• Membrane Journal
• /
• v.25 no.4
• /
• pp.343-351
• /
• 2015

In this study, we synthesis polyimide with high gas selectivity using 2,2-bis(3,4-carboxylphenyl) hexafluoropropane, 2,4,6-Trimethyl-1,3-phenylenediamine (DAM) and 4,4-Methylenedianiline (p-MDA), and then the asymmetric membrane was fabricated by non-solvent phase separation method. To confirm the property change of the membrane using different solvent, we measured and compared the viscosity of the polymer solution, cloud point and non-solvent phase separation coefficient. The morphology and gas separation property of membrane prepared by phase separation method was confirmed using Field Emission Scanning Electron Microsope and the single gas permeation measurement apparatus. The single gas ($CH_4$, $N_2$, $O_2$, $CO_2$) permeation property and selectivity value of the membrane prepared with NMP was higher than the membrane prepared with DMAc. We confirmed that the gas selectivity of the membrane increased and the permeation property decreased with increasing of the solvent evaporation time.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.253-258
• /
• 1997

The characteristics of crystal structure and phase transition with dopants ($Nb_2O_5$= 0.1~0.4 mol% and $Y_2O_3$ : 0.2~0.4 mol%) on the PTCR $BaTiO_3$ system were investigated. In the case of $Nb_2O_5$ additive, the lattice parameter of PTCR $BaTiO_3$ was changed linearly with the increasement of $Nb_2O_5$ which substituted B-site of BaTiO$_3$ and the lattice parameter of c-axis decreased abruptly at 0.3 mol%. These phenonmena were assumed to originate from the distortion of octahedron and we could confirm that the change of lattice parameter accorded with the characteristics of the phase transition temperature. $Y^{3+}$ ions substituted both of A- and B-site until the 0.3 mol% addition, but $Y^{3+}$ substitution preferred A- to B-site above 0.3 mol%. This was affirmed by the variation ,of lattice parameter and the characteristics of phase transition. It also was found that $Y^{3+}$ions in the A-site substituted both of $Ba^{2＋}$ and $Ca^{2＋}$ ions with equal ratio by Rietveld method.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.301-311
• /
• 1994

The growth of amorphous and first crystalline phase, and phase sequence by solid state reaction were examined in Co/Si multilayer thin films by DSC and XRD. The experimental results were compared with the results expected by effective driving force models, PDF and effective heat of formation models.Amorphous phase growth was not observed in Co/Si system and it was consistent with the predicted result by effective driving force. It was observed that the first crystalline phase is CoSi. According to the PDF and effective heat of formation models, the first crystalline phases were CoSi and $CO_2Si$, respectively. The experiemental results were coincident with the PDF model considering structure factors. In case of the atomic concentration ratios of 2Co : 1Si and 1Co : 2Si, the phases sequences were $CoSi\to Co_2Si$ and $CoSi \to Co_2Si \to CoSi \to CoSi_2$, respectively and it was analysized through the effective heat of formation model. The formations of CoSi, $CO_2Si$ and $COSi_2$ in initial stage were controlled by nucleation and the activation energies for the nucleation of three phases were 1.71, 2.34 and 2.79eV.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.213-222
• /
• 2019

Birnessite (birnessite, $7{\AA}$ manganate, ${\delta}-MnO_2$) is a major mineral comprising manganese nodule. Various synthetic methods have been studied and evaluated because it can be used as an ion exchange agent and a battery recharging material. However, it is difficult to obtain a single birnessite phase because it does not have a stoichiometric chemical composition. Feitknechtite (${\beta}-MnOOH$) is formed as an intermediate product during birnessite synthesis and in this study, the transition of this phase to birnessite was compared by using XRD and SEM. Two different methods, Feng et al. (2004) and Luo et al. (1998), based on redox reaction were used. It was possible to obtain the impurity-free birnessite for the sample aged 60 days at $27^{\circ}C$ by Feng et al. (2004) method and 3 days at $60^{\circ}C$ by Luo et al. (1998) method. The phase transition rate of the feitknechtite phase was slower in the case of $Mg^{2+}$ doped birnessite which was synthesized by Luo et al. (1998) method, and almost single phase almost single phase birnessite was identified at high temperature. Crystal surface and morphology also confirmed the difference between the samples synthesized by two methods.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.141-141
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.140-140
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.138-139
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.215-216
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.46-46
• /
• 2003

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.225-225
• /
• 1994

푸라본합성의 기초물질인 2-benzoyloxyacetophenone류를 dicyclohexyl-carbodi-imide/4-dimethylaminopydridine을 사용하여 72-90%의 수율로 합성하였다. 이들 에스터를 상전이촉 매존재하에 반응시켜 dibenzoylmethane을 합성하였다. 이때 얻은 수율은 72-80%로 종전의 방법에 비하여 월등이 개선되었으며 반응이 30분이내에 완결되었다. Dibenzoylmethane을 종전의 방법대로 폐환시켜 총 44종의 푸라본을 합성하였다.