• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.171-178
• /
• 2003

This study was conducted to investigate the effect of electric fusion methods on cell fusion rate and embryo development by somatic cell nuclear transfer in Korean Native Cattle. The KNC ear cell was cultured in vitro for confluence in serum starvation condition(DMEM＋0.05％ FBS) for cell confluence. The zona pellucida of IVM oocytes were partially dissection using micro pipette. Ear cells were transferred into an enucleated oocyte. The reconstructed embryos were electrically fused with Zimmermann Cell Fusion Medium(ZCFM). Nuclear transfer embryos were activated with a combination of 10${\mu}{\textrm}{m}$ calcium ionophore(5 min) and 2.0mM 6-DMAP(3 hr). The activated embryos were cultured in CR1 -aa medium contains 0.3％ BSA or 10％ FBS at 37$^{\circ}C$, 90％ $N_2$, and 5％ $CO_2$in incubator for 6 days. The fusion rates were 51.6％(chamber) and 68.9％(needle), respectively and there were significantly difference between the fusion method(P<0.05). But, lysis rates were not significantly different(10.7％, 11.5％), respectively. The cleavage rates were significantly different between the chamber method(73.2％) and needle method(80.3％), respectively(P<0.05). The rates of early embryos(2∼4cells) and blastocysts of chamber and needle methods were 54.1％, 61.1％ and 18.4％, 26.3％ respectively, and needle method was significantly higher than chamber method(P<0.05). But, morulae formation rate were not significantly differences between the chamber(6.7％) and needle(6.2) method(P <0.05). These result suggest that electric fusion of needle method was to be profitable for nuclear transfer embryo fusion rate, blastocyst formation rate and reduce of oocyte lysis.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.13-25
• /
• 2007

Viscosity, adhesion and cohesion of asphalt binder are very important characteristics in asphalt pavement. However, these characteristics can cause some problems such as inaccurate amount of asphalt mixture, reduction of asphalt content and loss of workability during asphalt pavement construction. Asphalt release agent has been used to solve these problems. Diesel oil and vegetable oil are generally used as an asphalt release agent in Korea. However, these agents have been criticized from environmental and binder integrity reasons. Therefore, this study evaluated the characteristics of asphalt release agents including diesel oil, vegetable oil and two emulsion type oils. From the study, it was found that the diesel oil resolved the binder within ten minutes and vegetable oil stripped the binder from mixture within one hour after contacting with asphalt mixture. And also, from the test for estimating the application cycle of asphalt release agent, it appears that diesel oil and vegetable oil should be applied to construction equipments every time in their uses. However, diesel oil and vegetable oil showed a good performance as a lubricant for detaching the asphalt mixtures from the truck bed.

• Korean Journal of Healthcare-Associated Infection Control and Prevention
• /
• v.21 no.2
• /
• pp.50-56
• /
• 2016

Background: Alternatives to carbapenem are increasingly needed to decrease the usage of carbapenem. We evaluated the possibility of using non-carbapenem antibiotics against urinary tract infections (UTI) caused by extended-spectrum beta-lactamase-producing Enterobacteriaceae (ESBL-PE). Methods: This retrospective study was performed at 2 university hospitals between October 2010 and December 2012. All diagnosed adult cases of ESBL-PE UTI were identified from the microbiological database. The subjects were divided into 3 groups based on the empirical antibiotic classes and susceptibility: carbapenem (C) group, susceptible non-carbapenem (SNC) group, and non-susceptible non-carbapenem (NSNC) group. Results: A total of 84 patients were eligible for analysis. For empirical therapy, 41, 23, and 20 patients were included in the NSNC, SNC, and C empirical groups, respectively. During the empirical therapy, 7 patients (17.1%) in the NSNC group, 18 patients (78.3%) in the SNC group, and 19 patients (78.3%) in the C group experienced clinical improvement. No significant difference was observed between the SNC and C empirical groups (P=0.192). Severe sepsis or shock was the predictor of empirical SNC treatment failure (P=0.048). There was a tendency to use carbapenem as a definite therapy in cases of NSNC. In contrast, empirical SNC was maintained as a definite therapy. Conclusion: SNC could be considered as an alternative to carbapenems for treating ESBL-PE UTI. This strategy might decrease the usage of carbapenem without clinical deterioration. However, it should be noted that SNC therapy may fail in the case of severe sepsis or shock.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.6
• /
• pp.724-732
• /
• 2000

Background : In patients with severe chronic lung diseases even a small pneumothorax can result in life-threatening respiratory distress. It is important to treat the attack by chest tube drainage until the lung expands. Pneumothorax with a persistent air leak that does not resolve under prolonged tube thoracostomy suction is usually treated by open operation to excise or oversew a bulla or cluster of blebs to stop the air leak. Pleurodesis by the instillation of chemical agents is used for the patient who has persistent air leak and is not good candidate for surgical treatment. When the primary trial of pleurodesis with common agent fails, it is uncertain which agent should be used f or stopping the air leak by pleurodesis. It is well known that inappropriate drainage of hemothorax results in severe pleural adhesion and thickening. Based on this idea, some reports described a successful treatment with autologous blood instillation for pneumothorax patients with or without residual pleural space. We tried pleurodesis with autologous bood for pneumothorax with persistent air leak and then we evaluated the efficacy and safety. Methods : Fifteen patients who had persistent air leak in the pneumothorax complicated from the severe chronic lung disease were enrolled. They were not good candidates for surgical treatment and doxycycline pleurodesis failed to stop up their air leaks. We used a mixture of autologous blood and 50% dextrose for pleurodesis. Effect and complications were assessed by clinical out∞me, chest radiography and pulmonary function tests. Results : The mean duration of air leak was 18.4${\pm}$6.16 days before ABP (autologous blood and dextrose pleurodesis) and $5.2{\pm}1.68$ days after ABP. The mean severity of pain was $2.3{\pm}0.70$ for DP(doxycycline pleurodesis) and $1.7{\pm}0.59$ for ABDP (p<0.05). There was no other complication except mild fever. Pleural adhesion grade was a mean of $0.6{\pm}0.63$. The mean dyspnea scale was $1.7{\pm}0.46$ before pneumothrax and $2.0{\pm}0.59$ after ABDP (p>0.05). The mean $FEV_1$ was $1.47{\pm}1.01$ before pneumothorax and $1.44{\pm}1.00$ after ABDP (p>0.05). Except in 1 patient, 14 patients had no recurrent pneumothorax. Conclusion : Autologous blood pleurodesis (ABP) was successful for treatment of persistent air leak in the pneumothorax. It was easy and inexpensive and involved less pain than doxycycline pleurodesis. It did not cause complications and severe pleural adhesion. We report that ABP can be considered as a useful treatment for persistent air leak in the pneumothorax complicated from the severe chronic lung disease.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.91-99
• /
• 2010

We used a multiplex PCR primer set composed of 11 microsatellite (MS) markers and two sexing markers for gender detection. Genomic DNA extracted from hair roots of 3,510 Hanwoo were genotyped. Based on the 11MS markers, no animals had identical genotypes(TGLA227, BM2113, TGLA53, ETF10, SPS115, TGLA122, ETH3, ETH225, BM1824 and INRA23). The expected probability of identity among genotypes of random individuals (PI), the probability of identity among genotypes from random half-sibs ($PI_{half-sibs}$) and among genotypes of random individuals, and the probability of identity among genotypes from random sibs ($PI_{sibs}$) were estimated as $1.31{\times}10^{-23}$, $2.52{\times}10^{-16}$and $1.09{\times}10^{-6}$, respectively using the API-CALC program, version 1.0. We successfully completed the genotype analysis of 3,510 Hanwoo with a 3.93% genotyping failure rate. It was revealed that extracting DNA from the hair root was a time-efficient and cost-effective method to collect specimens for DNA isolation from live animals. This method also minimized stress for the animals during specimen collection. Among the hair roots from the back, belly, upper tail and lower tail, 5~13 hair roots of the lower tail led to the best genotype analysis results. Finally, we established a 96-well-format method of DNA preparation applicable for high- throughput genotype analysis.

• Journal of Plant Biotechnology
• /
• v.39 no.2
• /
• pp.114-120
• /
• 2012

An efficient in vitro propagation was established by using axillary bud explants of roseroot (Rhodiola rosea L.), which has been known as a medicinal plant in East Asia. Among various media tested, MS medium supplemented with 1.0 mg/L BA and 1.0 mg/L $GA_3$ was found to be the best for multiple shoot formation (15 axillary shoots per axillary bud). In addition 1/2MS medium containing 50 g/L sucrose was best for shoot elongation (7.8 cm) and increasing total chlorophyll contents (8.64 mg/g) best. Maximum number of roots (17.7 roots per explant) was observed on the medium without plant growth regulators. Propagated plants were successfully acclimatized to ex vitro conditions, with a survival frequency of 97% after 12 weeks. Most rooted shoots grew well and produced viable seeds when grown in vitro culture conditions. Therefore, R. rosea can be effectively propagated in vitro by the system we developed in this study.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.27-34
• /
• 2017

Our aim was to find the effective duration and culture conditions for microspore culture in a genetically variant cabbage (Brassica oleraceae L. var. capitata). We discovered that the '$2{\times}NLN$ medium containing $AgNO_3$ 1 mg/l, sucrose 13%' was most efficient in producing the cabbage embryos. The number of induced embryos was higher in $F_2$ or $F_3$ progeny generation than the $F_1$ hybrid cultivar used as plant materials. Thus, we recommend microspore culturing using progeny plants of failed $F_1$ cultivar. The acquisition ratio of embryos and plants derived from microspore was higher in the early flowering period as compared to the late flowering period. When transplanted in the soil, 71.2% plants developed from the early flowering period, compared to 27.0% from the middle period and 1.8% plants from the late period. Thus, we recommend microspore culture using buds collected during the early flowering period.

• Information Systems Review
• /
• v.14 no.2
• /
• pp.65-92
• /
• 2012

Smart work, which is defined as work performed at home, satellite offices or with the smart devices to continually collaborate with the co-workers in anytime, anywhere using IT, is attracting much attention as an alternative work way to cope with the demographical changes of the low fertility and aging. Whereas some implementation cases of smart work have been considered as the success, the other cases have been reported as the failure to implement smart work practices. Nevertheless, there are few researches to identify the reasons of successful ways to adopting smart work. This study integrated the IT-based changes with the smart work practices to identify the critical success factors of smart work in individual, organization and industry levels. As the results, we found out the expected values of introduction, core elements of implementation, and industry characteristics to efficient adoption for smart work. Also, this study compared these evidences with the incumbent smart work policies. The contributions of this study is to develop the guideline to adopting smart work, the smart work implementation strategy and the improvement on the business process.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.31-47
• /
• 2021

The purpose of this study is to demonstrate the moderating effect of technology development activities in the relationship between independent variables such as entrepreneurial orientation and technology innovation capabilities and dependent variables. As a result of analyzing the causal relationship between research variables, it was found that the higher the innovation and initiative among the sub-factors of entrepreneurial orientation, the more positive the technical commercialization performance and product completion. Among the sub-factors of entrepreneurial orientation, risk-taking was found to have a significant effect only on product completion. It was found that the higher the technology commercialization capability and technology convergence capability, the higher the technology commercialization performance, the technology commercialization performance. As a result of analyzing the moderating effect of technology development activities, it was found that technology development management ability, a sub-factor of technology development activities, controls the influence relationship between innovation and risk sensitivity and technology performance. In addition, it was found that the involvement in technology development planning controls the influence relationship between technology convergence capability and technology performance among sub-factors of technology innovation capability. Based on the above analysis results, this study made three suggestions as follows. First, the achievements of technology commercialization to achieve the superiority of corporate competition depend on progressive innovation and risk-taking based on entrepreneurial orientation. It is necessary to find a way to build entrepreneurial orientation from within the organization. Second, due to the nature of the ICT industry, which has a fast pace of technological development and changes in market acceptance, technology commercialization performance will be positive when the capabilities, technology, knowledge, and resources that can quickly lead to product production can be organically linked. Finally, corporate CEOs need to further promote innovation and risk-taking through phased and continuous research activities for technology development. In addition, it is necessary to establish a corporate culture that tolerates various strategies and failures so that understanding of technology convergence can lead to technological performance.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.517-523
• /
• 2001

Titanium miniscrews we being used increasingly as an anchorage for tooth movement, because they ate easy to place and to remove, increase the number of sites available, give minimum strain to patients regarding surgical procedures, and offer uneventful healing alter removal. The use of titanium miniscrews as an orthodontic anchorage has been reported in clinical case reports, but clinicians have experienced screw loosening when using such screws.' To our knowledge, there are no published reports evaluating the stability of miniscrews. Information about the length of miniscrews used in relation to the location is of some importance, as stability will vary depending on bone duality The purpose of this study was to evaluate a variety of Lengths of miniscrews (dimeter: 2mm) which were inserted in maxilla or mandible and to demonstrate in a dog model which miniscrew provides fundamental stability in the jaws. 10 mm long miniscrews in the maxilla and 8mm long: miniscrews in the mandible showed no clinical mobility and retained their position throughout an 8 weeks force (200g) application. The mucosal condition around the screws was healthy in cases in which miniserews were inserted in the alveolar bone between the roots and the head of the screws emerged into the attached gingiva. When the force application was terminated, radiographic analysis revealed neither rent resorption not periodontal pathology around the miniscrews that remained stable during the entire treatment period. This study suggests that if titanium miniscrews with adequate length are properly used depending on the location, they provide sufficient stability for orthodontic anchorage.