• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.18-18
• /
• 1998

평판에 충돌하는 초음속 세트에 관한 연구는 수직/단거리 이·착륙기의 발진, 미사일 발사시스템, 다단계 로켓 분리 등 실제적인 분야에 응용되고 있으며 고온의 충돌제트와 화염에 의한 가열문제와 관련된 산입분야에서도 많은 연구가 이루어지고 있다. 과소팽창하는 초음속 제트가 평판에 충돌할 때 Barrel shock, exhaust gas boundary, Mach disk, contact surface, reflected shock, plate shock, stagnation bubble 등 매우 복잡한 유동 구조가 표면에 나타나는데 이것은 평판으로부터 반사된 shock과 free jet의 충격파 구조 사이에서의 상호간섭 때문이다. 노즐로부터 방출되는 고속, 고온가스가 주변 장비 등에 부딪힐 때 발생하는 이러한 복잡한 간섭현상의 연구는 관련 주변장비 설계 및 상황예측에 필수적인 자료를 제공하며 이해를 도와준다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.350-352
• /
• 2003

일반적인 접근제어 모델이 메커니즘 내에 보안 정책을 미리 설계함에 따라 보안 요구사항의 추가나 변경에 어려움이 있는 반면에, 다중 접근제어 정책 모델은 기업 환경에 필요한 다양한 보안 정책들을 융통성 있게 지원하기 위해, 권한 명세 언어를 기반으로 positive/negative 권한을 모두 표현할 뿐만 아니라, 권한의 예외적 수행, 권한의 전파와 충돌 해결 정책 등을 구현함으로써, 접근제어의 권한 적용에 유연성을 강화하였다. 그러나, 기존의 권한 전파 및 충돌 해결 정책은 권한 전파의 모든 가능한 path를 고려하지 않거나, 충돌 문제를 해결하지 않는 부분이 있는데, 이것은 특히 서로 다른 정책의 어플리케이션 통합 환경에서 권한의 남용이나 상실 등 의도하지 않은 부당한 권한의 실행을 야기시킨다. 따라서, 본 논문에서는 다수의 정책의 영향을 받은 주체에 대해서 권한의 독립적 수행을 보장하면서, 추가적인 충돌 상황을 발생시키기 않는 권한 전파 정책을 제안한다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.231-233
• /
• 2008

본 논문에서는 IEEE 802.11 WLAN의 MAC인 DCF의 성능을 개선하는 알고리즘을 제안하고 이를 시뮬레이션으로 분석한다. IEEE 802.11 WLAN의 MAC에서는 데이터 전송을 제어하기 위한 방법으로 DCF와 PCF를 사용하며, DCF의 경우 CSMA/CA를 기반으로 한다. CSMA/CA는 스테이션간의 충돌을 줄이기 위해서 임의의 Backoff time을 각 스테이션의 CW(Contention Window) 범위에서 결정한다. 스테이션은 패킷 전송 후 충돌이 발생하면, 윈도우 크기를 두 배로 증가시키며, 패킷을 성공적으로 전송하면 윈도우 크기를 최소 CW로 감소한다. DCF는 경쟁 스테이션이 적은 상황에서는 비교적 우수한 성능을 보이나 경쟁 스테이션의 수가 많은 경우 처리율, 지연 관점에서 성능이 저하되는 문제점이 있다. 본 논문에서는 패킷 전송 후 충돌이 발생하면 윈도우 값을 최대 CW로 증가시키고 패킷의 정상적인 전송 후에는 윈도우 값을 서서히 감소함으로써 현재 WLAN의 망 상태정보를 계속 활용함으로써 패킷 충돌 확률을 낮추는 알고리즘을 제안한다. 제안하는 알고리즘의 효율성을 입증하기 위해 시뮬레이션을 수행하여 그 타당성을 제시하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.178-180
• /
• 2022

선박충돌사고를 재현하고 분석하기 위해서는 레이더 기반 선박충돌사고 데이터에서 물표 정보를 정확하게 확보하는 것이 매우 중요한 역할을 한다. 이 연구에서는 HSV 색공간과 OpenCV 라이브러리를 이용하여 물표 정보를 추출하는 방법을 분석하였고, 실제 상황에 적용한 프로그램도 개발하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2013

Crashworthy fuel cells have a great influence on improving the survivability of crews. Since 1960's, the US army has developed a detailed military specification, MIL-DTL-27422, defining the performance requirements for rotorcraft fuel cells. In the qualification tests required by MIL-DTL-27422, the crash impact test should be conducted to verify the crashworthiness of fuel cell. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. Because the crash impact test itself takes a long-term preparation efforts together with costly fuel cell specimens, the failure of crash impact test can result in serious delay of a entire rotorcraft development. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error with full-scale fuel cells. Present study performs the numerical simulation using SPH(smoothed particle hydro-dynamic) method supported by a crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the resulting equivalent stresses of fuel cell itself are calculated and vulnerable areas are also evaluated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.293-298
• /
• 2015

The vessel encounter data collected from the vessel trajectories in the maritime traffic situation is possible to analyze vessel collision and near-collision risk using statistical method. In this study, analyzing variables extracted from the vessel encounter data using factor analysis, we determine main factors effecting vessel collision risk from vessel encounter data. In order to calculate each factor, it used principal component analysis for factor analysis after normalization and standardization of vessel encounter variables. As a result of the factor analysis, main effect factors are summarized into the vessel approach factor and collision avoidance variance factor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5442-5447
• /
• 2013

This paper focuses on development of SCAAM(Ship Collision Avoidance Assignment Model) for avoiding ship collison at sea. We take a new look at DCPA, TCPA, VCD, collision concept for ship collision avoidance and propose SCAAM using DCPA pre-assignmented by a ship master on information collected by other ship's AIS, GPS (course-speed, destination, length, width, tonnage etc). If A ship is a collision situation, the ship master makes a decision where the ship makes a evasion voyage or not continually using SCCAM. If ship master decides a evasion voyage, the ship is voyaged by CORLEGS (International Regulations for Preventing Collisions at Sea). This paper contributes to safety navigation by decreasing the ship collision accident by human's error.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.73-80
• /
• 2004

Recently, many maritime accidents have been increased and the collisions due to human error are given a great deal of proportions out if them We develop the Real-time Collision Risk Monitoring System (CRMS) for the navigational officers to cope with the emergency situation promptly and thus to reduce the probability if casualty. In this study, the risk of collision is evaluated by two kinds if method. The first method is based on Fuzzy algorithm, which evaluates the risk of collision between traffic ships. The second method is based on Environmental Stress (ES) Model, where the total risk if collision is evaluated by the environmental stress felt by human. The developed real-time CRMS has been installed to the ship handling simulator system and its capabilities have been tested through simulator experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.33-43
• /
• 2013

This paper proposes a distributed MAC protocol called Carrier Sensing Multiple Access with Collision Resolution (CSMA/CR) considering fully-connected single hop network environments for next-generation wireless LAN with high density of stations. The proposed CSMA/CR is compatible with the conventional MAC protocols by observing the operation of CSMA/CA and is able to detect a collision promptly without RTS/CTS exchange by applying the technique of CSMA/CD to wireless environments. Moreover, once a collision is detected, the dedicated resource is allocated to the next transmission and so the collision that may occur again is resolved. We investigate some implementation issues for the practicality of CSMA/CR and compare it with the typical distributed MAC protocols. The simulation results show that the proposed CSMA/CR has a low overhead as detecting a collision without the RTS/CTS exploitation and achieves always the best throughput regardless of the number of access stations, by using the reservation-based collision resolution technique.