Microcystis outbreak would be the inevitable results of the algal blooms. In the lower Parts of the Nakdong River, the nutrient status was coupled with the growth kinetics of the blooming algae to have clear seasonal variations through a year.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.298-305
• /
• 2011

This study was conducted to enhance the stem firmness of standard chrysanthemum 'Baekma' bred in Korea for commercial quality improvement and inhibition of stem breaking during transportation through foliar spray with calcium agents. Calcium agent screening 'Baekma' was examined using $CaCl_2{\cdot}2H_2O$, $Ca(NO_3)_2{\cdot}4H_2O$, and OS-Ca (natural liquid calcium compounds extracted from oyster shell) depending on each concentration (0, 0.001, 0.01, 0.1, and 1.0%, respectively). All calcium agents sprayed with 1.0% caused chemical injury such as stem bending or leaf burn. OS-Ca also showed more sensitive response to chemical injury than the other calcium agents because OS-Ca was absorbed very well by 'Baekma' leaves. Maximum stem firmness measured during the final harvest was greater in OS-Ca than in the other calcium agents. Especially, maximum stem firmness was greatest in 0.01% OS-Ca. However, elastic strength and maximum bending stress were greater in 0.001% OS-Ca than in the others. Thus, OS-Ca ranged from 0.005 to 0.05%, which did not show any chemical injury, was finally selected as the first candidate for hardening the stem of 'Baekma'. The next experiment using OS-Ca was conducted with the concentrations of 0, 0.005, 0.01, and 0.05%, respectively. From the results, 0.05% OS-Ca showed better plant growth and parameters such as plant height, stem diameter (upper and middle part), the number of leaves, and dry weights of each part than the other concentrations of OS-Ca and control. As for stem firmness depending on OS-Ca concentration, the Ca content within stem, maximum firmness, elastic strength, and maximum bending stress of stem in 'Baekma' sprayed with 0.05% OS-Ca showed the highest values among all the treatments and it turned out to be very high level of significance between control and OS-Ca treatments. However, the area and percentage of the inside cavity within horizontal stem section in 'Baekma' did not show any significance between any treatments including control. Thus, stem firmness of 'Baekma' did not show any correlation with the inside cavity area of stem. In conclusion, we recommend foliar sprays with 0.05% OS-Ca at vegetative growth stage to enhance stem firmness of 'Baekma' during transportation.