• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.604-606
• /
• 2024

컴퓨터 비전 응용은 우리 생활에서 중요한 역할을 한다. 현재, 대규모 모델의 등장으로 딥 러닝의 훈련 및 운행 비용이 급격히 상승하고 있다. 자원이 제한된 환경에서는 일부 AI 프로그램을 실행할 수 없게 되므로, 경량화 연구가 필요하다. YOLOv8 은 현재 주요 목표 검출 모델 중 하나이며, 본 논문은 다중 스케일 Ghost 컨볼루션 모듈을 사용하여 구축된 새로운 YOLOv8-pose-msg 키포인트 검출 모델을 제안한다. 다양한 사양에서 새 모델의 매개변수 양은 최소 34% 감소할 수 있으며, 최대 59%까지 감소할 수 있다. 종합적인 검출 성능은 비교적 대규모 데이터셋에서 원래의 수준을 유지할 수 있으며, 소규모 데이터셋에서의 키포인트 검출은 30% 이상 증가할 수 있다. 동시에 최대 25%의 훈련 및 추론 시간을 절약할 수 있다.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2020

Dental hygienists students are required to be able to interact and maintain relationships with dentists and patients. Therefore, the purpose of this study was to identify the relations affecting interpersonal competence of some dental hygiene students, and to provide the necessary data for nurturing competent dental hygienists. The survey was conducted on 293 dental hygiene students in M university. The level of significance was .05 and the statistical program was SPSS win 25.0. As a result of interpersonal competence according to general characteristics and interpersonal characteristics, significant results were found in the degree of human relations and new environmental adaptability. As a result of correlation analysis between subvariables of interpersonal competence, all showed significant positive correlation. Factors affecting interpersonal competence showed significant positive effects on the degree of human relationship(p=.019) and the new environmental adaptability(p=.001). Interpersonal competence are important in the clinic. Therefore, a convergent analysis of the factors influencing is required.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.527-533
• /
• 2016

A new empirical correlation was developed to identify the effect of an inclination angle on pool boiling heat transfer coefficient of a tube submerged in the saturated water at atmospheric pressure. Through the experiments and the survey of published results 431 data points were obtained and the nonlinear least square method was used as a regression technique. The heat flux of the tube($0{\sim}120kW/m^2$), inclination angle($0^{\circ}{\sim}90^{\circ}$), and the length divided by the diameter of a tube(18~42.52) were selected as major parameters. The newly developed correlation well predicts the experimental data within ${\pm}18%$, with some exceptions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.67-73
• /
• 2000

The state assignment for a finite state machine greatly affects the delay, area, and testabilities of the sequential circuits. In order to minimize the dependencies among groups of state variables, therefore possibly to reduce the length and number of feedback cycles, a new state assignment technique based on m-block partition is introduced in this paper. After the completion of proposed state assignment and logic synthesis, partial scan design is performed to choose minimal number of scan flip-flops. Experiment shows drastic improvement in testabilities while preserving low area and delay overhead.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.107-113
• /
• 2017

This paper provides a new approach for modeling of vector quantizer(VQ) followed by analysis and design of subband codecs with imbedded VQ's. We compute the mean squared reconstruction error(MSE) which depend on N the number of entries in each codebook, k the length of each codeword, and on the filter bank(FB) coefficients in subband codecs. We show that the optimum M-band filter bank structure in presence of pdf-optimized vector quantizer can be designed by a suitable choice of equivalent scalar quantizer parameters. Specific design examples have been developed for two different classes of filter banks, paraunitary and the biorthogonal FB and the 2 channel case. These theoretical results are confirmed by Monte Carlo simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.47-54
• /
• 2012

We developed a novel method of fluidic self-assembly to replace the conventional pick-and-place method. This method is cheaper and more effective than the previous method. For this research, we compared mathematical models with experimental results using the parameters of the drag force, the capillary force, and the restoring force for effective chip assembly, and the results for the alignment to the substrate. We obtained a 96.5% attach rate and $5^{\circ}$-misalignment to the substrate in a 500 ${\mu}m$ solder ball.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.244-249
• /
• 2010

The design of error correction code with low complexity has a good attraction for next generation multi-level cell flash memory. Sharing sub-expressions is effective method to reduce complexity and chip size. This paper proposes a new design method of m-bit parallel BCH encoder based on serial linear feedback shift register structure with low complexity using sub-expression. In addition, general algorithm for obtaining the sub-expression is introduced. The sub-expression can be expressed by matrix operation between sub-matrix of generator matrix and sum of two different variables. The number of the sub-expression is restricted by. The obtained sub-expressions can be shared for implementation of different m-parallel BCH encoder. This paper is not focused on solving a problem (delay) induced by numerous fan-out, but complexity reduction, expecially the number of gates.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.523-532
• /
• 2007

This study utilized the 1/25,000 topographic map of the upper area from the Geum-ho watermark located at the middle of Geum-ho river from the National Geographic Information Institute. For the analysis, first, the influence of the size of critical area to the hydro topographic factors was examined changing grid size to $10m{\times}10m,\;30m{\times}30m\;and\;50m{\times}50m$, and the critical area for the formation of a river to $0.01km^2{\sim}0.50km^2$. It is known from the examination result of watershed morphology according to the grid size that the smaller grid size, the better resolution and accuracy. And it is found, from the analysis result of the degree of the river according to the minimum critical area for each grid size, that the grid size does not affect on the degree of the river, and the number of rivers with 2nd and higher degree does not show remarkable difference while there is big difference in the number of 1st degree rivers. From the results above, it is thought that the critical area of $0.15km^2{\sim}0.20km^2$ is appropriate for formation of a river being irrelevant to the grid size in extraction of hydro topographic parameters that are used in the runoff analysis model using topographic maps. Therefore, the GIUH model applied analysis results by use of the river level difference law proposed in this study for the explanation on the outflow response-changing characters according to the decision of a critical value of a minimum level difference river, showed that, since an ogival occurrence time and an ogival flow volume are very significant in a flood occurrence in case of not undertow facilities, the researcher could obtain a good result for the forecast of river outflow when considering a convenient application of the model and an easy acquisition of data, so it's judged that this model is proper as an algorism for the decision of a critical value of a river basin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.809-813
• /
• 2004

강우시 유역 내에서 발생하는 수문특성을 구명하고자 하는 연구는 지속적으로 진행되고 있다. 특히 최근 몇년간 집중호우로 인한 홍수피해가 매우 실각한 수준으로 발생하였고, 이에 지방 소하천을 포함한 전국의 하천정비사업이 새로운 설계홍수빈도를 토대로 진행되고 있다. 우리나라의 강우특성은 여름철에 편중되는 특성을 지니고 있어 홍수시의 홍수방어 대책 등 치수에 많은 어려움이 있는 것이 현실이다. 집중호우로 인한 피해는 전 세계적인 문제로 제기되고 있으며, 이에 강우-유출 관계를 규명하고자 하는 노력이 지속적으로 이루어지고 있다. 강우-유출과정은 시간적, 공간적 다변성을 지닌 수문학적 인자에 의해 좌우되기 때문에 이러한 문제를 해결하기 위해 다년간의 강우-유출 자료를 바탕으로 알고리즘을 생성하고, 이를 바탕으로 정확한 모의가 가능한 수문 모형 및 시스템들을 개발하는데 노력을 기울이고 있다(심순보 등, 1998, 신사철 등, 2002). 그러나 이러한 모형들은 많은 매개변수와 다양한 정보들을 필요로 하게 되어 이들을 처리하는데 많은 어려움이 따른다. 따라서 최근에는 GIS(Geographical Information System)를 활용하여 유역과 분수계를 결정하고 하천형태학적인 특성인자를 추출하는 자동화된 유역정보 추출기술 개발에 대한 관심이 집중되고 있다(Bhaskar, 1992, Francisco, 1995, Yeon, 1999). 이에 본 연구에서는 GIS기법을 이용하여 지형자료로부터 하천연장, 배수면적, 지체시간, 도달시간 등 유역내의 분포형 수문매개변수를 추출하였고 추출된 매개변수를 통해 강우-유출식을 적용하여 분포형 유출량을 산정하는데 활용하고자 한다.ansverse Mercatro) 지구좌표계의 DEM 자료로 변환하였다. 또한 유역의 고도차를 이용한 흐름특성 분석을 위해 수치고도자료를 이용하여 유역흐름특성을 분석할 수 있는 TOPAZ(Topographic PArameteri-Zation) 프로그램을 이용하였다. TOPAZ 프로그램을 통해 분석된 각 격자별 분포형 수문 매개변수는 적합한 관계식을 통해 분포형 유출량을 모의하는데 적용된다.다 정확한 유입량 예측이 가능할 것으로 사료된다.이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유