• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.237-247
• /
• 2011

As of 2011, 72 Permanent GPS Stations are installed to control DGPS reference points by the National Geographic Information Institute in South Korea. As the center of the Earth's mass continues to move, the coordinates of the permanent GPS stations become inconsistent over time. Thus, a reference frame using a set of coordinates and their velocities of a global network of stations at a specific period has been used to solve the inconsistency. However, the relative movement of the permanent GPS stations can lower the accuracy of GPS relative positioning. In this research, we first analyzed the data collected daily during the past 30 months at the 40 permanent GPS stations within South Korea and the 5 IGS permanent GPS stations around the Korean Peninsula using a global network adjustment. We then calculated the absolute and relative amount of movement of the GPS permanent stations. We also identified the optimum renewal period of the permanent GPS stations considering the accuracy of relative GPS surveying. Finally, we developed a Korean a Korean crustal movement model that can be used to improvement of accuracy.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.421-424
• /
• 2003

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.355-363
• /
• 2007

The purpose of this study is to maximize the use of framework data by a method for updating road framework data using a economical, rapid, and accurate Vehicle-based kinematic survey to get the latest road data among "transportation framework data" which was built in 2003. We collected data using a Vehicle-based kinematic survey with DGPS (Differential Global Positioning System) in Daejeon and Pyeongtaek city and verified the accuracy of line and point features between surveying and previous results. The result showed that Daejeon city which is located near GPS CORS (Continuously Operating Reference Station)s and receive a signal well had lower errors than 1/5,000 digital base map, and Pyeongtaek city which is located far from the stations and receive a signal badly had errors beyond the limits. The study showed that postprocessing method or Total Station surveying should be used where signals cannot be detected well after analyzing a receiving rate from GPS CORSs, the stations of other organizations should be shared, and further studies are needed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.138-154
• /
• 2008

Geo-special technologies are being adopted in variety fields since the 3rd NGIS plan that was started at 1996. However, the required system or structure to guarantee the up-to-date validity and accuracy of the geospatial data - the most fundamental elements of the technology - was not constructed yet. All the activities related to geospatial data, including topographical map and numerical base map, are all implemented in separate way; from change of geographical objects and features, data gathering, and database construction to distribution, transfer and sharing of these data. The data model that links all the activities are required that enables consistent data-flow and effective and systematic work-flow. In this study, economic data renewal and exchange method was proposed, and benefit-cost analysis was implemented by comparing the conventional work-flow to newly proposed work-flow. The case study was implemented using the model that was adopted in Daegu metropolitan city, and the model was developed by reflecting these results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1571-1576
• /
• 2018

Recently, the attractive changes of mobile device are a improvement of the computing performance, dramatic improvement of storage capacity, constant connection to the internet, and sophisticated development of display technology. As a result, database applications utilizing mobile devices are emerging. These applications include databases for mobile servers, databases for edge computing, and fog computing. Therefore, it is important to pay attention to the current mobile database and pay attention to whether it has suitable performance for the applications. In this paper, the most common mobile database, SQLite3 is selected and experimented to test and understand the update performance and characteristics. The results of experiment are compared with the one of Oracle database at the same condition to evaluate the experiment. As a result, Insert Performance of SQLite3 has a lot of points to be improved and Update performance is very good. Especially, the performance of Range Query is excellent.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.115-125
• /
• 2017

In current, as the release of national base map with an equivalent scale and accuracy for the whole territory areas in South Korea, rapid spatial information industry such as national land development, GIS, and car navigation are used in a variety of spatial information industry as decision making method, and a lot of research and policies are proposed for the wide expansion of spatial information industry. For this, as of 2013, it contributes to the latest trend of spatial information field in order to solve the problems for the latest trend of spatial information, replacing modification of base maps as dividing the whole territory to zone with policy transformation by ordinary modifications. Therefore, this paper evaluates the possibility of modification and renewal of national base maps(scale: 1:5,000) using drones which currently get the limelight from a variety of research fields and industries. In particular, as a result of overlapping orthophoto, 3D point clouds extracted from images acquired by low-cost drones, and digital maps which are applied for the tasks of modification and renewal, it presents 0.2m precision and 0.1m accuracy. This means that drone-based photorgammetry technique can be fully utilized in the tasks of digital map modification and renewal because it conforms the error range of work regulation in making the national base maps(scale 1: 5000).

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.29-38
• /
• 2016

The maps produced by the NGII(geographical information institute) are composed of 1/1,000, 1/2,500, 1/5,000 large scale maps, 1/25,000, 1/50,000 and smaller scale maps. 1/1,000 digital map, as the most large-scale digital map made by the NGII, has been constructed with the beginning of NGIS(national geographic information System) Project in 1995. However, 1/1000 digital maps have been not produced by the fundamental survey on the basis of systematic planning at the national level, but a lot of parts have been constructed by the public survey for the purpose of the fiscal year of the local governments. Also, these maps have been not regularly updated because of big budget. In this study, we investigated problems related to the construction status, system, and area, and suggested plans that can improve these problems. As the improvement plan, we proposed a nationwide three regionalization for short-term modification and long-term regular update, reset of core downtown boundaries based on topographical features, diversification of budget execution method and an improved execution system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.389-398
• /
• 2002

As the necessity of land information has increased according to development of computer and Information-communication, people have been interested in the satellite measurement system that can update Cadastral and Geographical information rapidly and exactly. Most Cadastral base points which had limitation of measurement technology in the 1910s were less accurate and were destroyed through the Korean War. They also many problems in the process of reinstallation. So, they require the quick and correct method of measurement in re-equipment of a base point and a parcel based survey and so on. This study intends to present the GPS survey direction by understanding and analysing all sorts of problems rising in case of applying the GPS to cadastral area in order to increase the efficiency of the GPS measurement, and also develop the GPS kinematic survey program to apply to the efficiency of a kinematic survey. As a result of research, I could confirm the accuracy of Cadastral base points in Kwangju area by using Korea GPS array and a base point, and could get the result similar to existent cadastral survey result with the coordinate conversion program of Cadastral technology research institute. We however have to pay our attention to the transformation of the plane coordinates because the difference between tens of cm and the existing result can outbreak according to the Gauss conformal double projection method. And, I could figure out the practicality of the developed GPS kinematic survey program, compared with common use program. I expect that it can be applied to the digital cadastral survey and the cadastral map renewal as well.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.403-410
• /
• 2015

ADS-B can provide high accurate position information and faster update rate than Radar system and it is a technique that can supplement or replace the Radar. Recently ADS-B has been applied to the actual aircraft operation because to increase air transportation traffic and required to high accurate surveillance. In this study, we surveyed analysis of position deviation distribution analysis and received actual ADS-B trajectory data for conformed precise surveillance on the near airport area using ADS-B message. For that, we received the precision instrument approach ADS-B trajectory data using instrument landing system, and can analyse about target deviation distribution on the final approach segment about precision instrument approach. The result of analysis is mean distance of target deviation -0.04 m and standard deviation 6.71 m on between ADS-B target and extended runway centerline. Also that is to conformed the ADS-B message trajectory available to provide relatively exact surveillance information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.140-149
• /
• 2017

Recently, it has become necessary to consider climate change when managing multi-purpose river functions. However, in terms of domestic rivers, the management of national and local rivers is separated and the river information cannot be integratedly handled. Especially, it is not sufficient to collect and update information by recycling reports for design and construction. In addition, the basic information of the rivers is dependent on the GIS-based RIMGIS system, but the reliability of the information is deteriorating due to the construction of spatial information using the river basement planning results. The purpose of this study is to investigate the current status of the information system with regard to the maintenance and operation of the river facilities. Through the verification of actual cases, the optimal solution was suggested from the point of view of practical information. As a result, we constructed an information system for the reliable maintenance of river facilities and examined the integrated information management plan. The results of this study can be used to improve the existing information and technical and institutional procedures for the integrated maintenance and operation of river facilities. It will be helpful to introduce the BIM as well as solve to the information gap with other fields through the establishment of an information framework to improve the information construction of river areas.