• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.77-80
• /
• 2003

MEMS(Micro Electro Mechanical System) 기술에서 실리콘 식각기술의 중요성으로 플라즈마 식각기술의 개발이 꾸준히 진행되고 있다. 이중에서 ICP(Inductive Coupled Plasma)는 기존의 증착장치에 유도결합식 플라즈마를 추가로 발생시켜 증착막의 특성을 획기적으로 개선시키는 가장 최근에 개발된 기술이며, 이용에너지를 증가시키지 않고도 이용밀도를 높이고 이용업자들에 방향성을 가할 수 있는 새로운 플라즈마 기술로, 주로 MEMS 제조공정에 응용되고 있다. 본 연구에서는 STS-ICP $ASE^{HR}$을 이용하여 식각과 증착공정을 반복하여 식각을 하는 Bosch 식각에 관하여 연구하였다 STS-ICP $ASE^{HR}$ 장비의 Platen power, Coil power 및 Process pressure에 다양한 변화를 주어 각 변수에 따른 식각속도를 관찰하였다. 각 공정별 변수를 변화시킨 결과 Platen power 12W, Coil power 500W, 식각/Passivation Cycle 6/7sec 일 경우 식각속도는 $1.2{\mu}m$/min 이었고, Sidewall profile은 $90{\pm}0.7^{\circ}$로 나타나 매우 우수한 결과를 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.181-183
• /
• 2002

현재의 인터넷 라우터는 Drop tail 방식으로 큐 안의 패킷을 관리한다. 따라서 네트워크 트래픽의 지수적인 증가로 인해 발생하는 혼잡 상황을 명시적으로 해결 한 수 없다. 이 문제를 해결하기 위해 IETF (Internet Engineering Task Force)에서는 RED(Random Early Detection)알고리즘과 같은 능동적인 큐 관리 알고리즘(AQM: Active Queue Algorithm)을 제시하였다. 하지만 RED 알고리즘은 네트워크 환경에 따른 매개 변수의 설정의 어려움을 가지고 있어 잘못된 매개변수 설정으로 인하여 네트워크 성능을 저하시키는 문제를 발생시키며 전체 망에 불안정한 혼잡제어를 야기 시킨다. 본 논문에서는 기존의 AQM를 개선한 SOQuM(Stabilized Operation of Queue Management) 알고리즘을 제안하였다. 제안한 알고리즘의 성능을 검증하기 위해 기존의 방법과 시뮬레이션을 이용하여 비교하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.858-860
• /
• 2019

본 논문에서 우리는 범함수 회귀모형을 이용한 양파의 성장단계별 무게를 예측할 수 있는 새로운 통계적 추정방법을 제안한다. 여기서 우리는 풍속, 평균온도, 강우량, 일조량 그리고 습도 등 나타내는 환경요인들을 설명변수들로 사용하고, 양파의 성장단계별 무게를 반응변수로 사용하여 범함수 회귀모형을 적용하였다. 먼저 그래프분석과 상관분석을 통하여 우리는 일일 평균온도는 양파의 무게 증진에 가장 큰 양의상관이 있고, 풍속이나 습도 그리고 일조량들은 양파의 성장에 약간의 영향력이 있으며 강우량은 양파의 성장에 전혀 도움이 안됨을 알 수 있었다. 두 번째로 범함수 회귀 분석을 통하여 얻어진 각 환경요인들에 대한 회귀계수들의 그림을 통하여 우리는 양파의 성장 기간 동안에 이들의 무게를 향상시키기 위해서는 어떻게 환경요인들을 관리해야 되는 가를 알 수 있는 재배방법을 유도하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.53-56
• /
• 2020

유사도는 두 객체의 비슷한 정도를 실수로 나타낸 것이며 반대 개념인 다른 정도를 나타내는 것을 거리라 한다. 실세계에서 정확히 같은 것은 존재하기 힘들기 때문에 많은 응용 분야에서 유사도나 거리를 이용한다. 거리 중 대표적인 것으로 유클리드 공간에서 두 점 사이의 직선거리이다. 이 거리를 유클리드 거리라고 한다. 코사인 유사도는 벡터 공간에서 두 벡터 사이각의 코사인 값이다. 이외에도 용도에 따라 다양한 거리 또는 유사도가 연구되고 있다. 수학적으로 유사도는 이변수 함수로 나타낸다. 앞선 연구에서 민코프스키는 맨하탄 거리, 유클리드 거리 등을 매개변수 p를 이용하여 하나의 식으로 통합하였다. 이러한 유사도 통합은 유사도에 대한 새로운 통찰력을 제공하고 또 다른 응용을 제공한다. 본 논문은 기존 유사도의 의미를 개관하고 추가적인 매개변수를 도입하여 민코프스키 거리와 코사인 유사도를 통합한 식을 제시한다.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.253-262
• /
• 2016

A Rating curve is a regression equation of discharge versus stage for a given point on a stream where the stream discharge is measured across the stream channel with a stage and discharge measurement. The curve is generally used to calculate discharge based on the stage. However, the existing approach showed problems in terms of estimating uncertainty associated with regression parameters including the separation parameter for low and high flow. In this regard, this study aimed to develop a new method for the aforementioned problems based on Bayesian approach, which can better estimate the parameter and its uncertainty. In addition, this study used a Bayesian Multi-Segmented (Bayesian M-S) model which is provided a comparison between the existing and proposed scheme. The proposed model showed better results for the parameter estimation than the existing approach, and provided better performance in terms of estimating uncertainty range.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.506-512
• /
• 2006

Gastrodia elata Blume (GEB) is a traditional herbal plant that has been used in Asian countries for centuries as an anticonvulsant analgesic, and a sedative for treating general paralysis, epilepsy, vertigo, and tetanus. This study was designed to optimize conditions for ethanol extracts or GEB by analyzing and monitoring the extraction characteristics with response surface methodology. The extract was used for analysis of the effective components of GEB. The estimated optimal conditions were 63.62% in ethanol of 5.06 mL/g in solvent per sample, and 6.25 hr in extract time. The optimal extraction conditions for $ \gamma-aminobutyric$ acid, were 45.52%, 5.67 mL/g, and 6.04 hr, while those for $\rho-hydroxybenzyl$ alcohol were 62.73%, 5.02 mL/g, and 5.95 hr. Regression equation was generated for each variables and then superimposed them, such as soluble solid, $ \gamma-aminobutyric$ acid and $\rho-hydroxybenzyl$ alcohol content thereby resulting in superimposed values of extinction conditions like $45\sim65%,\;5\sim7mL/g$ and $5\sim7$ hr, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.689-697
• /
• 2017

As a fundamental study to apply the new flocculation method using ballast in water treatment process, the optimal conditions for general and ballast coagulant dosage, and pH, which are known to have a significant influence, were derived by response surface methodology. Poly aluminum chloride (PAC) and magnetite ballast were used as a general coagulant and ballast, respectively. Coagulation experiments were performed by jar-tester using the kaolin based synthetic water. The effects of three independent variables (pH, PAC, and ballast) on response variables (turbidity removal rate and average settling velocity of flocs) and the optimum condition of independent variables to induce the optimum flocculation were obtained by 17 experimental conditions designed by Box-Behnken procedure. After performing experiments, the quadratic regression model was derived for each of response variables, and the response surface analysis was conducted to explore the correlation between independent variables and response variables. The $R^2$ values for the turbidity removal rate and the average settling velocity were 0.9909 and 0.8295, respectively. The optimal conditions of independent variables were 7.4 of pH, 38 mg/L of PAC and 1,000 mg/L of ballast. Under these conditions, the turbidity removal rate was more than 97% and the average settling velocity exceeded 35 m/h.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.69-75
• /
• 2001

Photoimageable thick film technology is a new technology in that the lithography process such as exposure and development is applied to the conventional thick film process. Line resolution of 25 $\mu\textrm{m}$ width and 25 $\mu\textrm{m}$ space could be obtained by laminating green sheet, printing photoimageable Ag paste, exposing the test patterns, developing, and co-firing. In case of using the alumina substrate, 20 $\mu\textrm{m}$ fine line could be also obtained by similar process. Test results showed that exposing power density and developing time were the most important processing parameters for the fine line formation. Microstrip and series gap resonators with well-defined line morphology and good transmission characteristics in high frequency were formed by this new technology, and thereby dielectric constant and loss of test substrate were calculated.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.100-106
• /
• 2003

An on-line frontal analysis HPLC system was developed to determine the unbound concentration of (S)-perillyl alcohol, an potential anti-cancer agent, in human serum albumin (HSA) solution, The analysis was performed on a Develosil 100 Diol 5 (10 cm x 4.6 mm I.D.) high-performance frontal analysis (HPFA) column. Sodium phosphate solution was used as the mobile phase (pH 7.4, ionic strength 0.17) at a flow rate of 1 $m\ell$/min. UV wavelength was set at 205 nm. A injection volume of 600${mu}ell$ was chosen to ensure the compound eluted formed a zonal peak with a plateau. By Scatchard analysis, it was found that the binding constant(K) and binding number(n) of (S)-perillyl alcohol to molecular HSA were 2.05 x $10^6$ [$M{-1}$], 0.00428, respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.4
• /
• pp.49-54
• /
• 2000

A new functional organic thin film optical waveguide ion sensor is designed, which can select a specific ion, i.e., $Ca^{2+}$ -ion. The sensing membrane was composed of PVC-PVAC-PVA copolymer matrix based on anionic cation-selective chromoionophor(ETH5294), neutral ionophore(K23El), anionic site and plasticizer and it was coated on the etched glass substrate as embeded type optical waveguide itself. The sensor sensitivity dependence on waveguide length and thickness, contence of chromoionophore, and each mode was investigated. And this sensor could detect $Ca^{2+}$ ion in concentrations ranging from 1$\times$10­6~1M(with 0.05M tris-HCI buffer solution of pH7.4) by measuring the absorbance change at 514nm of light. Utilizing thin film membrane, the fast response time and high sensitivity are obtained. Also, it is expected that this sensor can be applied to various biochemical important ions.ons.