• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.141-143
• /
• 2006

It is well known that there are three mechanisms in the nozzle surface regression, namely ablation, mechanical erosion and chemical corrosion. There are Analogies among these three mechanisms. In order to compare the order of the magnitude of these mechanism, the analogy was adapted and the Mach number of the gas flow was expressed by the nozzle shape(location).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.197-201
• /
• 2009

As one of the promising model on the multiphase fluid mixtures, the Lattice-Boltzmann Method(LBM) is being developed to simulate flows containing two immisible components which are different mass values. The equilibrium function in the LBM can have a nonideal gas model for the equation of state and use the interfacial energy for the phase separation effect. An example on the phase separation has been carried out through the time evolution. The LBM based on the statistic mechanics is appropriate to solve very complicated flow problems and this model gives comparative merits rather than the continuum mechanics model.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.25-34
• /
• 2011

Dredged and reclaimed ground in progress at the West Coast has a high content of coarse particles. There will be different behaviors depending on the location of outlet and engineering properties of soil when its ground is dredged by a pump. Therefore, the experiments were conducted that were manufactured about the chamber equipment of length 2,650mm, width 770mm, height 735mm, experimented step filling method and water content about 300%, 500% and 700% respectively with SM and ML samples in order to realize segregating sediment characteristics of dredged ground with changing much fine. With results of analysis, ML sample by higher initial water content was reached to the period of complete sedimentation and coefficient of sedimentation consolidation increased with increases of diffusion distance. SM samples showed behavior of coarse soil with diffusion distance 120cm, diffusion distance of more than 120cm showed a similar tendency with ML sample under the influence of fines. In ML sample, it could be also found that lower depth and the more increasing diffusion distance increase in percentage of sieve #200 but water content decreases. In SM sample, it could be also found that coarse soil was piled at near the diffusion distance zone but fine soil was piled at the far diffusion distance zone and prominent difference showed between percentage of sieve #200 and water content(%) by boundary point 120cm~160cm of both samples. Also, shear strength was expressed ML-maximum 2.97kPa, SM-maximum 10.2kPa with diffusion distance.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.372-380
• /
• 2007

Surface damage due to subsidence is an inevitable consequence of underground mining, which may be immediate or delayed for many years. The surface damage due to abandoned underground mine is observed to be two subsidence types such as simple sinkhole or trough formation to a large scale sliding of the ground from with in the subsided area. An evaluation of the risk of a subsidence occurrence is vital in the areas affected by mining subsidence. For a subsidence prediction or a risk evaluation, there has been used various methods using empirical models, profile functions, influence functions and numerical models. In this study, a simple but efficient evaluation method of subsidence hazard is suggested, which is based on a diffusion theory and uses just information about geometry of caving and topography. The diffusion model has an analogous relationship with granular model which can explain a mechanism of subsidence. The diffusion model is applied for the evaluation of subsidence hazard in abandoned metal and coal mines. The model is found to be a simple but efficient tool because it needs information of geometry of caving and gangway and the topography.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.3 no.3
• /
• pp.91-97
• /
• 1979

Boundary layer equations (partial differential equations) can be transformed to ordinary diffential equations with constant coeffieients in terms of similarity transformed to ordinary differential equations with constant coeffieients in terms of similarity transformations in the heat tranfer analysis on the surface of any axiaymmetric boiles. The azimuth functions can not be uniquely determined because of the singular behavior at the stagnation point(X=0.deg.).In spite of the azimuth functions behaving singularly, many of researchers have analyzed the heat transfer problem on a horizontal chlinder or a sphere, supposing the set of solutions( $H_{1}$ & G$_{1}$) of being yieled from the simple differential equation to be unique solution of therazimuth functions. In order to ascertain whether mathematical incompatibility as mentioned above can be admitted in the viewpoint of enginerring or not, condensation heat transfer coefficients on a sphere are computed for all azimuth functions( $H_{1}$ G$_{1}$ & $H_{2}$ G$_{2}$) and comparisons with the experimental result are discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.4
• /
• pp.310-318
• /
• 2004

For many industrial problems originating from aerodynamic noise, noise prediction techniques, reliable and easy to apply, would be of great value to engineers and manufacturers. General algorithm is presented for the prediction of internal flow-induced noise from quick opening throttle valve in an automotive engine. This algorithm is based on the integral formula derived by using the General Green Function, Lighthill's acoustic analogy and Curle's extension of Lighthill's. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve show good agreement with actual measurements. The results show that the dipole noise is dominant in this phenomena and the origin of noise sources is attributed to the anti-vortex lines formed in the down-stream from a throttle valve. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.131-145
• /
• 1986

흐름수역에서 연직상향으로 방류되는 평면부력\ulcorner의 거동이 연속방정식, 운동량방정식 및 추적물수송식의 기본방정식에 의하여 수치적으로 해석된다. 난류확산에는 Prandtld의 혼합거리이론을 도입한 난류수송모형이 이용된다. 수치해 과정은 기본방정식을 유함수(stream function)식, 와도수송(vorticity transport)식으로 변환한 후, \ulcorner방류속도와, 방류구폭 등으로 표현되는 변수와 흐름을 지배하는 무차원 매개변수를 도입하여 무차원 형태로 표현하는 부분과 successive under-relaxation과 Gauss-Seidel반복법으로 수행하는 부분으로 이루어진다. 적절한 relaxation 계수를 선정하므로써 안정되고 수렴성이 좋은 계산이 수행된다. \ulcorner방류 속도와 가로흐름 속도의 비가 속도비(Velocity ratio)로 정의되며 속도비가 8 - 15의 범위에서 부력\ulcorner으로 인한 주변흐름수역의 속도변화 온도상승범위, 흐름상태(유선) 및 와도가 조사되었으며 \ulcorner의 경로에 대하여 속도비와 방류밀도후르드수의 영향이 또한 조사되었다. \ulcorner중심선의 속도와 온도변화, 국부밀도후르드수의 변화가 구해지며 퍼짐율(dispersion ratio), 확산비(spreading rate)가 방류밀도후르드수, 국부밀도후르드수 및 방류구로부터의 경로의 항으로 해석되었다. 또한 속도와 온도 분포에 상사(similarity)가 존재함이 밝혀졌으며 본 연구와 같은 조건의 범위에서는 Gaussian분포를 이용한 적분형해석(intergal type analysis)이 가능한 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.303-303
• /
• 2015

하천에서의 유사이송은 하상의 변화를 야기 시키고 하천의 흐름특성에도 영향을 미치는 주요 현상이다. 유사이송은 하상을 구성하고 있는 모래나 점토질 입자가 물의 흐름을 따라 이동하는 것을 의미하는데, 유사 입자가 균일하지 않고 재질 또한 다양하여 입자에 작용하는 외부 힘을 계산하기 힘들기 때문에 유사 이송을 예측하기에는 많은 어려움이 있다. 이런 이유로 좀 더 확실한 유사이송량을 추정하기위한 많은 연구가 수행되고 있다. 본 연구에서는 1967년 Engelund와 Hansen에 의해서 개발된 공식을 이용하여 하상변동을 계산하였다. Engelund-Hansen 공식은 총유사량을 산정하는 과정에서 부유사량과 소류사를 구분하여 계산한다. 이 공식은 유사이송 함수를 유도하기 위해 수류력 개념과 상사원리를 이용하였다. 본 연구는 대상유역으로 금강 백제보 인근 10 km 구간을 선정하였고, 모의는 2014년도에 생산된 수문자료를 이용하였다. 유사이송은 대부분이 빠른 유속이 발생하는 홍수기에 집중된다. 그러므로 보다 정확한 하상변동을 파악하기 위해서는 홍수기를 포함한 장기간의 계산이 필요하다. 그러므로 본 연구에서는 모의기간을 365일로 결정하였다. 모의결과는 금강을 가로지르는 백제보가 하천의 흐름변화를 야기함에 따라 하류에서는 국부적인 세굴이 발생하는 것으로 나타났다. 특히 가동보 직하류에서 비교적 많은 세굴이 발생하였고 세굴 된 유사는 인근에 퇴적이 되고 있음을 알 수 있었다. 이런 국부적인 하상변동은 생태계의 불균형을 가져올 수 있으며, 하천구조물의 내구성을 약화시키는 요인으로 작용한다. 그러므로 이러한 재해를 예방하기 위해서는 하상변동의 예측이 필수적이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.107-114
• /
• 1989

Model pile pull-out tests have been executed to investigate the characteristics of the critical relative displacement at which the critical pile skin resistance is mobilized. Test result shows that the critical relative displacement is neither constant nor pile size dependent, but it is the most closely related with the magnitude of the critical skin resistance. The empirical relationship between the two quantities has been established. Behavior of centrifuge physical models of skin-resistance-related problems has been investigated on a quantitative basis by a computational method. A pile downdrag problem has been employed as an example of the skin-resistance-related problems. A simple transfer function type method has been developed for the analysis of the downdrag. It is concluded from the analysis that centrifuge physical modeling of skin-resistance-related problems may lead to an erroneous result on an unconservative side, as may have been expected due to the violation of the similarity rule by the quantity of the critical relative displacement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.387-396
• /
• 2008

An integration between construction CAD data and GIS data needs geo-referencing processes of construction CAD data whose coordinate systems are their own native or even unknown. Generally, these processes are based on manually detected conjugate-vertices. In this study, we proposed an semi-automated conjugate -vertices detection method for building features between construction CAD data and a digital map using a vertex attributed string matching algorithm. A geo-referencing function for construction CAD data based on the similarity transform could be derived with those conjugate-vertices. Using our proposed method, we overlaid geo-referenced CAD data to a digital map of the College of Engineering, Seoul National University and evaluated our method.