• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.52-61
• /
• 2001

Cryogenic LNG(Liquefied Natural Gas) which is stored in the cylindrical storage tanks of $100,000m^3$ has very complex flow phenomena and the changes of thermal properties with exterior conditions and operation modes. These complex thermofluid behaviors are affected by the storage, exterior conditions of LNG, design specifications and heat transfer characteristics of tanks. Also, those have influence on the stable storage and supply of LNG in the storage tanks. Thus this study peformed the analysis on the 2-D heat transfer of the tank with exterior conditions, on the Cool Down Process in order to cool down the LNG Storage Tank at the initial normal state, and on the Filling Process considered for incoming and rising of LNG. The analysis on the Mixing LNG Storage was studied too. At last, the visualized program on the complex thermofluidodynamic analysis was developed on the basis of the above analyses. The development of this program becomes to be used to the basic design of the commercial tanks as well as to assure technical skill of the analysis on the thermal stability of the stored LNG in the LNG Storage Tank.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.233-236
• /
• 1994

To evaluate the emulsion stability indices of W/O emulsion system, we developed the simple and sensitive "VOLUMETRIC METHOD". This technique involved the first step of homogenizing the milk fat-water system with Ultra-turrax T25, then the volume of the added water phase was measured immediately. After quiescent incubation in test tubes at room temperature for a desired storage time, the bottom volume of the separated water layer was measured. And then "emulsion stability index(ESI)" was calculated by the following equation : $ESI=(1-V_s/V_a){\times}100$, where $V_a$ means the volume of the added water in the W/O emulsion and $V_s$ represents the volume of the separated water in the W/O emulsion for a desired storage time. The emulsion stability indices of W/O emulsion system at sorbitan trioleate, span 60, and tween 20 were $95.4{\pm}1.8$, $56.1{\pm}2.8$, and $41.6{\pm}2.2$ respectively. Furthermore, the differences between "VOLUMETRIC METHOD" and "Titus et al method" were less than 5.0 of ESI Value.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.1-5
• /
• 1991

This study was conducted to examine the effect of the addition of calcium acetate and/or potassium sorbate on the characteristics of kakdugi(Korean seasoned pickles of cubed radish roots) fermented at $20^{\circ}C$ for 4 days or more. The sensory characteristics, pH, titratable acidity, non-volatile organic acids and texture by Instron were measured. The results of sensory evaluation on kakdugi stored at $20^{\circ}C$ for 4 days indicated that firmness, toughness, crispness, sour taste and overall desirability were increased by the addition of calcium acetate. Potassium sorbate was evaluated to decrease the sourness. Titratable acidity, pH and the amount of non-volatile organic acids were higher in samples containing calcium acetate than in other ones. Compression test with Instron gave the similiar result to sensory evaluation in the measurement of firmness. Calcium acetate and potassium sorbate showed synergistic effect greatly on the textural characteristics on kakdugis.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.451-457
• /
• 2001

Because liquids with high molecular weight such as mineral oil have low vapor pressure at room temperature, it is generally thought to be difficult to lose them to evaporation. However, when they are dispersed into air in small droplets during application in machining processes, their surface area becomes considerably higher. To determine the potential for metalworking fluids (MWF) filter losses, MWF mist was generated and collected on polyvinyl chloride (PVC) filters in test chamber. After collected MWF was exposed to clean air during designated period (range 10~240 minutes) and the filters were desiccated, losses were evaluated. As duration of clean air passing through PVC filter increased, loss of MWF gradually increased. MWF lost after 10 minutes ranged form 12.4 % to 21.8 % of the original loading mass, on average 53.3 % of the total loss. These results indicate that significant mass of MWF collected on PVC filters can be lost at the beginning of air sampling. Loss of MWF collected on PVC filter also occurred during desiccation without active airflow. In multiple regression to identify which factors influence the loss of MWF collected on PVC filter, both duration of air passing through PVC filter and MWF age (fresh vs. used) were significant predictor (p=0.0001). Therefore, workers' exposure to MWF measured method 0500, may underestimate true concentration. Further study is needed to develop a new method to quantify the workers' exposure to airborne MWF mist accurately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.36-43
• /
• 2020

The extracts of antioxidants, torreya nucifera and alphinia henryi, were tested for properties as a fragrance material and applied to a mask pack formulation to study the fragrance properties. The DPPH antioxidant test of hot water and ethanol extract confirmed that the ethanol extract had superior antioxidant efficacy compared to the hot water extract. It was confirmed that the optimal mixing ratio as a raw material for the mask pack of torreya nucifera and alphinia henryi was 3:7 as a result of the DPPH antioxidant test. As a result of the cytotoxicity test, the cell viability was good as it showed 103.30% at 0.5 ug/mL, 104.25% at 1 ug/mL, 102.56% at 5 ug/mL, and 99.17% at 10 ug/mL compared to the untreated group. As a result of the patch test on the mask pack formulation, the skin irritation index of 0.02 was judged as a non-irritation product in the skin irritation primary stimulation human application test. In the evaluation of skin moisturizing, it showed a significant increase rate of 19.178% compared to before the sample adaptation. Evaluation of the change over time in the sheet mask pack formulation confirmed the formulation stability without viscosity and pH change for 12 weeks at low temperature(4℃), room temperature(25℃), and high temperature(45℃).

• Journal of Life Science
• /
• v.28 no.1
• /
• pp.90-98
• /
• 2018

Eggshell (ES) is a by-product of table eggs with high content of calcium carbonate which can be used as a calcium source in feed. In this study, we have first illuminated the potential application of ES as a novel carrier for probiotics. The carriers used in the study include a SBM (Soybean meal), ESL (Eggshell powder with large particles), ESF (Eggshell powder with fine particles), and the complex carriers (SBM+ESL, SBM+ESF). The structure of carriers absorbed by L. plantarum was confirmed by SEM image. Among these carriers, the complex carrier SBM+ESF showed the highest viability of L. plantarum with pH 7~8 during four weeks storage at room temperature. The SBM+ESF was further tested as a carrier for various probiotic strains at $4^{\circ}C$ or $30^{\circ}C$. All the probiotic strains showed high viability at $4^{\circ}C$ storage. However, a significant reduction of Lactobacillus cells was observed at $30^{\circ}C$ storage. B. lichenifomis maintained high viability whereas B. subtilis, B. amyloliquefaciens, and S. cerevisiae showed the reduction of $2{\log}_{10}$ (CFU/g). These results suggest that if the ESF as a calcium source in feed was mixed with SBM, it can be used as an effective complex carrier for improving the viability of some probiotics including B. licheniformis.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.923-928
• /
• 1993

The series of solid solutions in the $Sr_{1+x}Ho_{1-x}FeO_{4-y}$ (x = 0.00, 0.25, 0.50, 0.75 and 1.00) systems with $K_2NiF_4$ type structure have been prepared at 1550$^{\circ}$C under an atmospheric air pressure. The X-ray powder diffraction spectra of these samples assign that the crystallographic phases are tetragonal system over the whole x range. The lattice volume was increased with increasing the substitution amount of the $Sr^{2+}$ ion. The mole ratio of the $Fe^{4+}$ ion to total iron ions or ${\tau}$ value has been determined by Mohr salt titration of the sample and then the y value was calculated from x and ${\tau}$ values. The ${\tau}$ and y values have been increased with x values. The nonstoichiometric chemical formula are formulated from the general formula of $Sr_{1+x}Ho_{1-x}Fe^3_{1-}\;^+_{\tau}Fe_{\tau}^{4+}O_{4-y}$ replaced by x,${\tau}$ and y values. Mossbauer spectra show the mixed valence state and coordination state of $Fe^{3+}\;and\;Fe^{4+}$ ions. It is found out that the magnetic property of the samples is paramagnetic at room temperature. Electrical conductivity varied within the semiconductivity range of 1.0 to 1 ${\times}\;10^{-9}{\Omega}^{-1}cm^{-1}$. Activation energy of the electrical conductivity was decreased with the $\tau$ value. The conduction mechanism should be explained by the hopping model of the conduction electrons between the valence states of $Fe^{3+}\;and\;Fe^{4+}$ ions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.211-215
• /
• 2005

Three curcuminoids [curcumin (CUR), demethoxycurcumin(DEM), bisdemethoxycurcu in (BIS)] are major yellow pigments in turmleric (Curcuma longa L.) root. Contents of curcuminoids in turmeric roots collected from 6 locations were analyzed using, high performance liquid chromatography (HPLC) equipped with reversed-phase column, an UV-Vis detector at 420nm, and eluted with a mixture of acetonitrile: $0.1\%$ acetic acid in water (50 : 50, v/v) as mobile phase. The stability of curcuminoid pigments in $80\%$ methanol extract solution were investigated during storage in a freezer at $-20^{\circ}C$, room temperature in the dark, and light condition. Calibration curves for the determination of curcuminoids were made with significant linearity $(r^2=0.999**)$. Average content of total curcuminoids was 171.5 mg/g, with 91.6 mg/g of CUR, 56.9 mg/g of DEM, and 23.0 mg/g of BIS. Amount of curcuminoids during storage in a freezer was almost not changed while those in room temperature wert reduced and rapid degradation appeared after 60 days. Within 90 days, about $50\%$ curcuminoid decreased in the dark and about $70\%$ in the light condition, indicating the decomposition of curcuminoid pigments followed under light and heat.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.54-54
• /
• 1999

다이아몬드 합성시 질소 첨가는 Cn 화합물의 합성가능성을 비롯하여 다이아몬드의 질소 도핑, 성장 속도 및 결정성 변화 등 다양한 관점에서 중요한 의미를 가지고 있다. 본 연구에서는 다이아몬드의 일반적인 합성조건에서 질소를 첨가하여 합성된 막의 형상 및 상 변화에 대해 고찰하였다. 막은 다이아몬드 전처리시킨 Si 기판위에 microwave plasma CVD 장치를 이용하여 합성하였다. 유입되는 혼합가스(CH4+H2+N2)에서 N2 첨가량을 0-95%까지 변화시켰다. 이때 CH4 농도는 5%로 고정하였고, 합성온도는 90$0^{\circ}C$-115$0^{\circ}C$까지 변화시켰다. 이와 같이 합성된 막의 표면조직 및 성장 두께를 측정하기 위해 주사전자현미경을 이용하였다. 상의 분석은 Raman, XRD 및 TEM 분석을 이용하였으며, 조성분석을 위해 XPS 및 AES를 사용하였다. 질소 첨가량에 따라 합성된 막은 첨가하지 않은 경우에 다이아몬드 결정에서 시작하여 질소첨가에 따라 결정면이 깨지는 것으로 나타났다. 그러나 30%, 45%의 경우는 다시 결정면이 나타났다. 다량의 질소가 첨가되었을 때, 다시 결정면을 보이는 다이아몬드가 합성된 것은 매우 흥미로운 결과이다. 한편 질소와 메탄만의 기체하에서는 다시 결정면이 관찰되지 않았다. 이들 상의 구조는 XRD 및 TED 분석을 통해 모두 다이아몬드로 확인되었다. 기체내의 질소의 첨가에 관계없이 고상내에 질소는 확인되지 않았다. 따라서 이방법에 의한 CN 화합물의 합성은 힘든 것으로 보여진다. 이들 실험 결과를 근거로 온도 및 조성에 따른 기체의 열역학적 계산을 통하여 합성거동과의 연관성을 검토하였다. anode는 매우 높은 충전용량을 갖는데 첫 번째 방전시에 Li2O를 생성하여 비가역적 반응을 나타내고 계속되는 충방전 동안 Li-Sn 합금이 생성되어 2차전지의 가역적 반응을 가능하게 한다. SnO2 는 대기중에서 Li 금속보다 안정하기 때문에 전지의 제작 공정 및 사용 면에서 매우 우수한 물질이지만 아직까지 SnO2 구조적 특성과 전지의 충, 방전 특성에 대한 관계의 규명을 위한 정확한 정설은 제시되고 있지 못하다. 본 연구에서는 TFSB anode 물질로써 SnOx박막을 상온에서 여러 전도성 콜렉터 위에 증착하여 그 충, 방전 특성을 보고하였다. 증착된 SnOx박막의 표면은 SEM, AFM으로 분석하였으며 구조의 분석은 XR와 Auger electron spectroscope로 하였다. 충, 방전 특성을 분석하기 위하여 리늄 foil을 대극과 참조 전극으로 하여 EC:DMC=1:1, 1M LiPF6 액체 전해질을 사용한 Half-Cell를 구성하여 100회 이상의 정전류 충, 방전 시험을 행하였다. Half-Cell test 결과 박막의 구조, 콜렉터의 종류 및 Sn/O비에 따라 서로 다른 충, 방전 거동을 나타내었다.다. 거의 없었다. 5mTorr 일 때가 가장 좋았다.수 있음을 알 수 있었다. 그러므로, RNA바이러스의 하나인 BVDV의 viral replicon을 이용하여 다양한 종류의 포유동물 세포에 유전자 발현벡터로써 사용할 수 있음으로 post-genomics시대에 다양한 종류의 단백질 기능연구에 맡은 도움이 되리라 기대한다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(na