• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.331-332
• /
• 2006

교류 전동기는 전류의 측정오차와 데드타임 등의 영향으로 전기각 주파수에 동기된 주기적인 토크 리플이 발생한다. 본 논문에서는 주기적인 토크리플 보상 알고리즘을 제안한다. 보상기는 속도리플 관측기와 토크리플 보상기로 나누어진다. 본 논문에서는 토크리플 보상기의 해석을 통해 정상상태에서 속도 리플이 제거됨을 증명하였고 속도리플 관측기는 속도의 리플을 검출하여 토크리플 보상기를 통해 토크리플 성분이 보상됨을 시뮬레이션과 실험을 통해 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.65-71
• /
• 2006

In this paper, a novel motor control method is proposed to improve the performance of sensorless drive of BLDC motors. In the terminal voltage sensing method, which is a great portion of sensorless control, a precise rotor position cannot be obtained when excessive input is applied to the drive during synchronous operation mode. Especially in the transient state, the response characteristic decreases. To cope with this problem, the unknown input (back-EMF) is modelled as the additional state of system in this paper. Taking into account the disturbance adopted by the back-EMF, the observer can be obtained by the augmented system equation. An algorithm to detect the back-EMF of the BLDC motor using the state observer is constructed. As a result, the novel sensorless drive of BLDC motors that can strictly estimate rotor position and speed is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.58-66
• /
• 2009

In this paper, vector control to applied disturbance offset feedforward loop control for changing disturbances with various mechanical parameter is suggested. The proposed system estimate load torque based on induction motor torque using minimum diemension state observer. Because speed controller using state observer is used on condition of feedforward loop fur a torque, the robust speed control system realized. In this study, the proposed paper does to heighten reliability of system by presuming and use the speed by voltage and current that is detected without speed sensor. To prove the propriety of this paper, the various simulation carried out adequacy using a Matlab Simulink, and at the same time real system is made, using a ADMC300 digital signal processor, so it is proved. As the experimental result of embodying the system, the robust system is realized.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.75-81
• /
• 2002

In the re-entry comtrol system, errors apt to induce because the time deriviative of drag acceleration is analytically estimated. Still more, the difficulty of estimation of th exact drag coefficient in hypersonic velocity and the non-reality of the scale height cause a steady-state drag errer. In the Space-Shuttle, a steady-state drag error is reduced by the addition of the integral term of drag acceleation error into the control system. This method, however, induces a difficulties in respect to the modern controller composition due to the multi-poles in a closed-loop system. Thus, this paper proposes the additional method of the disturbance observer. This reduces the steady-state drag error according to the following by the analytic calculation, and then creates the new drag acceleration time derivative using the estimated error. The performance of the re-entry control system is verified about 32 refernce trajectories.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.127-128
• /
• 2008

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.208-209
• /
• 2011

본 논문은 SRM의 센서리스 속도제어를 위한 슬라이딩 모드 자속관측기법을 적용하고, 동일한 센서리스 추정방식으로 초기 기동에서 센서리스 영역까지의 천이 구간에서 오픈루프 속도리플을 억제할 수 있는 방식을 제안한다. 제안된 방식에서 센서리스 위치추정은 슬라이딩으로 자속관측기를 적용하고 있지만, 자속 계산에서 위치오차를 감소하기 위한 오차 성분을 고려하였으며, 특히 초기기동에서 동일한 관측기와 계산된 자속의 오차 성분으로 오픈루프 상태에서의 전류제어를 수행함으로써 천이구간에서의 속도리플을 억제할 수 있다. 제안된 방식은 컴퓨터 시뮬레이션을 통하여 타당성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.575-579
• /
• 2006

In this paper, an instantaneous speed observer with a reduced order is proposed to implement an indirect control for a motor with excellent dynamic stability and performance in a very low speed region. The proposed observer can estimate the instantaneous speed in very low speed region and simplify the system configuration by adopting an least order load torque-inertia observer to estimate the load torque and the motor speed. Simulation are carried out to illustrate the performance of the proposed estimator at very low speed.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1135-1137
• /
• 2001

본 연구는 자계방향 기준 벡터제어 이론에 기초하여 속도 센스리스 벡터제어를 구현한다. 벡터제어는 상태량에 기초한 MRAS (MRAS: Model Reference Adaptive System)방법은 이득정수의 결정이 어려운 결점을 가지고 있다. 여기서는 관측기 이론에 기초하여 2차자속 관측기와 전류센스에서 검출한 전류값으로 속도추정을 행하는 새로운 속도 추정법을 제안한다. 그리고 제안한 방법이 자계 방향 벡터제어 시스템의 실현에 가능성이 있음을 시뮬레이션으로 검토한다.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.103-105
• /
• 2003

본 논문에서는 이동로봇의 마찰력 보상을 위해 퍼지 외란 관측자를 설계한다. 이동로봇은 주행 바닥면에 따라 주행 특성이 달라질 수 있다. 주행 중 발생하는 마찰력은 비선형적인 특성을 가지므로 이에 검출할 수 있는 퍼지 관측기를 설계하도록 한다. 설계된 퍼지 관측기를 적용함으로써 주행 바닥 면의 상태에 따라 발생하는 마찰력의 영향을 최소화시킴으로써 주행 특성을 효과적으로 개선시킬 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.