• Journal of Dental Rehabilitation and Applied Science
• /
• 제36권2호
• /
• pp.88-94
• /
• 2020

Purpose: The purpose of this study was to analyze the sagittal root position of maxillary anterior teeth and report the frequency of each classification in Korean for immediate implant placement. Materials and Methods: A retrospective review of cone-beam computed tomography (cone-beam CT) images was conducted on 120 patients (60 male and 60 female) who fulfilled the inclusion criteria. After reorientation of the axis, cone-beam CT images were evaluated and the relationship of the sagittal root position (SRP) of the maxillary anterior teeth to its associated osseous housing was recorded. Class I, II, and III were classified respectively when the root was positioned on the labial, central, and palatal aspect of the alveolar bone. Class IV was the position that at least two thirds of the root is engaging both the labial and palatal cortical plates. Then, the angulation of the root axis and the alveolar bone axis was measured. Descriptive statistics and Kruskal-Wallis test were used to compare the angulation according to the root position and SRP class. Results: The frequency distribution of sagittal root position of maxillary anterior teeth indicated that 81.1%, 10.3%, 1.9%, and 6.7% were classified as Class I, II, III, and IV, respectively. The sagittal angulation at approximately 77.5% of central incisor, lateral incisor, and canine was < 20 degrees, but the angle at more than 42.7% of canine was ≥ 20 degrees. Within the class, the angulation was statistically significantly greater in Class I (16.19) compared to Class II (8.72) and Class III (9.93), and smaller in Class IV (3.79). Conclusion: Within the limitation of this study, a majority of the maxillary anterior roots were positioned close to the buccal cortical plate. However, some roots have very thin alveolar bone and sagittal angulation larger than 30 degrees. Therefore, cone-beam CT analyses of the sagittal root position and the sagittal angulation are recommended for the selection of the appropriate dental implant treatment approach.

• The korean journal of orthodontics
• /
• 제35권1호
• /
• pp.35-42
• /
• 2005

There is lack of data for the amount of vertical bone in the midpalatal region for miniscrew implantation. The purpose of this study was to measure the structure of the midpalatal suture area using CT image and V-works 4.0 program (Cybermed Inc, Seoul, Korea). CT images of 14 male and 14 female adults were reconstructed. In detail, it was 1) to measure the length of maxilla on the midsagittal plane 2) to measure vertical bone height in the midpalatal area 3) to establish the zone of safety for miniscrew implantation. The following results were obtained. The mean length of ANS-PNS was 51.08mm in males and 47.34mm in females. There was a statistically significant difference between males and females (p<0.05). The vertical bone height of the midpalatal suture area was above 0mm except for 6mm posterior from the central Point of ANS-PNS in males The zone of safety was located 19.43mm posterior from the ANS in males while it was 17.62mm in females along the palatal plane. These results support that the safety zone of the midpalatal area is suitable for screw implantation. Midpalatal miniscrew implantation is a powerful tool in modern orthodontics Through many applications. it can expand the modern orthodontic field.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제37권4호
• /
• pp.512-518
• /
• 2010

The impaction of the maxillary permanent incisor is a common clinical problem and is mostly found at the "labial to the alveolar process." Surgical exposure and orthodontic treatment with fixed orthodontic appliances can be considered if normal eruption of the labillay impacted tooth is not expected. Surgical exposure of the impacted tooth, that is usually under the attached gingiva or is surrounded by alveolar bone through gingivectomy and removal of alveolar bone, may give a rise to complications such as diminution in the width of the attached gingiva, inflammation of the gingiva, and the loss of marginal alveolar bone. Therefore, closed eruption technique, which includes surgical exposure and orthodontic treatment with fixed orthodontic appliances followed by repositioning of surgical flap, is preferred. However, apically repositioned flap of the impacted tooth, which is beneath the movable submucosal area or is above the alveolar crestal area, can prevent unwanted exposures and facilitate successful tooth eruption. In this report, we described esthetic results of three patients with unerupted maxillary permanent incisor who were performed with an apically positioned flap without the loss of attached gingiva.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제36권4호
• /
• pp.232-241
• /
• 2020

Purpose: This study investigated the complications and patterns of implants that confronted with the extruded natural teeth. Materials and Methods: Among patients who received implant treatment between 2006 and 2018 at Chosun University Dental Hospital, only implants that had a maintenance period of at least 5 years and that both implants and confronting natural teeth could be measured and compared on a radiograph were selected. They were divided into two groups. Group 1, experimental group consisted of Implants confronting the extruded natural posterior teeth (n = 167: maxilla (Group 1max) = 92, mandible (Group 1man) = 75) and Group 2, control group consisted of Implants confronting the normal natural posterior teeth (n = 656: maxilla (Group 2max) = 272, mandible (Group 2man) = 384). Results: The incidence of complications between Group 1 and Group 2 was statistically significant. In particular, there was a statistically significant difference between the frequency of marginal bone loss and the amount of marginal bone loss. Conclusion: The extruded natural tooth may cause more frequent complications including bone resorption in the opposing implant.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제43권1호
• /
• pp.70-78
• /
• 2016

Many types of orthopedic appliances have been developed and used for the treatment of class II malocclusion in pediatric dentistry. Headgear is one of the extraoral appliances, which is used for the purpose of preventing the overgrowth of maxilla. Hotz appliance is used in couple with a cervical headgear for the expansion of maxilla and retraction of maxillary incisors. This case report is about the orthodontic treatment of three patients with class II division I malocclusion. These young patients were given orthopedic treatment in combination with a cervical headgear and Hotz appliance. After the treatment using these extraoral and intraoral appliances, succeeding treatments were practiced considering individual needs as follows: fixed orthodontic appliance for mandibular anterior crowding, Class II activator for retention and additory orthopedic treatment and the retention with Hotz appliance. Young patients with Class II division I malocclusion reported in this study received the orthodontic treatment using a cervical headgear and Hotz appliance as well as appropriate succeeding treatment afterward. All patients received improved convex profiles and lip protrusions by retracting maxilla and maxillary incisors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권2호
• /
• pp.29-39
• /
• 1989

Ossifying fibroma is a relatively slow growing tumor, and likely to have presented for some years before its clinical diognosis. The usually well circumscribed nature of ossifying fibroma in jaws lends itself to relative ease of excision and hence the favorable therapeutic results. On occasion, however, particulary in juvenile patient, if maxilla the tumor assumes an aggressive behavior. In that case, because the tumor grows invasively, resection with a margin of healthy tissue is indicated. The case presented is 34 - year old female. The patient had noticed a gradual swelling of the right side of the face approximately 2 months in duration correlation with a intermittent pain on the right maxillary molar area. Palpation disclosed firm swelling on the right anterior and lateral walls of the maxillary sinus extended to the maxillary tuberosity area. The radiographic examination revealed soft tissue mass with multiple dense round calcifications with destruction of anterior and posterolateral wall of the right maxillary sinus and right alveolar process, and hard palate. The mass totally obliterated maxillary sinus and extended to the pterygopalatine fossa. The histologic diagnosis from the biopsied specimen revealed ossifying fibroma. The tumor mass was resected by subtotal maxillectomy procedure due to a recent rapid infiltrative growth. In 5 months of postoperative follow - up period, the patient has favorable prognosis.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제35권4호
• /
• pp.244-252
• /
• 2019

Proper positioning of maxillary incisors is key to success of surgery combined treatment. Establishing surgery plan would be a difficult job if maxillary incisors are lost. Patient who lost all of her maxillary incisors due to accident came for orthodontic treatment. Through careful modification of maxillary archform, pre-surgical orthodontic treatment was conducted with four prosthetic space consolidation. Position of incisors was decided by help of 3D prosthetic set-up, and 1-jaw surgery was planned. After relative short treatment period of 28 months, final prosthesis was done. When alveolar bone loss happens, harmonious prosthesis of upper incisors is difficult. Utilizing mandibular set-back surgery and incisor positioning using 3D set-up could make a better environment for treatment outcome. Strategic pre-surgical orthodontic treatment can allow shorter time and less number of prosthetics.

• The Journal of the Korean bone and joint tumor society
• /
• 제10권2호
• /
• pp.142-146
• /
• 2004

Bizzare parosteal osteochondromatous proliferation is a rare lesion, tends to frequently recur. It was first described in 1983, when Nora and his colleagues reported 35 examples of a proliferative lesion involving small bones of the hand and the feet. It was regarded as occurring only in the small bones of the hand and the feet initially, but from then on, other authors have been reported cases including those involving long bones, skull and maxilla. We experienced a case of bizzare parosteal osteochondromatous proliferation which affects the humeral shaft in a 14-year-old male patient. Radiographs showed calcified mass measuring $4{\times}3$ cm in size and attached to the underlying cortex, which had a broad stalk base. Histologically, it showed hypercellular cartilage maturation to the trabecular bone and plump amount of fibrous stroma in the spaces around the bony trabeculae. Bizzare parosteal osteochondromatous proliferation is a relatively rare lesion, but has a recurrent behavior and histologically tends to be mistaken for malignancy. It can be treated by excision.

• The Journal of Korean Academy of Prosthodontics
• /
• 제49권3호
• /
• pp.222-228
• /
• 2011

Purpose: The purposes of this study were to evaluate the stress distributions and the displacements of obturator for edentulous maxillectomy patients and to compare them with those of complete denture using three-dimensional finite element analysis. Materials and methods: Based on the CT image of edentulous patient, three-dimensional finite element model of edentulous maxillae was constructed. Three-dimensional finite element model of edentulous maxillae with palatal defect was also fabricated. On each model, complete denture and obturator prosthesis were created. Vertical static force of 200 N was applied on the left maxillary premolar and molar region. The von Mises stress values and the displacements of models were analyzed using three-dimensional finite element analysis. Results: Maximum von Mises stress values were recorded in the cortical bones of both models. The von Mises stress value in the complete denture model was 2.73 MPa and 2.69 MPa in the obturator model. High von Mises stress values were also observed on the tissue surface of prosthesis. The maximum value of the displacement in the obturator was higher than that of complete denture. Conclusion: The obturator showed a worse result in terms of stress distribution and displacement than complete denture. In the prosthodontic rehabilitation of edentulous maxillectomy patient accurate impression procedure based on patients'anatomy and application of prosthodontic principle should be considered.

• The Journal of Korean Academy of Prosthodontics
• /
• 제46권2호
• /
• pp.193-200
• /
• 2008

Statement of problem: There have been a few studies about unsplinted implant retainted maxillary overdenture. Purpose: The purpose of this study was to examine the effect of different position of implant for 2 implants-retained maxillary overdenture. Materials and methods: Three-dimensional finite element models were used to reproduce an edentulous human maxilla with an implant-retained overdenture. Two implants in the canine tooth positions on both side and in the second premolar tooth positions on both side models were examined. Axial loads of 100 N were applied to the occlusal surface at the right first molar tooth positions. Maximum stress at the implant-bone interface and stress at the cortical bone surface just under the loading point were observed. Results and conclusion: Within the limits of this study, maximum stresses were concentrated around implant of canine position at loading side. The second premolar area was thought to be more favorable to distribution of stress on mucosa, alveolar bone and implants than canine area for maxillary overdenture.