• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.33-38
• /
• 2012

A LEO Satellite performs automatic initial operations by FSW after separation from a launch vehicle. After initial operation by FSW is finished, preparation for normal operation is performed by ground during bus initial activation and checkout phase. First of all, we check state of health of the satellite including solar array deployment status. After then, each unit of spacecraft bus is activated and checked. After activation and checkout of every units used for normal operation, we check maneuver performance for imaging mission and orbit maintenance performance. Because the Bus IAC is performed during limited ground contact time, every detailed procedure must be designed considering ground contact. Therefore, the Bus IAC procedure is separated into several parts based on ground contact duration. In addition, the procedures for every possible operation including expected situation as results of IAC procedures and unexpected contingency situation must be prepared. The contingency operation is also designed based on ground contact duration. The LEO satellite was successfully launched and the Bus IAC was successfully performed. In this paper, we explain design concepts and execution results of Bus IAC.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.31-38
• /
• 2022

In the case of special bridges whose superstructure is supported by cables, there are many blind spots that are difficult to access without special equipment and personnel. As a result, there are difficulties in the safety inspection of special bridges. The purpose of this study is to review the inspection blind spots of cable-supported bridges such as cable-stayed bridges and suspension bridges, and to study ways to eliminate blind spots using drones. To this end, the cables, stiffened girder, and pylons of the cable-stayed bridge located in the sea were inspected using drones. Through this study, it was confirmed that external safety inspection of special bridges that are difficult for inspectors to access is possible using drones. In particular, drone inspection to check the external condition and damage of the pylon, which is a blind spot for inspection of special bridges, is a very effective safety inspection method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.483-484
• /
• 2016

본 논문에서는 아두이노와 FSR 센서를 이용하여 실시간으로 사용자의 앉은 힘의 정도를 측정하여 대략적인 자세를 파악하고 센서의 정보를 이용하여 기간별 자세 상태를 점검할 수 있도록 프로그램을 구현하였다. FSR 센서를 통하여 앉아 있는 사용자의 압력 값을 입력받아 실시간으로 출력해주고, 정보들을 웹 서버의 데이터베이스에 저장한다. 데이터베이스의 값들을 이용하여 기간별로 자신의 자세 상태를 차트로 보여주어 한눈에 알 수 있도록 구현하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4147-4157
• /
• 2015

The weapon system has developed by adding various functions because of the warfare change. And, an weapon system test set (WSTS) that is used to test and judge the condition of weapon system also deal with a lot of complex information. However, almost WSTS is developed on the basis of developer-centric. Because of it, it is hard to make a result by apprehending information on WSTS's display. Thus, I proposed a new display of WSTS by adapting the Ecological Interface Design(EID) Methodology to reduce operator's cognitive workload and assure safe testing. WSTS's Display is developed through Information Requirement and Work Domain Model as a result of Work Domain Analysis. The most powerful thing in the new display is that operator can identify his testing and status of WSTS directly. I expect that it reduces operator's cognitive workload and helps safe testing.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.18 no.1
• /
• pp.38-48
• /
• 2019

The purpose of this study is to present a more effective daily checklist than the formal routine check before the experiment to prevent accidents in the university laboratory. To do this, we reconstructed the current daily checklist and previous research data and conducted a second Delphi survey. As a result, there were four general safeties such as arranging the laboratory, three mechanical safeties such as abnormal condition of machine and tool tightening parts, three electric safeties such as prohibition of loading around the electric distribution panel, six chemical safeties such as handling and managing harmful factors, three items of fire safety such as fire extinguisher inspection, five cases of gas safety gas container inspection, one item of biological safety such as the state of hand sterilizer management and one other item, which were provided in the daily checklist as twenty six categories in total. According to the opinions of related experts, it is necessary to have an easy and simplified daily checklist for actual daily checkups.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.320-326
• /
• 2021

AVTE(Air Vehicle Test Equipment) is an equipment to inspect and check the status of on-board aircraft LRUs(Line Replacement Units) before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper suggests utilization of the AVTE as an operation support-equipment by implementing several critical functions for UAV-operation on the AVTE. The AVTE easily sets initialization(default) data and compensates for the installation and position errors of the LRUs which provide critical mission data and situation image with pilots without additional individual operation support-equipment. Major fault list and situation image data could be downloaded after flight using the AVTE in the event of UAV emergency situation or unusual occurrence on duty as well. We anticipate the suggested operational approach of the AVTE could dramatically reduce the cost and man power for design and manufacture of additional operation support equipment and effectively diminish workload of the operator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.113-118
• /
• 2012

This thesis suggests how to design and implement an Android smart phone application which can perform self check or safety inspection of lifts effectively. The safety checks of lifts go in the way that inspectors check the lifts' conditions generally and record manually following a form at the moment. This thesis analyses lift maintenance industry and introduces how to design a system to proceed effective self check using a smart phone with Android OS. By using a smart phone to check lifts, we can have advantages to improve the quality of self check and maintain careers establishing information database about safety items.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.34-40
• /
• 2008

In this paper, a device for safety inspection of a guard lamp with an automatic switch which has been recently employed in some local autonomous entities was developed. It is technically enhanced by installing a separate inspection box down below, which allows the inspectors can measure the leakage current, the sound function of the electric leakage breaker(ELB), the insulation resistance and the grounding resistance, on the ground. This inspection box makes the inspectors free from the electric shock by being designed to minimize the potential direct contact with the energized terminals. The deliverables of this paper are expected to contribute to carry out the inspection for the guard lamps safely and effectively.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1083-1086
• /
• 1999

중수로(CANDU) 형 월성 원자력발전소의 칼란드리아 압력관 전면부를 감시점검하기 위한 열영상 관측시스템을 설계/제작하였다. 중수로는 가동중에 핵연료를 교체한다. 칼란드리아 전면부에는 380 개의 압력관 채널이 위치하고 있다. 핵연료를 교체할 시에 핵연료 교체장비가 칼란드리아 압력관 채널의 ENDCAP을 열고 핵연료를 장전하는 과정에서 발생할 지도 모르는 중수누출, 핵연료교체장비의 이상상태를 점검하는데 목적이 있다. 열영상카메라는 상용 CCD 카메라에 비해 영상의 해상도가 떨어진다. CCD 카메라는 수증기 누출과 같은 육안검사에 활용하고, 열영상카메라는 압력관 채널의 온도변화 등을 점검하기 위해 CCD/열영상카메라의 융합구조로 설계/제작하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1739-1740
• /
• 2008

수문관측용으로 사용되는 우설량계는 측정의 편의성과 강인성의 장점 때문에 대부분 전도형 우설량계를 사용하고 있으며, 하절기에는 강우량을 측정하고 동절기에는 강설량을 측정할 수 있도록 구성되어 있다. 동절기에 강설량을 측정하기 위하여 자동 히팅하는 장치가 포함되어 있어, 눈이 생성될 수 있는 온도조건에서 히터가 작동되고 적정온도가 되면 히터의 동작을 멈출 수 있도록 히터 및 온도센서가 구성되어 있다. 우설량계의 유지.관리 측면에서 주기적으로 동작상태 등을 점검하고 있으며, 히팅장치도 점검의 대상이다. 그러나 히팅장치의 동작 유무를 판단하는 방법에 있어서 효율적인 방법을 사용하고 있지 않고 있다. 따라서 본 연구에서는 평상시에 우설량계 점검시 온도센서에 의해 감지되는 가변적인 온도신호에 따라 히터가 제대로 작동되는지의 여부를 판단하기 위하여, 사전에 점검하기 용이하도록 우설량계 히터 동작시험 장치를 개발하였으며, 이 장치에 대한 동작특성을 분석하고자 한다.