• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• Composites Research
• /
• v.25 no.6
• /
• pp.172-177
• /
• 2012

For the manufacture of low resistance Si-SiC composite, the properties of reaction sintering in the green body of various mixed ${\alpha}$-SiC powder size with the various carbon contents from 0wt% to 20wt% were investigated. The samples preparation was green body by CIP method under this condition, molten silicon infiltration process was conducted to reaction bonded silicon carbide. the results of sintered density, 3-point bending strength and resistance of analysis showed that varied carbon and silicon melt reacted to convert to fine ${\beta}$-SiC particle and the structure was changed to dense material. The amount of fine ${\beta}$-SiC particle was gradually increased as carbon content increase. According to mixed composite, it's mechanical and specific resistivity properties was strongly influenced by carbon content within 10wt% more then carbon content 10wt% was strongly influenced by phase transition.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.59-66
• /
• 1997

Di(10-hemisuccinyloxy)decyl muconate(DDM) and di(6-hemisuccinyloxy)hexyl muconate(DHM) were synthesized, and showed a phase transition in an aqueous solution at 97 and $79^{\circ}C$, respectively. They did not form liposomes by themselves or even in the presence of cholesterol or dioleoylphosphatidylethanolamine(DOPE), but did form liposomes when they were mixed with phosphatidylcholine(PC). DHM molecules in liposome membranes were readily polymerized via 1,2-polymerization process on exposure to 254nm. Liposomes composed of DOPE/dioleoylphosphatidylcholine(DOPC)/DHM(3/3/1) were stable at neutral pH, but leaky at weakly acidic pH. The leakage of entrapped calcein from liposomes in phosphate-buffered saline (PBS, $37^{\circ}C$) of pH 4.8 and 5.8 was complete within 30 and 50 min, respectively. The release of toke entrapped calcein was increased with decreasing pH such that 50% and 100% of the calcein were released at pH near 5.5 and 5.0, respectively.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.681-685
• /
• 2015

In this study, pure $BiVO_4$ powder and metal-doped $M-BiVO_4$ (M = Mg, Cu) powder, well known as thermochromic materials, were prepared from a mixed aqueous solution of bismuth nitrate ($Bi(NO_3)_3$) and ammonium vanadate ($NH_4VO_3$) in autoclave by hydrothermal method. The crystal structure, microstructure, and thermochromic property of samples were analyzed using FE-SEM, FT-IR, XRD, DSC, UV-Vis-NIR spectroscopy and colorimeter. When heating samples above phase transition temperature, the color of $M-BiVO_4$ (M = Mg, Cu) sample was thermally changed more clearly than that of using only pure $BiVO_4$ sample.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.744-748
• /
• 2010

2,3,4,5-Tetrafluorobenzoic acid, an important intermediates of fluoroquinolone antibiotics, was synthesized from tetrachloride phthalic anhydride through imidation, fluorination, hydrolysis and decarboxylation. The effects of phase transfer catalyst on imidation and fluorination reaction and the effects of surfactants on the hydrolysis reaction were studied, respectively. Experimental results showed that the imidation reaction time was greatly reduced in the presence of a phase transfer catalyst, hexadecyltrimethyl, resulting in imidation yield as high as 98.2%. The fluorination yield reached 81.3% when tetrabutylammonium bromide was chosen as a phase transfer catalyst. The hydrolysis reaction time was also decreased by adding hexadecyltrimethyl while increasing the yield to 88.6%. In the post-processing, the sublimation method was used to purify the product, and ideal effect was obtained. In the decarboxylation reaction, tetrafluoride phthalic acid was obtained by decarboxylation in the solvent of tri-n-butyl amine and decarboxylation yield reached 81.6%. Compared with the literature method, the overall reaction time of the improved method decreased from 53 h to 20.5 h and the total yield increased from 47.3% to 57.4%.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.369-375
• /
• 2015

In this study, the formation potential and the stability of nano-emulsions were evaluated according to the structure of various cosmetic oils in Tween 80/Span 80 system using PIC method at 80 oC LP 70, Isopar H and Pripure 3759 of hydrocarbons were both form a stable nano-emulsion, particle size distribution of about 40 nm. A linear structure of silicone oil formed an unstable emulsion, but cyclic or short chain oil formed was a stable nano-emulsion. In ester oils, the particle size of emulsions increases with increasing molecular weight of oils and a stable nano-emulsion could not be obtained in the molecular weight of about 450. The particle size of the nano-emulsion against required HLB value for calculating in consideration of the lipophilic and hydrophilic oil was smaller in the HLB of 8-10.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.43-46
• /
• 2015

$Si(100){\backslash}200nm$ $SiO_2{\backslash}5nm$ $Ta{\backslash}5nm$ $MgO{\backslash}35nm$ $Fe_3O_4$ multi-layers were prepared by using RF-sputtering and ultra-high vacuum molecular beam epitaxy (UHV-MBE) techniques. After post-annealing the multi-layers at $500^{\circ}C$ for 1 hour under the high vacuum of ${\sim}1{\times}10^{-6}Torr$, we observed ferromagnetic properties at room temperature as well as the Verwey transition which is the typical features of magnetite crystals formed. We have carried out a comparative study of the effect of Ta buffered layer on the crystallinity and magnetic properties of $Fe_3O_4$ thin films prepared under different growth and annealing conditions.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.71-75
• /
• 2016

Monolayer $MoS_2$ is energetically most stable when it has a 1H phase, but 1H to 1T phase transition ($1H{\rightarrow}1T$) is easily realized by various ways. Even though magnetic moment is not observed during $1H{\rightarrow}1T$, $0.049{\mu}_B/MoS_2$ is obtained in local 1T phase; 75% 2H and 25% 1T phases are mixed in ($2{\times}2$) supercell. Most magnetic moment is originated from the 1T phase Mo atom in the supercell, while the magnetic moments of other atoms are negligible. As a result, magnetic/non-magnetic boundary is created in the monolayered $MoS_2$. Our result suggests that $MoS_2$ can be applied for spintronics such as a spin transistor.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2008

In this paper we consider an application of the method of electromagnetic (EM) migration to the interpretation of a typical marine controlled-source (MCSEM) survey consisting of a set of sea-bottom receivers and a moving electrical bipole transmitter. Three-dimensional interpretation of MCSEM data is a very challenging problem because of the enormous number of computations required in the case of the multi-transmitter and multi-receiver data acquisition systems used in these surveys. At the same time, we demonstrate that the MCSEM surveys with their dense system of transmitters and receivers are extremely well suited for application of the migration method. In order to speed up the computation of the migration field, we apply a fast form of integral equation (IE) solution based on the multigrid quasi-linear (MGQL) approximation which we have developed. The principles of migration imaging formulated in this paper are tested on a typical model of a sea-bottom petroleum reservoir.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.104-109
• /
• 2006

Cu-doped $TiO_2$ thin films were prepared by RF magnetron co-sputtering, and their structural, optical and photodegradation. properties were examined as a function of calcination temperature. XRD results showed that the crystallite size of Cu/$TiO_2$ thin films was bigger than that of the pure $TiO_2$ thin films. SEM results revealed that the agglomerated particle size of the Cu/$TiO_2$ films was more uniform and smaller than that of pure $TiO_2$ films. The absorption edge of thin films calcined at $900^{\circ}C$ was red shifted, resulting from the phase transformation from anatase to rutile phase, and the transmittance of the thin film rapidly decreased due to an increase in particle size. The photodegradation properties of the Cu/$TiO_2$ thin films were superior to those of the pure $TiO_2$ thin films.