• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.21-26
• /
• 1995

In this paper integral equations are derived and simulated numerically for the mutual radiation impedance of an acoustic transducer in a Plane array. It is assumed that the pistons are mounted in the rigid infinite baffle. The mutual radiation impedance is separated into resistance and reactance and plotted as a function of ka and kd. Mutual radiation resistance is decreased and perturbed according to increase of ka. Mutual radiation reactance is decreased along to increase of ka. Mutual impedance is decreased when kd is increased. However, when ka is 6, 13, and 19 the interaction effect is decayed. When the relative piston position of the two pistons is 45 degree, the amount of interaction becomes minimized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.194-199
• /
• 1996

평면 배열형 소나 센서에서는 트랜스듀서 상호간의 간섭효과들이 음을 방사하는 각각의 트랜스듀서 및 평면 배열의 빔패턴에 영향을 주게된다. 따라서 음향 방사출력의 계산은 소나용 트랜스듀서의 성능및 효율을 평가하는데 필수적이다. 음향 방사출력을 예측하기 위하여 무한 강성 배플에 고정된 수개의 트랜스듀서를 이론해석의 대상으로 설정하였다. 각 트랜스듀서는 자기방사 임피던스 및 상호방사 임피던스로 구성되어 있으며 이것의 총 방사 임피던스 및 음향반사 출력의 추출은 등가 전기회로 모델을 이용하였다. 이론및 수치해석의 결과에 근거하여 음향방사 출력은 각 트랜스듀서 상호간의 간섭의 양에 의존함을 보였으며 상호간섭에 의한 음향출력 손실은 25.05%에서 최고 51.52%정도임을 확인하였다.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.297-303
• /
• 1996

The general approach using sine series expansions was represented to evaluate the radiation loading from a vibrating surface on a simply supported cylinder. In this paper, the fluid-loading coefficients (radiation impedance) for a submerged finite cylindrical shell with an arbitrary end condition are defined and evaluated. The vibrations of cylindrical shell are expressed by using cosine series expansions to analyze the radiation impedance for a finite cylindrical shell. It is possible to represent the displacements at both ends of cylindrical shell in comparison with sine series. The direct and cross modal components of fluid-loading coefficients are shown and the validity of cosine series expansions are verified from the results of numerical computations. This approach and results are directly applicable in the analysis of sound radiation from subemerged finite cylindrical shell with arbitrary end conditions.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.461-462
• /
• 2020

본 논문은 LCL 필터를 사용하는 계통연계형 인버터의 병렬운전 조건에서 LCL 필터와 계통 임피던스 간의 상호간섭에 따른 공진특성을 분석하였으며, 시뮬레이션 및 실험을 통해 검증하였다. 인버터 병렬운전은 2대 조건을 고려하였으며, LCL 필터를 포함한 시스템 파라미터는 동일 조건으로 설정하였다. PCC 지점에 인버터 병렬운전 조건 시, 계통 임피던스 존재로 인해 각 인버터의 LCL 필터 간 상호간섭 영향이 발생하며 필터 공진주파수의 이동은 인버터 병렬연결 수와 계통 임피던스 크기와의 연관성을 분석하였다. PSIM을 통해 시뮬레이션하고, MATLAB/SIMULINK 2018a를 통해 검증한다. 실시간 디지털 시뮬레이터와 DSP 28377 제어보드 연동을 통해 2대 인버터 병렬운전 조건에서의 상호간섭 특성을 실험하였으며, 분석결과와 동일한 실험결과를 도출함으로써 해석의 타당성을 검증하였다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.1069-1074
• /
• 2003

For beam forming method is equaled detection performance of water weapons system, the best beam plan is very important in it. This study showss that the plan software considered radiation, or mutual radiation impedance. This software calculated effect of mutual radiation impedance by sensor array form, it is planed that one of the press paramater in the beam plan.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.115-119
• /
• 2017

Intermodulation distortion degrades the S/N(signal-to-noise) of the original signal and also affects the adjacent channels. Intermodulation distortion is mainly caused by the nonlinear characteristics of the power amplifier. If the power amplifier with nonlinear characteristics has a memory effect, the intermodulation distortions occurred in the power amplifier are generated in various and complex forms. The predistorter is used as a way to improve intermodulation distortions. In order to efficiently utilize the performance of the predistorter, the memory effect of the power amplifier must be reduced. In this paper, we describe the design method of bias circuit to reduce the memory effect in power amplifiers. To reduce the memory effect, the bias circuit must have a high impedance for the signal and a low impedance for the envelope(modulating signal) and the second harmonic component of the signal. To verify the performance of the bias circuit designed considering the memory effect, a power amplifier operating at 170 ~ 220MHz was designed and implemented. The designed bias circuit has a large impedance in the operating frequency band and low impedance in the envelope signal and the second harmonic of the signal. As a result of the performance measurement, it was found that the asymmetric intermodulation distortion component is improved by 3.7dB.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1570-1571
• /
• 2011

인접한 독립 접지전극에 접지전류가 인가된 경우 접지전극 상호간 전위간섭을 일으키게 된다. 상용주파수 접지전류에 대한 전위간섭은 많은 분석이 이루어 졌으나, 뇌서지와 같은 고주파수를 포함하는 접지전류에 대한 전위간섭의 분석은 충분히 수행되지 못하였다. 본 논문에서는 상호간 영향을 줄 수 있는 길이 4 m인 수직 접지전극을 대상으로 주파수에 따른 전위간섭의 영향을 분석하였으며, 수직 접지전극의 주변에 나타나는 대지표면전위와 함께 상호 비교 분석하였다. 그 결과, 전위간섭은 접지임피던스의 변화에 의존하는 경향성을 나타내었으며, 수직 접지전극 길이의 1.5배에 해당하는 이격거리에서 접지전극의 전위와 대지표면전위가 거의 일치하는 것으로 나타났다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.663-671
• /
• 1999

The linearity of the GaAs FET power amplifier(PA) is greatly influenced by source and load impedance for the FETs. The third order intermodulation products, IM3, from the GaAs FET PA are investigated in relation with source and load impedance. From heuristic as well as analytic point of view, e.g., Volterra series analysis, is employed to analyze the effects of nonlinear circuit elements, gate-source capacitance, $C_{gs}$, and drain-source current, $I_{ds}$. The sweet spots where soure and load impedance produce the least intermodulation products are calculated and compared with the load and source pull data with good agreements. It also shows that source impedance has a greater effect on the intermodulation products than the load impedcnce.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.429-432
• /
• 2009

본 논문에서는 현수교에 대하여 지반-구조물 상호작용을 고려한 해석을 수행하였다. 교량의 앵커리지와 기초를 부분구조법(Structure method)을 이용한 지반-구조물 상호작용(Soil-Structure Interaction) 해석프로그램 SASSI를 이용하여 구조물 저면에서의 지반 임피던스(Impedance)를 계산하고 이로부터 앵커리지 및 기초와 지반에 대응하는 강성, 질량, 그리고 감쇠를 가지는 집중 파라메터 모델을 구하였다. 그리고 현수교 유한요소 모델에 앵커리지 및 기초와 지반에 대한 집중 파라메터 모델을 연계하여 전체 교량에 대한 지반-구조물 시스템을 구성하고 시간영역에서의 지반 운동에 대한 동적해석을 수행하였다. 해석결과를 지반-구조물 상호작용을 고려하지 않은 경우와 고려한 경우를 비교하였고 파동전달효과를 고려한 경우와 고려하지 않은 경우를 비교함으로써 지반-구조물 상호작용의 영향을 살펴보았다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.315-324
• /
• 2004

In eddy current testing(ECT), differential probes have been frequently used since they .an reduce the number of parameters that influence ECT signals. However, differential signal is actually the difference of the two coils' impedance so that signal prediction and interpretation are not easy, On the other hand, absolute coil signal is rather straightforward to predict and analyze. Therefore, combined use of the two types of signals would increase the test reliability. In this paper, absolute coil signals from Inconel plate and tubes are predicted by the finite element analysis and efforts of lift-off, fill-factor, conductivity, operating frequency, test specimen thickness, inner diameter defects, and outer diameter defects are investigated. As a result, various impedance plane diagrams are drawn and analyzed. Significant practical knowldege about absolute signals is accumulated and similar characteristics of the two types of signal could be understood. Finally, slope angle versus defect depth calibration corves are prepared for three different frequencies.