• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.30.1-30.1
• /
• 2009

PZT(Pb(Zr, Ti)$O_3$ 압전세라믹스는 뛰어난 압전 특성과 강유전 특성을 가지고 있어서 현재 널리 사용되고 있다. 하지만 PZT세라믹스는 큐리온도 이상에서 그 특성을 잃게 되고 높은 온도에서의 응용이 제한된다. 따라서 높은 큐리온도를 가지는 압전체를 개발하기 위한 연구가 많이 이루어지고 있다. $PbTiO_3$의 경우에는 $Bi(Zn_{0.5}Ti_{0.5})$, $BiFeO_3$등의 Bi계 세라믹스를 치환하면서 큐리온도가 올라가는 결과가 보고되고 있다. 하지만 이것은 PZT세라믹스 보다 압전 및 유전 특성이 상당히 낮다. 따라서 본 연구에서는 $(1-x)PbZrO_3-xPbTiO_3$조성에 Bi(Me)$O_3$(Me:Zn, Ti, Fe, Al)를 치환하여 압전특성 및 강유전 상전이 온도를 조사하였다. 모든 시편들은 고상반응법으로 제조하였고, 제조한 시편으로 조성에 따른 압전특성 및 유전특성의 변화를 측정하였다. 그리고 이를 통해 큐리온도는 PZT의 MPB조성근처에서 Bi계 세라믹의 치환은 $T_C$가 낮아 졌으나, Tetragonal 상을 가지고 있는 Ti-rich인 조성에서는 $T_C$가 높아지는 것을 관찰하였다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.149-153
• /
• 2000

Large magnetic entropy change in single crystalline and polycrystalline perovskite manganites La$_{0.7}$Ca$_{0.3}$MnO$_3$ has been observed as magnetic field is changed. The large magnetic entropy change is believed to be caused by the abrupt reduction in magnetization as a result of 1st order-like magnetic transition. The large magnetic entropy change and easiness of the Curie temperature manipulation in the temperature range 100 K

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.892-897
• /
• 2001

Variations of dielectric and piezoelectric properties and associated phase transformation of <001> -oriented rhombohedral 0.92Pb (Zn$\sub$1/3/Nb$\sub$2/3/)O$_3$-0.08PbTiO$_3$ single crystals were investigated. The longitudinal strain level was found to abruptly increase at 15 kV/cm, corresponding to that where an induced phase appears within a multidomain matrix. Drastic decreases in the dielectric constant, transverse coupling, and transverse piezoelectric coefficient associated with the E-field induced phase were the result of increased crystal anisotropy in PZN-PT crystals. By contrast, the thickness coupling increased from 53 % at 0 kV/cm to 64 % at 45 kV/cm, also associated with this phase transition under the E-field. The measured dielectric and piezflelectric properties found for the induced phase state were nearly identical to those of <001> poled tetragonal (1-x)PZN-xPT (x>0.1) crystals. Based on these results, it is evident that the symmetry of induced phase is tetragonal.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.403-407
• /
• 2005

Most of the loads in industrial power distribution systems are balanced and connected to three power systems. However, voltage unbalance is generated at the user's 3-phase 4-wire distribution systems with single & three phase. Voltage unbalance is mainly affected by load system rather than power system. Unbalanced voltage will draws a highly unbalanced current and results in the temperature rise and the low output characteristics at the machine. It is necessary to analyse correct voltage unbalance factor for reduction of side effects in the industrial sites. Voltage unbalance is usually defined by the maximum percent deviation of voltages from their average value, by the method of symmetric components or by the expression in a more user-friendly form which requires only the three line voltage readings. If the neutral point is moved by the unbalanced load at the 3-phase 4-wire system. Line and phase voltage unbalance leads to different results due to zero-sequence component. So that it is difficult to analyse voltage unbalance factor by the conventional analytical method, This paper presents a new analytical method for phase and line voltage unbalance factor in 4-wire systems. Two methods indicate exact results.

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.281-286
• /
• 2004

[ $LiOH{\cdot}H^2O$ ]와 $Ni(OH)^2$를 기계적으로 혼합하여 고상법으로 $LiNiO^2$를 합성하고, $LiNiO^2$의 전기화학적 특성을 조사하였다. 기계적 혼합을 위해 SPEC mill을 사용하였으며, 1시간 동안 milling하여 공기 중 $450^{\circ}C$에서 5시간 동안 전처리한 후 $750^{\circ}C$에서 30시간 동안 산소를 흘려주면서 하소한 시료가 가장 좋은 전기화학적 특성을 나타내었다. $2.7\~4.15V$에서 0.1C로 충${\cdot}$방전시 초기방전용량은 그다지 높지 않았으나(145.8mAh/g) 좋은 싸이클 성능을 나타내었으며, $2.7\~4.2V$에서 0.1C로 충${\cdot}$방전시 높은 초기방전용량(164.7mAh/g)을 나타내었으나 싸비클 성능은 그리 좋지 않았는데, 이는 충${\cdot}$방전시 육방구조$(H^2)$에서 육방구조$(H^3)$로의 상전이가 영향을 주는 것으로 사료된다. 초기방전용량과 방전용량은 Cation mixing을 나타내는 $I^{003}/I^{104}$값보다 hexagonal ordering을 나타내는 R-factor에 더 의존하는 것으로 사료된다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.5
• /
• pp.582-586
• /
• 1995

The crystal structures of (Na0.3Sr0.7)(Ti0.7M0.3)O3 (M=Ta, Nb) compounds were determined using the Rietveld method. Due to the tilting of a oxygen octahedron, (Na0.3Sr0.7)(Ti0.7Nb0.3)O3 had a superlattice of doubled a, b and c of simple perovskite. The crystal structure of (Na0.3Sr0.7)(Ti0.7M0.3)O3 was tetragonal with a space group 14/mmm. The crystal structure of (Na0.3Sr0.7)(Ti0.7M0.3)O3 was a cubic with space group Pm3m, in which no tilting of oxygen octahedron was observed. The difference in the oxygen tilting of these two materials was due to the larger covalency of Nb-O bond than that of Ta-O bond, which induced a strong $\pi$Nb0 bonding in (Na0.3Sr0.7)(Ti0.7M0.3)O3. Therefore, the higher transition temperature of (Na0.3Sr0.7)(Ti0.7M0.3)O3 could be related to the larger tilting of oxygen octahedron.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.793-801
• /
• 1996

The effect of catalysts which was catalyzed by acid($HNO_3$) and base ($NH_4OH$) or not on the surface microst-ructures and consequent dielectric characteristics of the $PbTiO_3$ thin films prepared by sol-gel method were investigated. The result indicated that bse catalyst promoted the phase transformation of perovskite phase while acid catalyst was found to produce most uniform surface microstructure and improved dielectric properties However degradation of properties due to secondary phase formation and non-uniform microstructure at high annealing temperature (>75$0^{\circ}C$) by rapid diffusion of lead was unavoidable in any case as long as $Si_{(100)}$ \ $SiO_2$ \Pt substrate used.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.61-69
• /
• 2005

The topology of NPC inverter coupled with the large number of devices used increases the probability of device failure. It's necessary to develop an optimal remedial strategy which can be used to continue the application when fault occurs. The fault tolerance is obtained by the use of the proposed method. The proposed method utilizes that the one phase load with the failed power device could be connected to the center-tap of the DC-link capacitor in order to dc-link voltage with balance and the sinusoidal phase current with constant amplitude under the single power device fault condition. The strategy described in this paper is expected to provide an economic alternative to more expensive redundancy techniques.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.323-330
• /
• 2005

In order to increase reliability and reduce system cost, this paper studies particularly applicable method for sensorless PM BLDCM drive system. The waveform of the motor internal voltages(or back emf) contains a fundamental and higher order frequency harmonics. Therefore the third harmonic component is extracted from the stator phase voltage. The resulting third harmonic signal keeps a constant phase relationship with the rotor flux for any motor speed and load condition, and is practically free of noise that can be introduced by the inverter switching, making this a robust sensing method. In addition, a simple starting method and a speed estimation approach are also proposed. Some experimental results are Provided to demonstrate the validity of the proposed control method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.103-106
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression. In this paper, We studied on the Bio thin film by Langmuir-Biodgett(LB) method. The Experiment method used displacement current, $\pi-A$ isotherm and BAM (Brewster Angle Microscopy). using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.