• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.207-211
• /
• 2010

We have investigated the magnetoresistance effect in $Cr_5S_6$ single crystals prepared by vapor transport method. Room temperature X-ray diffraction (XRD) study reveals the phase formation of the single crystals with trigonal crystal structure. The magnetization was measured as a function of temperature (5 K~400 K) and applied magnetic field (0.1 T and 5 T). The magnetization curve as a function of temperature reveals the two transition states of $Cr_5S_6$: one from antiferromagnetic to ferrimagnetic state at ~150 K and the other from ferrimagnetic to paramagnetic state at ~300 K. Temperature dependent resistivity at 0 T and 5 T magnetic field shows the metallic behavior, showing the transition from antiferromagnetic to ferrimagnetic state at ~150 K. Magnetic field dependence of magnetization was measured at four fixed temperatures viz. 100 K, 150 K, 200 K, and 300 K. It is observed that at 200 K and 300 K it shows well M-H hysteresis behavior, whereas at 100 K and 150 K it shows non-hysteretic nature. A negative magnetoresistance (MR) of -2% is observed at 5 T for $Cr_5S_6$ single crystal at 150 K, near the antiferromagnetic transition temperature.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.150-168
• /
• 1991

A practical procedure for the ultimate compressive strength-based safety and reliability assessment of the double skin upper deck structure is described. The external compressive stress acting on the upper deck structure which is due to the still water and wave-induced sagging moment is approximately estimated by using the existing rule of classification society. The ultimate compressive stress of double skin structure under the action of sagging moment is analyzed by using idealized structural unit method. Here an idealized plate element subjected to uniaxial load is formulated by idealizing the nonlinear behaviour of the actual element taking account of the initial imperfections in the form of initial deflection and welding residual stress. The interaction effect between the local and global failure in the structure is also taken into consideration. The accuracy of the present method is verified comparing with the present solution and the existing numerical and experimental results for unit member and welded box columns. The safety of the structure is evaluated using the concept of conventional central safety factor and the reliability assessment is made by using Cornel's MVFOSM method. The present procedure is then applied to upper deck structure of double skin product oil carrier. The influence of the initial imperfections and the yield stress of the material on the safety and reliability of the structure is investigated.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.323-330
• /
• 2017

Knee sleeve has been used for prevention of sport injuries as well as rehabilitation. To investigate prevention of sport injuries of knee sleeve, it is important to evaluate balance associated with proprioception. The aim of this study was to evaluate the effects of a knee sleeve with a pad that stimulate to golgi tendon organ (GTO_PAD) on proprioception and balance ability. Five healthy males were participated for the study. They were asked to reenact target angle with Biodex and perform one leg standing with knee sleeve and knee sleeve with GTO_PAD. There was no significant difference in %Target angle, but the value of %Target angle was higher in subjects wearing knee sleeve with GTO_PAD than only knee sleeve, except for one subject. During one leg standing, time duration was increased in subjects wearing knee sleeve with GTO_PAD. The length of center of pressure in x-axis (COPx) and COP in y-axis (COPy) were decreased when wearing knee sleeve with GTO_PAD (COPx : $162.06{\pm}58.99mm$ in knee sleeve vs. $149.03{\pm}45.30mm$ in knee sleeve with GTO_PAD, COPy : $310.79{\pm}115.89mm$ in knee sleeve, $291.57{\pm}76.53mm$ in knee sleeve with GTO_PAD). There was significant differences in INI_transition, steady, and LAT_transition phase (all, p < 0.05). These findings support that wearing knee sleeve with GTO_PAD might enhance proprioception and balance.

• Journal of dental hygiene science
• /
• v.9 no.5
• /
• pp.579-586
• /
• 2009

Prior to the start of the general oral examination, this study was performed using the theory of planned behavior to provide data that would help not only increase intention of industrial workers' dental care utilization after their dental examination, but develop the follow-up oral health programs. As the first research group, 608 workers were selected from the 1016 workers while excluding both 53 workers who were currently undergoing dental treatment and 355 workers who had an opportunity to visit the dental clinic over the previous six months. Among the general characteristics that would influence the 608 workers' intention to utilize the dental clinic within one (1) month, their financial state showed that the higher their financial abundance level, the stronger their intention to visit the dental clinic(p<0.01). It was shown that the attitude toward the dental care utilization related behavior and subjective norm except the perceived behavioral control among the TPB variables had a significant effect on their intention(p<0.01). Among TPB variables, attitude toward the dental care utilization and subjective norm except the perceived behavioral control, were significant correlation with behavioral intention(p<0.01). The structure model's R-square of the attitude toward the behavior, subjective norm and perceived behavioral control having and effect on the intention accounted for 21%. In order to encourage the workers to have positive thoughts about the attitude toward their dental care utilization and subjective norm, therefore, it is required to perform the continued oral health programs, in addi1ion to oral health experts' regular education.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.395-401
• /
• 2010

A series of macrocyclic complexes of the type [M(L/L')$(NO_3)_n$].$mH_2O$ and [VO(L/L')($SO_4$)].$2H_2O$, where L/L' is a Schiff base "3,4,10,11-tetraphenyl/tetramethyl-1,2,5,6,8,9,12,13-octaaza cyclotetradeca-2,4,9,11-tetraene-7,14-dithione" derived from thiocarbohydrazide (TCH), benzilmonohydrazone (BMH)/diacetylmonohydrazone (DMH) and carbon disulphide, M = $UO_2$ (VI), Th(IV) and ZrO(IV), n = 2, 4, m = 2, 3, have been synthesized via metal ion template methods. The complexes are characterized on the basis of elemental analysis, thermal analysis, molar conductivity, magnetic moment, electronic, infrared and $^1H$-NMR spectral studies. The ESR and cyclic voltammetry studies of the vanadyl complexes have been carried out. The results indicate that the VO(IV) ion is penta-coordinated yielding paramagnetic complexes; $UO_2$(VI) and ZrO(IV) ions are hexacoordinated where as Th(IV) ion is octa-coordinated yielding diamagnetic complexes of above composition.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.347-354
• /
• 1994

The structural change and magnetic properties of mechanically milled Fe-N and Mn-Al alloy powders have been investigated by XRD, TEM, VSM, $M\"{o}ssbauer$ spectroscopy and inelastic neutron scattering measurements. During milling of ${\gamma}'-Fe_{4}N$ powders, and fcc ${\gamma}'-Fe_{4}N$ phase is transformed to a bct ${\alpha}'-Fe(N)$ phase by stress-induced martensitic transformation, being accompanied by an initial increase in saturation magnetization. During annealing the bct ${\alpha}'-Fe(N)$ nanocrystalline phase which is obtained by mechanical grinding for a long time, an ${\alpha}'-Fe_{16}N_{2}$ phase partially appears as an intermediate phase at 673~773 K, causing an increase in saturation magnetization. During milling of Mn-45, 70 and 85 at.% Al mixed powders, Al atoms are partially solubilized into an ${\alpha}-Mn$ phase. The Al supersaturated ${\alpha}-Mn-type$ phases change from paramagnetic to ferromagnetic : the saturation magnetization is 11 emu/g for the as-milled Mn-70 at.% Al powders. Moreover, by removing almost all Al atoms from the as-milled Mn-85 at.% Al powders using chemical leaching, the saturation magnetization increases up to 36 emu/g. The above bct ${\alpha}'-Fe(N)$ and ferromagnetic ${\alpha}-Mn$ type alloys are the magnetic materials found for the first time, by using the present mechanochemical process.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.417-424
• /
• 2002

컴퓨터는 인간의 모든 꿈과 희망을 실현시켜 줄 수 있는 마법상자는 아니다. 정보화 시대라고 일컫는 현재, 정보의 가치를 더해주는 컴퓨터의 중요성은 날로 커지고 있는 반면 인간의 존엄성은 경시되고 있다. 많은 사람들은 요즘 사회가 커다란 도덕적 위기에 빠졌다고 걱정하지만 컴퓨터 사용과 관련된 윤리적 문제에 대해서는 심각하게 느끼지 못하고 있는 것 같다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 이런 관점에서 본 논문은 정보통신 시대가 수반하고 있는 사회적 영향력과 윤리적 이슈들에 대하여 좀더 교육적인 측면으로 접근해 윤리교육의 현황과 문제점, 그리고 체계적인 확산방안에 대해 살펴보았다. 본 논문에서는 사이버공간에서 윤리 교육을 받는 청소년들을 중심으로 그들에게 새로운 윤리교육의 한 형태인 사이버공간에서 관련된 문제들을 교육적인 측면으로 해결할 수 있는 방안을 제시하고자 한다. 그러나, 무엇보다 우리가 명심해야 할 것은 인간의 존엄성은 그 어떤 이유를 막론하고 존중되어야 한다는 사실이다. 검증되지 않은 스토리 보드에 의한 저작 단계로 바로 돌입하고 있는 것이 한국의 실정이라 하겠다. 따라서 본 프로젝트에 의해 개발 된 교수 설계 도구는 교육/학습 컨텐츠의 품질 보증을 위한 방법론인 교육 공학의 체제적 교수 설계 이론 Model (Instructional System Design Model), 특히 그 중에서도 이 분야의 사실상의 표준 이론(de facto standard)인 Dick & Carey 교수와 Gagne 교수의 인지주의 ISD Model을 기반으로 정교한 교수 설계와 코스 맵 설계를 가능하게 함으로써 학습 컨텐츠의 품질 보증 활동을 지원 할 수 있는 도구로 개발하였다. 특히 Linux 기반에서 PHP로 개발 함으로써 Platform에 구애받지 않은 사용 환경을 구현 하였으며 향후 많은 e-Learning Platform에 교수 설계 모듈로 장착 함으로써 기존의 e-Learning Platform들의 가치를 높일 수 있는 계기가 될 것으로 생각한다.실징후를 파악하는데 그치지 않고 부실의 원인을 파악하고 이에 대한 대응 전략을 수립하며 그 결과를 측정하는데 활용될 수도 있다. 따라서 본 연구에서는 기업의 부도예측 정보 중 현금흐름정보를 통하여 '인터넷기업의 미래 현금흐름측정, 부도예측신호효과, 부실원인파악, 비즈니스 모델의 성격규정 등을 할 수 있는가'를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.429-436
• /
• 2010

Dyestuffs extracted from fifteen kinds of natural dyeing materials were researched on their antimicrobial performance against 3 kinds of bacteria and 2 kinds of fungi in order to develop conservation/storage materials of traditional and natural dyed papers. The three types of mordants were evaluated by using the same method and then mixed with the dyestuffs to research their antimicrobial performance. With those results, dyed paper was made by mixing mordants with 9 kinds of dyestuffs with excellent antimicrobial performance. Among the dyed papers, Cotinus coggygria, Coptis chinensis, Phellodendri amurense, Rhus javanica and Acer ginnala multiple mordant papers were found to have an antibacterial quality against fungi, while, in the insect repellent experiment using termites, Coptis chinensis and Phellodendri amurense dyed papers were found to have insect repellent qualities. Also, with regard to the research result about the affect of dyeing paper on other materials like metal, Coptis chinensis have relatively stable qualities. Also, the three types of dyeed paper by Cotinus coggygria, Coptis chinensis and Phellodendri amurense, were found to have a tendency to remove harmful gases. Not only can these dyed papers be used for making storage box for cultural properties to prevent various organic artifacts from bio-damaging, but they can also be utilized as functional finishing materials in various spaces.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.535-548
• /
• 2016

Hanging paintings are used for special ceremonies in Buddhist temple. They are stored in special storage box called "Gwaebulgwae" which means storage box for a hanging painting. Studies regarding pigments, background fibers and textiles of hanging paintings are carried out with many data in the field of conservation science. However, there are only few studies for the axes of hanging paintings and storage boxes. In this study, species identification for wooden axes of hanging paintings and storage boxes from the Joseon dynasty are carried out. Hanging painting of Beopjusa temple, Magoksa temple, Sudeoksa temple, Gaeamsa temple, Sudosa temple, Bukjangsa temple, Dorimsa temple, Tongdosa temple and Daeryeonsa temple are selected. Sampling is carried out from the axes of hanging paintings and storage boxes. 81 samples are collected from hanging paintings and storage boxes. As a result, 51 hard pines of Pinus spp., 8 Tilia spp., 6 Juniperus spp., 5 soft pines of Pinus spp., 4 Tsuga spp., 3 Pseudotsuga spp., 2 Berchemia spp., 1 Pyrus spp., 1 Bambusoideae are identified. Tsuga spp. and Pseudotsuga spp. might be used in conservation and restoration works in modern times because those species do not naturally grow in Korea. Most hanging paintings and storage boxes are made of hard pine. Also, some of are made of Tilia spp., because it represents the symbol of Buddha. Some unique kinds of trees used for wooden sculpture are identified, such as Juniperus spp. and Berchemia spp. Authentic conservation and restoration works could be carried out with this data-base.