• Title/Summary/Keyword: 생산성 저하 요인

Search Result 116, Processing Time 0.028 seconds

The Effects of Welding Length on the Angular Distortion (용접 각변형에 미치는 용접길이의 영향)

  • 박정웅;강재완;정우현
    • Proceedings of the KWS Conference
    • /
    • 2004.05a
    • /
    • pp.232-233
    • /
    • 2004
  • 강구조물 제작 시 용접프로세스에 의해 용접부 근방에 불균일한 온도분포가 발생하여 용접변형이 발생된다. 이러한 용접변형은 좌굴강도와 피로강도를 저하시킬 뿐 아니라 구조물의 크기와 형상을 변화시켜 이를 교정하거나 수정하기 위해 추가작업을 실시해야함으로 생산성을 저하시키는 주요한 요인이 되고 있다. (중략)

  • PDF

Elderly(60+) and Productivity : Factors Influencing in Performance Evaluation of Elderly Employees (60+ 고령자의 생산성에 대한 기업의 평가와 영향요인)

  • Kim, Moon-Jung;Kim, Hong-Gi
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.11
    • /
    • pp.571-580
    • /
    • 2018
  • The purpose of this study is to evaluate the productivity of elderly employees over 60 years old and to analyze factors that directly or indirectly affect the productivity of elderly employees, based on empirical facts of HR managers. As a result, the factors that have a positive effect on the productivity of elderly employees were attitude and professionalism. The decline in physical capacity due to aging was recognized as a key factor that negatively affected the productivity evaluation of elderly employees. Among the management strategies to improve the work performance, it has been shown that work placement or job redesign according to physical competency contributes to improving the productivity of elderly employees. Also, providing safety education and communication opportunities among workers has a positive effect on productivity improvement. The results of this study suggest that it is important to improve worker productivity by arranging older workers' work experience to be able to demonstrate their accumulated career and expertise and to create a working environment that takes into account physical competence.

여름철 돈사 관리의 지혜

  • Park, Jun-Cheol
    • Feed Journal
    • /
    • v.4 no.7 s.35
    • /
    • pp.108-115
    • /
    • 2006
  • 우리나라는 사계절이 뚜렷한 기후적 환경으로 여름철 한낮의 외부온도가 35℃ 이상이 되는 날이 계속되고, 야간에도 25℃ 이상인 열대야가 지속되는 날이 많다. 이러한 조건하에서 양돈 생산성 향상을 위해서는 돼지의 사육환경과 성장단계별 적절한 사양기술을 투입하여야만 한다. 돼지는 생리적으로 추위에 의한 영향보다는 여름철 더위에 의한 영향을 쉬게 받으며, 이로 인해 자돈의 쇠약, 압사,수태율 저하, 번식장애 등으로 생산성 저하의 원인이 되며, 사육기간 중에 일시적인 고온스트레스가 돼지가 생존하는 동안 능력의 저하를 초래하게 된다. 특히 하절기 양돈장은 우기와 무더위로 인한 돈사내 온도의 급상승과 더불어 습도의 불균형에 의한 환경적 스트레스로 번식능력과 생산성에 크게 영향을 미칠 수 있으며,돼지에 일시적인 고온 스트레스 피해는 장기간 계속되며, 생존하는 동안 능력저하를 초래하기 때문에 농장별 사육여건에 따른 성장저해 요인을 제거하는 안목이 필요한 계절이다. 즉,5~9월 모돈에 고온스트레스가 가해지면 11~12월, 다음해 1월 모돈의 분만율은 최저가 되고 , 이 시기에 생산된 자돈은 추운겨울을 이겨내야 함으로 육성률도 낮아지며, 이로 인해 4~7월의 출하성적은 최저가 되는 것이다. 따라서 모돈 관리는 5~9월이 집중관리가 필요한 시기이기도 하다. 고온 다습한 환경 하에서 어미돼지는 영양불균형과 생체리듬의 파괴로 인하여 신생자돈의 폐사가 증가할 수도 있고,이유 후 1주일 이내 발정 재귀율이 약 30%정도 감소하고 무발정돈이 많이 발생되며, 수태가 되어도 조기 배아사멸 및 흡수로 인하여 수태율이 25%까지 감소될 수 있다. 현재 국내 양돈농가에는 예년과 같이 돼지 조모성질환의 발생이 늘어나고 있고, 어려움을 겪고 있는 농장이 많은 것으로 조사 보고되어지고 있는데, 이는 농장에 사육되는 돈군이 외부환경에 대한 적응능력과 질병에 저항력이 부족하여 쉽게 질병에 노출되어 발생함으로 농장에는 돼지가 스트레스를 받지 않게 외부 환경과 사양관리 측면에 심혈을 기울려 강건한 축군을 유지하려는 노력이 무엇보다 우선되어져야 한다고 생각된다. 따라서 본고에서는 여름철에 돼지 스트레스를 줄이고 생산성을 향상시키기 위해 돼지의 생리변화와 돈사 급수설비와 사료관리 및 사육관리에 대해 알아보고자 한다.

  • PDF

오리의 주요질병 및 예방대책

  • Korea Duck Association
    • Monthly Duck's Village
    • /
    • s.12
    • /
    • pp.8-13
    • /
    • 1999
  • 농장에서 생산성 저하의 가장큰 요인중에 하나가 질병에 의한 피해이다. 그럼에도 불구하고 국내 오리사육농가들은 오리질병에 대한 제대로된 프로그램없이 경험에 의해 오리를 사육하므로써 좀처럼 그 피해가 줄어 들지 않고 있다. 이에 강문일 전남대학교 수의과대학 교수가 종합축산지에 연재한 오리질병을 발췌하여 사육농가의 질병에 해한 이해를 돕고자 몇회에 걸쳐 연재한다.

  • PDF

J2EE Architecture Pattern For The Performance (성능 향상을 위한 J2EE 아키텍처 패턴)

  • Kim, Jeong-Deok;Hong, Sun-Joo;Choi, Sung-Woon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2004.05a
    • /
    • pp.249-252
    • /
    • 2004
  • 컴포넌트 기반 개발은 소프트웨어의 생산성을 높이며 유연성, 확장성, 호환성, 상호운영성 높은 정보시스템을 구축한다. 하지만, 이러한 특성이 성능을 저하시키는 요인이 되기도 한다. J2EE 환경에서 3-tier 컴포넌트 조립방식의 웹 어플리케이션 개발 시 성능 향상을 가져오는 아키텍처 패턴을 제시한다. 또한 그 제시한 아키텍처 패턴을 기반으로 한 구현을 통한 응답시간을 측정해 성능 향상 결과를 제시한다

  • PDF

Establishment of Measurement Standards for Productivity Assessment in Construction Project (건설 프로젝트 생산성 평가를 위한 측정 기준 수립)

  • Kim, Junyoung;Yoon, Inseok;Jung, Minhyuk;Joo, Seonu;Park, Seungeun;Hong, Yeungmin;Cho, Jongwoo;Park, Moonseo
    • Korean Journal of Construction Engineering and Management
    • /
    • v.23 no.3
    • /
    • pp.3-12
    • /
    • 2022
  • In general construction project planning ratio of manpower and quantity of outputs produced, such as the construction estimate standard, is used as the criterion for labor productivity. This method is highly effective in construction projects with repetitive work, however, there is a limit to apply in large-scale projects with high complexity. This is because the influence of non-work time caused by various work interruption factors that act complexly on the productivity of the project is greater than the average labor productivity derived from the performance data of the project. Therefore, this study proposes a productivity measurement method that can evaluate the characteristics of construction works and the cause of non-working time. To this end, first, detailed work processes and their non-work factors for each work type are defined, and the Adv-FMR technique is developed for quantitatively measuring them. Next, based on the concept of obtainable productivity, methods for comparative productivity analysis by work type, evaluating non-work factors, and deriving productivity improvement methods are proposed. Finally, a case study is conducted to validate that the analysis results based on Adv-FMR data can support the decision-making of construction managers on productivity management.

An Approach on Life Cycle Based Efficiency Measurement in Construction Industry (건설 생산의 Life Cycle을 고려한 효율성 측정방안)

  • Jung Soon-Oh;Yoon Su-Won;Chin Sangyoon;Kim Yea-Sang;Park Ji-Hoon
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2004.11a
    • /
    • pp.608-611
    • /
    • 2004
  • Efficiency of the construction process is one of the most important factors to project success. However efficiency is not well defined or measured in construction projects in general. More importantly, efficiency of the construction should be viewed through the life-cycle of the whole production system not in a single phase of the construction process. Therefore, this study defines the concept of efficiency and suggests the efficiency measurement model in construction. As a case study, the suggested model was applied to the curtain wall construction process of the high rise buildings as well.

  • PDF

Strategic uses of the production information in a highly competible market (경쟁시장환경하의 생산정보의 전략적 활용)

  • 김준하;이창호
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1994.04a
    • /
    • pp.678-687
    • /
    • 1994
  • 점차적으로 다양해져 가는 고객의 요구에 따라, 전자산업에 민감한 영향을 받는 엔지니어링 플라스틱 생산체제도 점차 다품종 소량 생산체제로 전화하고 있다. 이에 따라 기업의 내부조직에 있어서 생산성을 우선적으로 고려하는 생산부문과 납기를 우선적으로 고려하는 영업부문과의 생산스케쥴링에 관한 협의 업무가 전체 생산성을 저하시키는 요인으로 작용하고 있다. 본 시스템은 생산스케쥴링을 자동적으로 작성함으로써 영업부문에 스케쥴링 능력을 부여함으로써 생산스케쥴업무를 단일화하여 양 부문간의 협의업무를 간소화하고 생산부문에서는 생산에만 전력할 수 있도록 하여 전체 생산성을 향상시키는 데 그 목적이 있다. 본 시스템의 개발에 있어서 전문가 시스템 개발 tool로는 ART-IM을 사용하였고, GUI는 OSF/Motif로 구현하였다.

근골격계 질환에 대한 접근방향과 대책

  • 이관석
    • Bulletin of the Korean Institute for Industrial Safety
    • /
    • v.3 no.1
    • /
    • pp.1-5
    • /
    • 2003
  • 작업관련 근골격계 질환은 최근 사업장의 집단적인 발병, 산업재해자수의 급증 등으로 인하여 주된 문제가 되고 있다. 특히, 자동차, 선박 등의 제조업에서 이러한 문제는 노사간의 갈등을 야기하는 주 요인으로 작용하여 사회적 이슈로 대두되었다. 이러한 산업재해 율 증가는 근골격계질환의 뇌심 혈관질환 등 작업관련성질환이 주도하고 있는 현상이다. 특히, 단순반복작업, 중량물 취급작업, 부적절한 작업자세 등에 의하여 신체에 과도한 부담을 주었을 때 나타나는 요통, 경견완장해 등 근골격계 질환은 매년 급증하고 있으며 향후에도 지속적인 증가가 예상된다. 이로 인하여 생산성 저하, 근로의욕저하, 품질저하 등으로 경영손실은 물론 직접 의료비의 부담이 커지고 있는 실정이다. 이와 동시에 근골격계 질환에 대한 직원들의 보상과 작업조건 개선에 대한 요구는 점차 증가하고 있고, 가장 중요한 노$.$사간의 쟁점사항으로 부각되고 있다. 정부에서는 근골격계 질환 예방대책으로 '근골격계 부담 작업으고 인한 건강장해예방' 편을 입법화를 하였으며 근골격계 예방팀을 구성하여 대책 마련에 고심 중에 있다.(중략)

  • PDF