• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.140-144
• /
• 2002

The sample environment at high temperature for the four circle diffractometer at HANARO in Korea Atomic Energy Research Institute is developed. The performance test was carried out for a structurally known sample through the high temperature experiment with this equipment. In this study we found out that the developed sample environment is stable for a long time experiment at over 900 K. By the neutron diffraction from a single crystal of $LiTaO_3$(phase transition temperature about 900 K) at 298 and 913 K, the lithium atomic positions at both temperatures and disordered state of lithium atom at high temperature were confirmed. These are hardly possible to determine by the conventional X-ray diffraction method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4689-4695
• /
• 2011

Nanodiamond is a relatively new nanomaterial with broad prospects for application. In this paper, a variety of methods were used to analyze comprehensively chemicophysics properties of the detonation monocrystalline and synthetic polycrystalline nanodiamond, XRD spectroscopy, EDS, HRTEM, FTIR, Raman spectroscopy, TGA-DTA and BET. The results show that the monocryctalline detonation nanodiamond particles are spherical or elliptical shape of 4nm ~ 6nm grain size and the polycryctalline synthetic nanodiamond particles are angular shape of 80nm ~ 120nm grain size. The surface of the monocrystalline and polycrystalline nanodiamond contain hydroxy, carbonyl, carboxyl, ether-based resin, and other functional groups. The phase transition temperature of the monocrystalline detonation nanodiamond in the $N_2$ is about $650^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1685-1690
• /
• 2014

This paper proposes a novel method to compensate for the measurement errors in detecting phase currents for vector-controlled inverter in real-time. The output torque equations for 3-phase induction motor are derived in terms of offset error and transducing gain error in current measurement circuits, and the equations shows that motor output torque has many ripples due to current measurement errors. Especially, if the proposed method is applied to vector-controlled inverter, the torque ripple by transducing gain error can be reduced in real-time at running state of motor. To verify the proposed method, it was applied to vector-controlled inverter for 3-phase induction motor of 200[W] and computer simulation and experimentation were carried out.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.27-28
• /
• 2005

본 연구에서는$Cr_2O_3$ 와 $Nb_2O_5$ 를 첨가한 $Pb(Zr_{0.54}Ti_{0.48})O_3$ 세라믹스에서 $Nb_2O_5$ 첨가량에 따른 소결 및 압전, 유전특성을 조사하였다. $Pb(Zr_{0.54}Ti_{0.48})O_3$ + 0.2 wt% $Cr_2O_3$ + wt% $Nb_2O_5$ ($0.{\sim}2wt.%$)의 첨가량에 따른 압전, 유전특성 및 미세구조에 관해 연구하였다. 본조성에서 $Nb_2O_5$ 첨가량이 증가함에 따라 입경의 크기는 증가하였으며, 0.5 wt% $Nb_2O_5$ 첨가조성에서 $4\sim5\mu m$의 최대 평균입경을 보이다가 그 이상의 첨가 조성에서 급격히 감소하였다. 유전상수와 kp 는 $Nb_2O_5$ 첨가량이 1.0 wt% 조성까지 증가하였다가 그 이상 조성에서 감소하였다. $Nb_2O_5$ 첨가량이 증가함에 따라 삼방정(rhombohedral)구조에서 정방정(tetragonal)구조로 상전이 일어났으며, 본 조성의 상경계 영역인 0.5 wt% 조성에서 $\varepsilon_r$ = 730, $k_p$ = 0.72, $d_{33}$ = 450, $g_{33}$ = 70의 우수한 압전 특성을 나타내었다. 이러한 조성은 접촉센서용 복합압전소재의 실용가능성을 제시하였다.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.505-510
• /
• 1999

$TiO_2$ powders were prepared via hydrolysis of titanium n-butoxide in n-butanol and hydrolysis mechanism of titanium n-butoxide was studied using UV-Vis spectrometer. Hydrolysis reactions were controlled to proceed to pseudo-first order reaction in the presence of excess water. The phases of $TiO_2$ powders, prepared under the these conditions, were identified by XRD and reaction rates were calculated by Gugggenheim method. Prepared powders were noncrystalline states in their initial stage of formation but transformed to crystalline rutile structure by heating. Reaction mechanism of titanium n-butoxide was proposed as Interchange-Associative(Ia) mechanism, based on the data of n-value and termodynamic parameters which were determined from the rate constants.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.107-116
• /
• 1995

The critical micelle concentration(CMC) of CTAB was determined with changes in absorbance at 202nm band of 4-biphenyl acetate($BPA^-$). With $BPA^-$ as a probe, the effect of temperature on CMC of CTAB has been observed between $30^{\circ}C{\sim}70^{\circ}C$. In this range of temperature the values of CMC are $1.18{\times}10^{-4}{\sim}2.02{\times}10^{-4}M$. The free energy(${\Delta}G^{\circ}m$) and enthalpy(${\Delta}H^{\circ}m$)for the micellization of CTAB was negative and the entropy(${\Delta}S^{\circ}m$) was a large positive value. The micellization of CTAB is considered as a spontaneous process and to involve a phase transition. The orientational binding of 4-biphenyl acetate anion to the CTAB micelle interface has been studied with $300MHz\;H^1-NMR$ data. The change in chemical shift of proton in CTAB as well as those of the protons in $BPA^-$ have been investigated by increasing the mole fraction of the anion in the mixed solutions. The changes in chemical shift with increasing mole fraction of anion($BPA^-$) indicate the formation of mixed micelle between CTAB and $BPA^-$. The changes in chemical shifts of methylene protons in CTAB, demonstrate the penetration of $BPA^-$ into the palisade layer of the CTAB micelle.

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.117-128
• /
• 2001

DMF is not a good solvent for PVA. There is no solvent-PVA interaction such as H-bonding. DMF/PVA makes a UCST system. DMF/PVA makes a gel through crystallization-induced gelation. X-ray, thermal analysis, and other experimental proofs are presented. The gelation rate was faster at low temperature. Small addition of PEG increased the rate of gelation, but urea decreased the rate. SEM showed the phase demixing process very clearly. In the early stage of gelation, only phase demixing was occurring at a low rate. Hence, no holes appear in the early stage photographs. As demixing proceeded further, the holes began to appear and the sizes became bigger. DMF phase remains many holes after vaporization and PVA phase constitute the matrix phase.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.339-346
• /
• 1997

Liquid crystalline polyurethanes were prepared from 1,4-bis(6-hydroxyhexoxy)benzene (BHB6) and 2,5-tolylene diisocyanate (2,5-TDI) solution polymerization in dimethylformamide produced intrinsic viscosities in the range 0.26 and $0.42d{\ell}/g$. The polyurethanes were investigated by DSC, Polarizing microscopy, X-ray, $^1H$-NMR and IR spectroscopy. Polyurethanes of two different molecular weights were studied in detail and these will be referred to as low molecular weight and high molecular weight. Polyurethane 2,5-TDI/BHB6 with $[{\eta}]=0.26d{\ell}/g$ prepared from BHB6 and 2,5-TDI, exhibited monotropic liquid crystallinity, although these polyurethanes contained no mesogenic core unit. For example, LCPU-L(low molecular weight) exhibited $T_{I-LC}$ of $122^{\circ}C$ $T_{LC-K}$ $89^{\circ}C$.

• Journal of Chest Surgery
• /
• v.36 no.4
• /
• pp.289-292
• /
• 2003

Primary malignant melanoma occurring in the lung is very rare and only few cases have been reported in the literatures. We have experienced one case of primary malignant melanoma of the right middle lobe. The patient was a 65-year-old male who had cough with blood tinged sputum for one month. Chest computed tomography showed about 4.5$\times$3 cm sized mass at the right middle lobe encasing the bronchus. Percutaneous needle biopsy was performed and confirmed to malignant melanoma. Physical examination and additional clinical history showed that the mass had not metastasized to other possible primary sites. The patient underwent thoracotomy with right middle lobe lobectomy. Histologically, the tumor showed sheets of tumor cells that have nuclear atypia and melanin pigment Postoperative course was uneventful and the patient has been followed up for 24 months with no recurrence.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.296-304
• /
• 1992

Porous polyurethane membrane was prepared by the phase inversion process with variable permeability in response to pH and solvent composition. Hydrophilic polymers were grafted on the surface of the symmetric porous membrane. Porous polyurethane membrane was obtained in DMSO/methanol. It was subsequently grafted with acrylamide on the surface with ceric ammonium nitrate(CAN) as a initiator, followed by the hydrolysis to obtain poly(acrylic acid-g-urethane) (PAA-g-PU) membrane. The change in permeability of vitamine $B_2$(riboflavin) was investigated through PAA-g-PU. For PAA-g-PU membrane, permeability increased with the decrease in pH, and with an increase in solvent content in sink solution.