• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.591-603
• /
• 2022

The color and optical properties of seawater are determined by the interaction between dissolved organic and inorganic substances and plankton contained in it. The Ieodo - Ocean Research Institute (I-ORS), located in the East China Sea, is affected by the low salinity of the Yangtze River in the west and the Tsushima Warm Current in the south. Thus, it is a suitable site for analyzing the fluctuations in circulation and optical properties around the Korean Peninsula. In this study, seawater surrounding the I-ORS was classified according to its optical characteristics using the satellite remote reflectance observed with Moderate Resolution Imaging Spectroradiometer (MODIS)/Aqua and National Aeronautics and Space Administration (NASA) bio-Optical Marine Algorithm Dataset (NOMAD) from January 2016 to December 2020. Additionally, the variation characteristics of optical water types (OWTs) from different seasons were presented. A total of 59,532 satellite match-up data (d ≤ 10 km) collected from seawater surrounding the I-ORS were classified into 23 types using the spectral angle mapper. The OWTs appearing in relatively clear waters surrounding the I-ORS were observed to be greater than 50% of the total. The maximum OWTs frequency in summer and winter was opposite according to season. In particular, the OWTs corresponding to optically clear seawater were primarily present in the summer. However, the same OWTs were lower than overall 1% rate in winter. Considering the OWTs fluctuations in the East China Sea, the I-ORS is inferred to be located in the transition zone of seawater. This study contributes in understanding the optical characteristics of seawater and improving the accuracy of satellite ocean color variables.

• Journal of The Korean Association For Science Education
• /
• v.42 no.1
• /
• pp.77-96
• /
• 2022

This study investigated how collaborative reflection between novice secondary science teachers promoted the development of teaching professionalism. We intentionally selected research participants who shared sufficient rapport. Data were collected by videotaping the classes taught by participants, pre-talk, post-interviews and nine collaborative reflection processes. All data were transcribed and analyzed. Results indicated that all three teachers showed changes in teaching practice. Minyoung's practice involved a teacher-led lecture, but through collaborative reflection, she could create a learning environment to enhance students' power and ownership in her class. Emphasizing academic rigor, Soyoung used to teach content outside the scope of the curriculum, but through collaborative reflection, she became more considerate of students' understanding. Finally, in Jiyeon's classes inquiry activities and theoretical explanations were separated from each other. However, she repeated her efforts to improve her class after collaborative reflection, allowing students to construct explanations through activities. In this study, three factors that promoted the development of teachers' pedagogical content knowledge through collaborative reflection were identified. First, the different teaching orientations of the three teachers who participated in this study, promoted sharing of opinions through collaborative reflection. Second, reflection based on teaching practice enabled practical feedback on the class, which enhanced the development of teachers' pedagogical content knowledge. Third, the equal status and formation of rapport between the three teachers created an environment for productive reflection. These results suggest that future teacher education programs should target communities that can promote collaborative reflection based on teachers' teaching practice.

• Journal of Technology Innovation
• /
• v.31 no.2
• /
• pp.303-332
• /
• 2023

This study comprises critical questions of "What kinds of intangible resources are significant to create and reinforce competitive advantages for the small and medium-sized enterprises(SMEs) that significantly influence the national economy? What kinds of capacities do SMEs need in consideration with the large changes in market environment and during crisis? With large changes to market environment, would different capacities affect performance of platform and general SMEs?" To examine these questions, I have provided Entrepreneurial Orientation, Absorptive Capacity, and Organizational Resilience as key capacities that influence the competitive advantage and performance of SMEs. In particular, I have substantiated the control effect of Organizational Resilience (a rising key capacity for enterprises in recent times) on Corporate Performance. Moreover, I have analyzed the control effect of Organizational Resilience on Corporate Performance by comparing platform and general companies, and also substantiated how control effects may vary depending on sub-factors of Organizational Resilience. The results of this study indicate that Entrepreneurial Orientation and Absorptive Capacity significantly and positively influence Corporate Performance. Organizational Resilience also demonstrate a positive influence on Corporate Performance. Notably, sub-factors of Organizational Resilience (risk preparation capacity, risk response capacity, and change initiative capacity) significantly control correlation between Entrepreneurial Orientation and Corporate Performance. Risk preparation capacity and change initiative capacity significantly control correlation between Absorptive Capacity and Corporate Performance. Additionally, the control effect of risk preparation capacity significantly control correlation between Entrepreneurial Orientation and Corporate Performance. Also, the control effect of risk response capacity correlations between Entrepreneurial Orientation and Corporate Performance demonstrated themselves significantly only in platform enterprises. The study's results indicate that Organizational Resilience not only directly influence Corporate Performance, but also strengthens Corporate Performance via mutual interaction with Entrepreneurial Orientation and Absorptive Capacity, although the control effect of Organizational Resilience may vary between platform enterprises and general enterprises. I expect such results to provide practical value to the management of small and medium-sized enterprises (SMEs).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.70-79
• /
• 2002

This study was conducted to determine correlations and combining abilities of leaf lengths, leaf widths, petiole lengths, number of branches, number of leaves, leaf areas, fresh weights, dry weights and number of flowers in F₁ crosses made with the partial seven-parent diallel cross in Viola tricolor. Leaf lengths and leaf widths showed highly positive correlation with petiole length and negative correlation with number of branches, number of leaves and number of flowers. There was positive correlation between the number of leaves and flowers as well as between leaf area and fresh weight. Mean squares of general combining ability(GCA) and specific combining ability(SCA) were highly significant for all the parameters. Variance component values of SCA were greater than those of GCA for all the parameters except leaf length, implying preponderance of non-additive gene actions for these characters. The lines C and G for leaf lengths and widths, the lines A and F for number of leaves, the lines A, B and G for leaf areas, and the lines B and F for number of flowers showed relatively high GCA effects. The crosses of A×B and B×D exhibited high SCA effects on increasing leaf lengths, leaf widths, number of leaves, fresh weights and number of flowers. And also the crosses of B×E and D×G exhibited high SCA effects on decreasing leaf lengths, leaf areas and fresh weights as well as increasing number of flowers. The broad sense heritabilities of most characters were high compared with the narrow sense one. Those of leaf length, leaf width, petiole length and number of leaves were high in both the broad and narrow sense heritabilities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.32-39
• /
• 1981

In order to study the genetic system of the blast resistant varieties, the conidial suspension of mutant races of T-2$^{+t}$, N-2$^{+t}$, C-8$^{+t}$ was inoculated at 4-5 leaf stage by injector for F_2 seedlings from the crosses between seven resistant varieties and four maker lines easily detectable at seedling stage. The results are summarized as follows; 1. The fertility of cross between Semi-dwaf testers and Indica resistant varieties except Carreon was about 74 percents. 2. The segregation modes of resistance varied with varieties and blast races. However, the resistance was expressed as dominance in all cases. Tetep, Tadukan and Carreon showed more complicated segregation for resistance than that of the bred lines. 3. For blast races used, four segregation ratios such as 3:1, 9:7, 13:3 and 37:27 were found in the Tatukan, Tetep, and IR747, and three segregation ratios such as 3:1, 13:3 and 15:1 in the Carreon, and two segregation ratios of 3:1 and 13:3 with Suweon 287, Suweon 288, and Iri342. 4. In the segregation of the resistance to the each races, the ratios of 3:1, 13:3, 15:1 were fitted to T-2$^{+t}$, and the ratios of 3:1, 13:3, 9:7 and 37:27 to N-2$^{+t}$ and C-8$^{+t}$. 5. Suweon 287, Suweon 288 and Iri342 carried one simple dominant gene and inhibitor gene was considered in some cross combinations. Meanwhile Tadukan, Tetep and IR747 seemed to carry one to three resistant genes, and in some cross combinations, the expression of these genes were simple dominant, inhibiting, duplicating and complimentary action. 6. Resistance genes to blast races, T-2$^{+t}$, N-2$^{+t}$ and C-8$^{+t}$ in the Tadukan, Tetep, Carreon, Suweon 287, Suweon 288 and Iri342 were found to be independent with the linkage group of II(lg), VIII(la), XI(bc), and XII(gl).bc), and XII(gl).

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.146-160
• /
• 2023

The spread of non-face-to-face services due to the COVID-19 pandemic has brought many changes in consumers' purchasing behavior and attracted much attention to new services. Could trying new services caused by this sudden environmental change alter consumers's choice patterns? This study proposes the research question of whether these new service experiences can change consumers' existing choice behavior, especially for risk-averse consumers who maintain their existing choice behavior or prefer safe alternatives. In this study, we examined whether trying out an unmanned payment services, one of innovative services that emerged after the pandemic crisis, can change the existing choice behavior of risk-averse consumers, i.e., make them more likely to prefer risky alternatives to safe alternatives. To accomplish these research goals, this research conducted one pilot survey and one study. The results of pilot survey showed that the stronger the prevention-focus tendency, the lower the self-efficacy to use the innovative service, with a negative relationship between them. Based on these findings, the study used an experimental method to examine the interaction effects between the use of innovation services and consumers' regulatory focus in a choice behavior and to explore the psychological mechanisms behind them. According to the results, it is found that prevention-focused consumers were more likely to choose risky alternatives and dissimilar extended brands following a trial of an unmanned payment service compared to not using that service. In contrast, promotion-focused consumers did not show different choice patterns regardless of following a trial of an innovative service. Furthermore, these results for prevention-focused consumers confirm the role of self-efficacy as a psychological mechanism. These findings shed light on the role of self-efficacy which has discussed in positive psychology into marketing area. Moreover, practical and academic implications are suggested by the finding that behavioral change occurs in risk-averse consumers, who are known to be hesitant to try new behaviors, indicating market expansion related to potential consumers for the use of the innovation services.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.4
• /
• pp.91-103
• /
• 2009

Slope failure depends upon the climatic features related to related rainfall, structural geology and geomorphological features as well as the variation of the mechanical behaviors of soil constituting a slope. In this paper, among many variables, effects of soil layer thickness on the slope failure process, and variations of matric suction and volumetric water content were observed. When the soil layer is relatively thick, the descending wetting front decreases matric suction and the observed matric suction reaches to "0" value. When the wetting front reaches to the impermeable boundary, the bottom surface of steel soil box, ascending wetting front was observed. This observation can be postulated to be the effects of various sizes of pores. When macro size pores exist, the capillary effects can be reduced and infilling of pore will be limited. The partially filled pores would be filled with water during the ascending of the wetting front, which bounces from the impermeable boundary. This assumption has been assured from the observation of variation of the volumetric water contents at different depth. When the soil layer is thick (thickness = 20 cm), for granular material, erosion is a cause triggering the slope failure. It has been found that the initiation of erosion occurs when the top soil is fully saturated. Meanwhile, when the soil layer is shallow (thickness = 10 cm), slope slides as en mass. The slope failure for this condition occurs when the wetting front reaches to the interface between the soil layer and steel soil box. As the wetting front approaches to the bottom of soil layer, reduction of shear resistance along the boundary and increase of the unit weight due to the infiltration occur and these produce complex effects on the slope failure processes.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.101-114
• /
• 2008

Pressurized grouting is a common technique in geotechnical engineering applications to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressurized grouting has been applied to a soil-nailing system which is widely used to improve slope stability. Because interaction between pressurized grouting paste and adjacent ground mass is complicated and difficult to analyze, the soil-nailing design has been empirically performed in most geotechnical applications. The purpose of this study is to analyze the ground behavior induced by pressurized grouting paste with the aid of laboratory model tests. The laboratory tests are carried out for four kinds of granitic residual soils. When injecting pressure is applied to grout, the pressure measured in the adjacent ground initially increases for a while, which behaves in the way of the membrane model. With the lapse of time, the pressure in the adjacent ground decreases down to a value of residual stress because a portion of water in the grouting paste seeps into the adjacent ground. The seepage can be indicated by the fact that the ratio of water/cement in the grouting paste has decreased from a initial value of 50% to around 30% during the test. The reduction of the W/C ratio should cause to harden the grouting paste and increase the stiffness of it, which restricts the rebound of out-moved ground into the original position, and thus increase the in-situ stress by approximately 20% of the injecting pressures. The measured radial deformation of the ground under pressure is in good agreement with the expansion of a cylindrical cavity estimated by the cavity expansion theory. In-situ test revealed that the pullout resistance of a soil nailing with pressurized grouting is about 36% larger than that with regular grouting, caused by grout radius increase, residual stress effect, and/or roughness increase.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.343-363
• /
• 2023

Sulawesi island, as a global producer of nickel resources, is leading the rapid growth of nickel industry of Indonesia. Nickel laterite deposits in Sulawesi was formed by lateritization of the world-scale East Sulawesi Ophiolite (ESO) under the active tectonic setting and tropical rainforest climate. In this paper, exploration cases for nickel laterite deposits in five regions of Sulawesi are reported. Regional characteristics on nickel laterite deposits in Sulawesi are understood based on various exploration activities such as outcrop, trench and pit survey, petrological observation, geochemical analysis, and interpretation of drilling data, etc.. In the northeastern part of 'Southeast-Arm', which is a strategic location for nickel industry of Indonesia, ESO is extensively exposed to the surface. In the Morombo and Morowali regions, typical high-grade saprolite-type orebodies with a thickness of 10 to 20 m occur. The cases showed that topographic relief tends to regulate Ni-grade distribution and orebody thickness, and that high grade intervals tend to occur in places where joints and garnierite veins are dense. In the Tinanggea and South Palangga regions in the southern part of the Southeast-Arm, overburden composed of Neogene to Quaternary deposits is a major factor affecting the preservation and profitability of nickel laterite deposits. Despite the overburden, high-grade saprolite-type orebodies composed of Ni-bearing serpentine with garnierite veins occur in a thickness of around 10 m to secure economic feasibility. In contrast, in the Ampana region in the northern part of 'East-Arm', low-grade nickel laterite deposits with immature laterite profile was identified, which is thought to be the result of active denudation due to tectonic uplift. Exploration cases in this paper will help to understand characteristics and controlling factors on nickel laterite deposits in Sulawesi, Indonesia.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.369-380
• /
• 2023

Developing and breeding improved legume-based food resources require collecting useful genetic traits with heritability even though requiring some time-consuming, costly, and labor intensive. We attempted to infer heritability of nine genetic traits-days to flowering, days to maturity, period from flowering to maturity, the number of seeds per pod, 100-seeds weight, and four contents such as crude protein, crude oil, crude fiber, and dietary fiber-using 455 homologous chloroplast gene sets of six species of legumes. Correlation analysis between genetic trait differences and phylogenetic distance of homologous gene sets revealed that days to flowering, the number of seeds per pod, and crude oil content were influenced by genetic factors rather than environmental factors by 62.86%, 69.45%, 57.14% of correlated genes (P-value ≤ 0.05) and days to maturity showed intermediate genetic effects by 62.42% (P-value ≤ 0.1). The period from flowering to maturity and 100-seeds weight showed different results compared to those of some previous studies, which may be attributed to highly complicated internal (epistatic or additive gene effects) and external effects (cultural environment and human behaviors). Despite being slightly unexpected, our results and method can widely contribute to analyze heritability by including genetic information on mitochondria, nuclear genome, and single nucleotide polymorphisms.