• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1999

Congestion and traffic accidents occur on the merge and diverge sections in the interchange of the freeway. Studies have been conducted to reduce the traffic delay and accidents on the merge section in the freeway since 1960s. but a study was not conducted to estimate the speed variation on the merge section construct models estimated for the speed variation and suggest the appropriate measures. The purpose of this study was to identify the traffic flow characteristics on the merge section in the freeway construct the models estimated for the speed variation on the merge section in the freeway and finally establish the appropriate measure for reduction of traffic delay and accidents on the merge section in the freeway. The following results were obtained: I) Speed variations in the urban freeway appeared to be about 3.2mph, 6.5mph and 7.4mph based on the morning peak period, afternoon peak period and 24-hours period but those in the suburban freeway appeared to be about 8.0mph, 11.1mph and 10.1mph based on the same periods respectively. So different speed reduction signs need be installed to reduce delay and accidents on the merge section in the freeway based on the areas and periods as the freeway traffic management system(FTMS). ii) These models estimated for speed variation need to be studied with the changeable message sign(CMS) technique based on the real-time data so that the traffic flow could be maximized and the traffic delay and accidents be on the merge section in the freeway as more efficient freeway traffic management system(FTMS) in the near future.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.145-151
• /
• 2009

Current highway design standards is based on the safety under the free flow condition. The length of deceleration lane is also determined in terms of the deceleration distance which is necessary for the driers to adjust the vehicle speed from the speed limit on the main road to that on the exit ramp of the interchange. However, the queues are frequently developed on the deceleration, and the following vehicles to exit must decelerate on the main road. It may cause delay on the main road and traffic accidents. This study is to suggest a methodology to minimize such problems with the shock-wave theory. The queue length of exiting vehicles can be estimated by the design speeds, traffic volumes of main road and the exiting ramp, and the countermeasures to the operational problems. According to the results, the queue length can be shortened to 80% by upgrading the design speed of exit ramp as the amount of 10km/h. Fifty percent of queue length can be shortened by adding an additional lane on the ramp to two lanes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.40-51
• /
• 2020

Much time has passed since Korea's expressway congestion-threshold speed was revised in 2011. In the meantime, various expressway environments have changed owing to improved performance of vehicles, expanded operations of transport competition (i.e., the KTX), and increased speed limits along some expressway sections. In addition, the speed that expressway users expect to travel at is also increasing. Therefore, through a survey, this study investigates expressway users' perceptions of congestion, and reviews the adjustment of the expressway speed congestion threshold by analyzing expressway traffic flow. One result of the survey confirms that the threshold speed expressway users consider to be congestion has slightly increased. Analyzing traffic and speed data through a K-means algorithm found that the threshold speed for congestion is 60 km/h. In addition, assuming the congestion threshold speed increase from 40 km/h to 50 km/h and 60 km/h, frequently congested expressway sections are identified, determining that 50 km/h is appropriate as a congestion threshold for proper expressway mobility management.