• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.05a
• /
• pp.121-124
• /
• 2003

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.971-980
• /
• 2000

Mixed methanotrophs (MM) secreting soluble methane monooxygenase(sMMO) were immobilized on celite R-635 to degrade trichloroethylene(TCE) in methanotrophic consortium biofilm reactor(MCBR) system. Further neutralization of celite R-635 was not needed for immobilization because effluent pH was stabilized at neutral after 4 hour washing. It took 130 days to develop biofilm on celite R-635 and the color of the celite changed gradually from white to red. After biofilm developed, influent methane and oxygen were decreased from 2.5~4 and 8~10 ppm to 0.5~1 and 1~2 ppm, respectively, With influent 2 ppm of TCE and 10 hours of retention time, 79.9% of TCE was degraded in the MCBR system.

• The Microorganisms and Industry
• /
• v.20 no.2
• /
• pp.41-45
• /
• 1994

실관막은 단위부피당 표면적이 커서 상과 상간의 물질전달속도를 증가시킬수 있다는 장점때문에 효소, 미생물, 동식물의 고정화 반응기로써 많은 연구가 진행되어 왔다(1,2). 실관반응기는 이러한 장점이외에도 고정화가 수월하며, 생산물과의 1차분리가 이루어지며, scale-up시 에너지 소모가 적다는 장점을 가지고 있다. 그러나, 불용성 기질을 사용할 경우, 실관막 기공의 막힘으로 인해 장시간의 조업이 어렵고, 고분자 재질 실관막의 경ㅇ, 몇몇 특수 재질을 제외하고 고온/고압 멸균이 불가능하다는 단점을 지니고 있다. 또한 반응기의 구조상 기체의 원할한 공급이 어려우므로 산소소비속도가 빠른 호기성 미생물 배양을 위해서는 이중실관막과 같은 특수설계의 실관 반응기가 이용될 수 있다(3,4). Fig. 1은 독일 Enka사의 polypropylene 실관의 단면과 전형적인 조업방식을 보여준다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.36-38
• /
• 1993

염료제조공정에서 발생되는 폐수는 미반응 물질, 중간합성체, 반응기 세척액 등의 난분해성 물질과 함께 고농도의 염(salt)를 함유하고 있어 기존의 생물학적 처리를 위해서는 폐수를 3-5배 희석하여 처리한다. 따라서 폐수처리장의 규모가 커지고 처리 약품과 에너지의 소모가 증가하므로 처리가 비효율적으로 수행된다. 본 연구에서는 염료폐수처리 및 회수에 역삼투막을 적용하여 폐수의 농축과정에 따른 투과율, 배제율의 변화를 조사하였다. 염료폐수의 생물학적 처리공정에서 문제점으로 대두되는 염의 농도를 낮추기 위해서 Nanofiltration(NF)막을 이용하여 염료성분과 염을 분리하는 실험을 수행하였다.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.450-460
• /
• 2012

In the submerged membrane-coupled sequencing batch reactor (MSBR) with sponge type media, the effect of media on the removal efficiency and filtration performance were investigated. Dosages of the media in the MSBR were set of 5%, 10%, and 20% based on working volume of reactor. As a control system, the MSBR without media was also operated. The experimental results showed that there was also no difference observed in the removal efficiencies of COD, T-N, and T-P irrespective of the dosages of the media. But TMP (transmembrane pressure) of the MSBR with media increased slowly during the operation time, while that of the MSBR without media increased rapidly at the initial operation. This result was thought that the collisions between flat membrane and moving media gave shear forces which decreased the cake layer on the surface of flat type membrane. Consequently, this study showed that filtration performance of the MSBR with media was greatly enhanced compared with that of the MSBR without media. The MSBR with media suggested in this study can be a good candidate for the wastewater treatment.

• Environmental engineer
• /
• s.93
• /
• pp.14-17
• /
• 1994

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.271-273
• /
• 1998

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.311-314
• /
• 2001

• Environmental engineer
• /
• s.92
• /
• pp.14-19
• /
• 1994

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.542-548
• /
• 2005

A fluidized bed reactor containing porous media has been known to be effective for nitrogen and organic matters removal in wastewater. The porous media which attached microbes plays important roles in simultaneous nitrification/denitrification (SND) due to coexistence of oxic, anaerobic and anoxic zone. For SND reaction, oxygen and organic substrates should be effectively diffused from wastewater into the intra-carrier zone. However, the overgrowth heterotrophic microbes at the surface of porous media may restrict from substrates diffusion. From these viewpoints, the existence and effect of heterotrophic bacteria at surface of porous media might be the key point for nitrogen removal. A porous media-membrane hybrid process was found to have improved nitrogen removal efficiency, due to stimulated denitrification as well as nitrification. Microelectrode studies revealed that although intra-media denitrification rate in a conventional fluidized bed was limited by organic carbon, this limitation was reduced in the hybrid process, resulting in the increased denitrification rate from 0.5 to $4.2\; mgNO_3-N/L/hr$.