• Title/Summary/Keyword: 상향방식 분석

Search Result 172, Processing Time 0.024 seconds

액체금속로 피동 원자로용기냉각계통의 특성 분석

  • 위명환;심윤섭
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.374-378
    • /
    • 1996
  • 피동 원자로용기 냉각계통은 원자로 용기를 둘러싸고 있는 격납공기 외부가 공기에 자연순환에 의해 냉각하는 방식으로 공기 흐름 구동력은 원자로용기의 외부 유로의 공기와 주변 대기와의 밀도 차이에 의하여 피동적으로 형성됨에 따라 높은 작동 신뢰성이 보장된 개념으로서 본 연구에서는 공기입구 위치에 따른 영향 및 격납용기와 유로 벽면간의 복사 효과 까지를 고려 할 수 있도록 해석 모형을 개선 시키고 개선된 모형을 이용하여 계통을 구성하는 설계인자들이 계통의 성능 및 크기에 미치는 영향등을 분석하였다. 이러한 분석을 통하여 공기의 입구 위치가 계통의 열제거용량에 미치는 영향, 상향공기 유로에서의 복사 열전달 고려 유무가 해석 결과에 미치는 영향 그리고 설계인자와 계통 성능간의 상관성을 밝혔다.

  • PDF

Performance Analysis of Equal Gain Transmission Technique for SC-FDMA System (SC-FDMA 시스템에서 동 이득 전송 기법의 성능분석)

  • Kim, Young-Ju;Li, Xun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.9
    • /
    • pp.1-7
    • /
    • 2009
  • LTE-A (long term evolution advanced) uplink selected SC-FDMA (single carrier frequency division multiple access) to maintain low PAPR for a low price and tiny terminal. Recently, the application of codebook-based preceding to LIE-A uplink is discussed. This paper shows that PAPR can be increased when various preceding schems are applied to the SC-FDMA as an LTE-A uplink. When, considering nonlinear power amplifier model to the transmitter, BER performances of preceded schemes degrade. But equal gain transmission scheme does show very low PAPR. So the link-level performance of EGT is superior to those of any other preceding schemes. Computer simulations also confirm the anticipated link-level performances.

A Uplink Performance Analysis of GAS-CP-CDMA Communication System (GAS-CP-CDMA 통신 시스템의 상향링크 성능분석)

  • Lee, Seong-Min;Kim, Whan-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.11A
    • /
    • pp.1079-1086
    • /
    • 2008
  • In this paper, we propose a Cyclic-Prefix Code Division Multiple Access system that uses Sequences with Good Autocorrelation property(GAS-CP-CDMA) and analyze the uplink signal-to-noise ratio performance of that system. Phase-shifted sequences are used for differentiating users. The signals of the GAS-CP-CDMA system experience no (or very little) interferences from co-cell signals because of the good autocorrelation property, but user signals of adjacent cells may yield interferences. The frequency reuse factor in the ordinary CDMA system is around 0.6 and the interference from adjacent cells is about 40 percent of the total interference in the conventional CDMA system. Our numerical analysis shows that the frequency reuse factor and user capacity versus signal-to-noise ratio of the GAS-CP-CDMA system are improved comparing to the conventional CDMA system. The uplink user capacity of the proposed system can be increased up to about twice of that of the conventional CDMA system.

A Study on Tools for Agent System Development (EPON 에서 단순 우선순위를 적용한 최선형 서비스 제어 방식)

  • Nam, Yoon-Seok;Kang, Bub-Joo;Do, Jae-Su
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2003.11b
    • /
    • pp.1169-1172
    • /
    • 2003
  • Ethernet 에서의 트래픽 제어 방식은 구현 및 제어가 용이한 최선형이 일반적인데, 이 경우 QoS 보장이 어려워 최근에는 Ethernet 에서도 광대역 및 QoS 등이 망 발전의 새로운 지표가 되면서 EPON 에서도 QoS 기반 DBA 연구가 진행되고 있다. 대부분의 QoS 기반 제어는 각 연결의 대역 및 지연 등의 서비스 특성에 따라 제어가 이루어지며, 연결별로 요구된 대역이 동일 ONU의 다른 연결 또는 다른 ONU의 연결들의 트래픽에 영향을 받지 않도록 보장되는 방식으로 제어가 복잡하다. 본 연구에서는 최선형 서비스에 기반을 두고, OLT 에서 각 ONU 의 연결대역별로 제어하지 않고 각 ONU 의 트래픽 특성을 서비스의 우선 순위에 적용하여 제어함으로써 간단한 제어로 실시간 서비스의 QoS 를 만족시킬 수 있는 DBA 방식을 제안하며, 또한 하향 트래픽에 따른 상향 트래픽의 영향을 분석하였다.

  • PDF

Estimation of Bearing Capacity according to Improvement of Helical Pile Connection System (헬리컬파일 연결부 개선에 따른 지지력 평가)

  • Lee, Jong-Beom;Jung, Dae-Seok
    • Proceedings of the Korean Society of Disaster Information Conference
    • /
    • 2017.11a
    • /
    • pp.347-348
    • /
    • 2017
  • 헬리컬파일은 한 개 이상의 나선형 원판이 고강도 강관 파이프에 부착된 말뚝이다. 기존의 헬리컬파일은 커플러 형태의 연결방식을 사용하였으나, 볼트 구멍과 볼트사이의 유격 및 연결소켓과 강관 사이의 유격등으로 인한 높은 지지력 기대가 힘들었다. 본 연구는 헬리컬파일 연결방식 개선을 위해 기존 커플러형식에서 플랜지 형식을 적용하였고, 정재하시험을 통해 지지력을 비교 분석 하였다. 정재하시험결과 플랜지 형태의 연결방식이 커플러 형태의 연결방식보다 높은 지지력이 발휘되었고 플랜지형태 적용시 상향식그라우팅이 가능하여 품질이 향상되었다. 또한 연결부 유격을 방지 할 수 있었다.

  • PDF

Cyclic Polling-Based Dynamic Bandwidth Allocation for Differentiated Classes of Service in Ethernet Passive Optical Networks (EPON망에서 차등 CoS 제공을 위한 주기적 폴링 기반의 동적 대역 할당 방법)

  • 최수일
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.7B
    • /
    • pp.620-627
    • /
    • 2003
  • Ethernet passive optical networks (EPONs) are an emerging access network technology that provide a low-cost method of deploying optical access lines between a carrier's central office and customer sites. Dynamic bandwidth allocation (DBA) provides statistical multiplexing between the optical network units for efficient upstream channel utilization. To support dynamic bandwidth distribution, 1 propose an cyclic polling-based DBA algorithm for differentiated classes of service in EPONs. And, I show that an interleaved polling scheme severely decreases downstream channel capacity for user traffics when the upstream network load is low. To obtain realistic simulation results, I used synthetic traffic that exhibits the properties of self-similarity and long-range dependence I then analyzed the network performance under various loads, specifically focusing on packet delays for different classes of traffic.

Optic Link Performances on EOM′s Biasing in Fiber-radio System (주파수 천이를 이용한 광무선 시스템에서 EOM의 바이어스 방식에 따른 광링크 성능 분석)

  • O, Se-Hyeok;Yang, Hun-Gi;Choe, Yeong-Wan
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.38 no.2
    • /
    • pp.128-136
    • /
    • 2001
  • This paper evaluates the performance of an optic link in a frequency conversion based fiber-radio system. The proposed link structure simplifies a BS(base station) via making the MMW(millimeter wave) optical pilot tone generated in the CS(control station) be used in the uplink as well as in the downlink. To acquire the optical pilot tone, an EOM(electro-optic modulator) in the CS is biased in three different ways, i.e., MAB(maximum bias), MIB(minimum bias), QB(quadrature bias). We, depending on the biasing of the EOM, evaluate the link performances in two cases; one is for constant laser source power and the other for constant received DC optical power at a PD(photo detector). Based on the simulation results on the downlink CNR and the uplink SFDR(spurious free dynamic range), we finally deduce the effective EOM biasing for each case.

  • PDF

Dental implant bottom-up cost analysis (치과 임플란트 상향식(bottom-up) 원가산정)

  • Kim, Min-Young;Choi, Ha-Na;Shin, Ho-Sung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.1
    • /
    • pp.18-26
    • /
    • 2014
  • Purpose: The purpose of this study was to estimate the cost of dental implant using the bottom-up approach with the current data from dental clinics. Materials and methods: In this study, direct and indirect costs required for each treatment were calculated using the bottom-up approach. In the bottom-up costing, the average monthly total cost of dental clinic includes labor and material costs, administrative expenses, medical malpractice costs, and opportunity costs of invested capital. For the dental implant cost components, those include direct costs (labor costs, laboratory costs, material costs, depreciation or other operating costs), indirect costs (administrative costs), and the opportunity costs of investment for dental clinic. Results: Dental implant costs of metal crown, porcelain crown and over-denture were 1,449,000 won, 1,583,000 won, and 2,471,000 won respectively. The proportion of cost components was as follows. The labor cost were 50%, and material, administrative and other cost were 33%, 15% and 2%, respectively. For direct, indirect and investment cost, the ratio were 83%, 15% and 2%, respectively. Conclusion: The labor costs were evaluated to comprise largest proportion (about 50%, 730,000 won). Dental implant cost using Bottom-up costing was 1,450,000 won for metal crown and 1,580,000 won for porcelain crown.

과학기술계 정부출연연구기관 연구개발 성과의 경제적 파급효과 추정에 관한 연구 - 기계분야 K연구원의 사례를 중심으로

  • Gwak, Gi-Ho;Park, Ju-Hyeong;O, Seung-Hun;Lee, Un-Gyu
    • Proceedings of the Korea Technology Innovation Society Conference
    • /
    • 2017.05a
    • /
    • pp.409-422
    • /
    • 2017
  • 과학기술계 정부출연연구기관(이하 출연(연))은 과학기술의 연구개발을 통해 국가 및 산업계 발전에 기여하기 위해 정부가 설립하고 운영을 재정적으로 지원하는 기관으로 1966년 한국과학기술연구원 설립 이후 2017년 현재까지 50년에 걸쳐 총 25개의 기관이 설립되어 운영 중에 있다. 설립 목적에서도 확인할 수 있듯이 출연(연)은 연구개발 성과를 활용하여 기술이전 지원을 통한 기업체 경영 성과 달성, 전문 연구 인력 배출, 정부 정책 수립 및 지원을 통한 산업 경쟁력 강화 등의 다양한 경제적 파급효과를 창출해왔다.. 그러나 출연(연) 연구개발 성과의 경제적 파급효과를 종합적이고 체계적으로 파악하기 위한 논의는 비교적 미흡한 실정이다. 이에 따라 본고에서는 기계분야 K연구원의 사례를 중심으로 출연(연) 연구개발 성과의 경제적 파급효과 산출을 위한 분석 틀을 제시하였다. 경제적 파급효과 분석의 틀은 크게 출연(연)의 연구개발성과가 이전 확산되는 산업의 경제적 성장에 대한 기관의 기여도를 산출하는 '하향식 접근'과 기술이전 지원, 전문 연구 인력 배출 등 기관의 연구개발 활동의 경제적 파급효과를 개별적으로 산출하여 더하는 '상향식 접근 방법'을 제시하였다. 이러한 '하향식 접근'과 '상향식 접근'의 활용은 두 방식을 통해 산출한 경제적 파급효과를 상호 비교함으로써 출연(연) 연구개발성과의 경제적 파급효과를 종합적이고 체계적으로 분석할 수 있는 기반을 마련하는데 그 의의가 있다. 향후 본 연구결과가 다양한 출연(연) 연구개발 성과의 경제적 파급효과를 산출하는데 활용되기를 기대한다.

  • PDF

An Empirical Approach on Textile Designer's Mental Model focused on the Motif Development for designing CAD tool of Digital Textile Printing (텍스타일 디자이너의 인지적 모형에 대한 실증적 접근 - 디지털 나염 전용 캐드 설계를 위한 모티브 개발을 중심으로-)

  • 송승근;이주현
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 2002.11a
    • /
    • pp.160-166
    • /
    • 2002
  • 본 연구의 목적은 비디오/오디오 프로토콜 분석 방식을 이용해서 텍스타일 디자인 프로세스 중 모티브 개발 단계에서 디지털 나염(DTP : Digital Textile Printing) 전용 캐드(CAD)와 같은 디자인 저작도구를 설계할 때 어떤 요소에 중점을 두고 개발 할 것인지에 대한 향상된 지침을 마련하는데 있다. 텍스타일 디자인 프로세스에 대한 프로토콜 분석을 위해 선행 연구를 고찰하여 디자인 행동 범주의 틀을 하향식(top-down)방식으로 설정하고 실제 행동 프로토콜 (action protocol) 분석을 통해 상향식(bottom-up)방식으로 세부 디자인 행동을 도출하였다. 텍스타일 디자인은 선행연구의 건축디자인과는 다른 특징을 지니기 때문에 프로토콜 분석에서도 새로운 디자인 행동 범주(action category)가 필요하게 되었다. 이를 위하여 모델 휴먼 프로세서(Model Human Processor)이론을 근거로 디자인 행동을 모터 행동(motor action), 지각 행동(perceptual action), 인지 행동(cognitive action)의 세 가지 범주[4]로 나누었으며 텍스타일 디자인 프로세스에 적합한 코딩 스킴(coding scheme)을 개발하였다. 본 연구에서는 이 새로운 코딩 스킴을 토대로 디자인 저작도구에 대한 디자이너의 인지적 모형(Cognitive Model)을 개발하였다. 이렇게 개발된 디자이너의 인지적 모형은 디지털 나염을 기반으로 하는 모티브 개발 단계에서 스케치와 렌더링에 대한 디자인 저작 도구의 향상된 설계지침 뿐만 아니라 방향도 시사하였다.

  • PDF