• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.48-56
• /
• 2004

This research focuses on the development of a fast datum transformation model to be used in GIS that utilizes real-time data transformation. Instance, when a GIS data constructed according to a datum is conformed to another datum, instead of transforming the axes of the original data, the data is transformed right before the results are reflected on the monitor. In this research, the prospects of calculating transformation parameters for every grid cells on the area based on two-dimensional conformal transformation model in order to decrease real-time datum transformation time while maintaining a high accuracy has been investigated. Research results showed that for a fixed area, the accuracies of the two-dimensional conformal transformation and the three-dimensional datum transformation, which requires more computing time, were almost equal and fast transformation speed, high accuracy real-time datum transformation is made feasible by implementing the grid-divided two-dimensional conformal transformation model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Communications of the Korean Mathematical Society
• /
• v.21 no.3
• /
• pp.409-417
• /
• 2006

자연현상의 복잡한 대상의 연구에서 출발한 프랙탈의 연구는 물리학에서 특히 열역학에서의 기법을 활용한 다중프랙탈의 연구로까지 그 영역이 확대되었다. 이 논문에서는 프랙탈과 다중프랙탈의 여러 가지 성질과 그 응용에 대한 최근 결과를 소개한다

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.121-134
• /
• 2013

The transverse cylindrical projection has been used in Korea since 1910s when the nationwide geodetic network was firstly established. However, the projection has a number of different types of functions according to a way of its mathematical derivation as well as a section of its coefficients and terms, for instance Gauss- Schreiber(GS) and Gauss-Kruger(GK) types. Although the transverse cylindrical projection itself is assigned to a system, projected coordinates would be diverse with respect to the function used in the actual calculation. In order to investigate impact of functions used in the computation, five different equations (i.e., 2 GS and 3 GK) were implemented in this study by using MATLAB. A series of numerical simulation tests has been carried out to compare and characterize them in terms of projection accuracy, difference of projected coordinates and distortion. Furthermore, a comparison between GS and GK function was made under the Korean gridding system, consisting of four zones. Results from the numerical computations were qualitatively analyzed and summarized in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.701-708
• /
• 2009

The flight control law of developed flight control computer(DFLCC) is developed based on operation flight program of advanced trainer aircraft full scale development final configuration. The flight control law design is used common use development tool in GUI(Graphic User Interface) environment. The flight control law transformed to C-Code is reflected in OFP. The OFP is verified by the standardized verification process. But, before standardized verification process, we need preliminary verification process such as similarity of flight control law and reliability of developed HILS. Similarity of flight control law is verified by comparing the aircraft response of advanced trainer aircraft and those of the developed control law. Also, reliability of developed HILS is verified by comparing the aircraft response of HILS and Non-real time simulation result. This paper verifies similarity of developed control law and reliability of HILS environment as comparing aircraft response.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.454-454
• /
• 2015

본 연구에서는 댐 유역의 설계홍수량을 산정할 시 발생할 수 있는 대표 매개변수의 불확실성에 대하여 분석하였다. 설계홍수량 산정 방법으로는 국내에서 가장 일반적으로 활용되고 있는 강우-유출모형 중 Clark 단위도를 활용하여 확률강우량을 동일 빈도의 홍수량으로 변환하는 방식을 적용하였다. 대상 유역으로는 수문학적 안전성평가가 수행된 국내 댐 유역 중 비교적 실측 호우사상 자료 수가 많은 3개 유역을 선정하였다. 또한 단위도 매개변수 결정 시 자료의 부족으로 최적화 매개변수에 대한 신뢰도 문제가 발생할 수 있으므로 가용 자료수가 증가함에 따른 불확실성의 영향을 분석하기 위해 대상 유역 간의 시간응답 특성을 분석하였다. 이를 통해 상사성이 있는 것으로 판단되는 유역의 호우사상 매개변수를 통합하여 무차원화된 저류상수 $K_x$를 구하였다. 이 $K_x$값을 표준정규분포로 변환하고 Monte Carlo Simulation을 통해 난수를 발생시켜 100개의 무차원 저류상수 $K_x$를 산정하였다. 이 값을 사용하여 설계홍수량을 산정하기 위한 대표 매개변수의 불확실성 분석을 실시하였다. 그 결과 상사성이 있는 것으로 판별된 유역의 호우사상을 통합하는 경우 양질의 호우사상을 다수 확보하고 있는 유역이 추가되면 홍수량 산정결과가 개선되는 것으로 나타났다.

• Journal of the KSME
• /
• v.32 no.6
• /
• pp.496-503
• /
• 1992

상사실험법(analogous experimental method)이라 함은 물리적현상을 다른 물리적현상으로 변환 하여, 후자를 실험적으로 측정하여 전자의 제반 물리량을 얻는 과정을 말한다. 이 때 두 물리량 사이에는 수학적 상사관계, 특히 미분방정식 상의 유사관계가 성립함을 전제로 한다. 일반적으로 임의형상의 내부응력을 실험적으로 해석하는 데는 탄소성 변위를 직접 전기적저항으로 바꾸어 측정하는 방법(strain gauge method)이나 광파의 간섭무늬(fringe)로 가시화하는 광탄성 법(photoelastic method), 또는 전자계산기를 이용하여 분할요소해석의 연계집적으로서 얻는 유 한요소법(F.E.M) 등이 널리 사용되고 있으나, 이들은 다같이 그 나름대로의 장단점을 지니고 있다. 전기저항식은 변형을 직접 측정할 수 있어 측정의 오차를 줄일 수 있고, 특히 실물측정과 동하중 해석에는 큰 강점이 있으나, 점해석(point by analysis)이기 때문에 전시야적인 분포를 파악하기 어렵다. 또한 광탄성법은 명료한 전시야적 분포를 얻을 수 있지만 모형해석(model analysis)이기 때문에 정밀한 모형제작의 어려움이 수반되며, F.E.M.(B.E.M.도 포함)은 복잡한 형상에서의 요소분할이 매우 어렵고, 경계조건의 정확한 설정에 문제가 있다. 따라서 여러 실험적 방법은 실측대상에 따라 그 장단점을 감안하여 선택되어야 하며, 이 글에서 논술하고자 하는 상사실험법에 의한 응력해석도 이러한 관점에서 지금까지의 일련의 연구결과를 종합하여 그 효 용적인 용도, 응용 및 그 전망과 더불어 장차 해결하여야 할 2,3의 문제를 제시하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.249-255
• /
• 2011

The free-stereo mosaics image without GPS/INS and ground control data can be generated by using relative orientation parameters on the 3D model coordinate system. Its origin is located in one reference frame image. A 3D coordinate calculated by conjugate points on the free-stereo mosaic images is represented on the 3D model coordinate system. For determining 3D coordinate on the 3D absolute coordinate system utilizing conjugate points on the free-stereo mosaic images, transformation methodology is required for transforming 3D model coordinate into 3D absolute coordinate. Generally, the 3D similarity transformation is used for transforming each other 3D coordinates. Error of 3D model coordinates used in the free-stereo mosaic images is non-linearly increased according to distance from 3D model coordinate and origin point. For this reason, 3D model coordinates used in the free-stereo mosaic images are difficult to transform into 3D absolute coordinates by using linear transformation. Therefore, methodology for transforming nonlinear 3D model coordinate into 3D absolute coordinate is needed. Also methodology for resampling the free-stereo mosaic image to the geo-stereo mosaic image is needed for overlapping digital map on absolute coordinate and stereo mosaic images. In this paper, we propose a 3D non-linear transformation for converting 3D model coordinate in the free-stereo mosaic image to 3D absolute coordinate, and a 2D non-linear transformation based on 3D non-linear transformation converting the free-stereo mosaic image to the geo-stereo mosaic image.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.399-411
• /
• 2003

An approach determining a confidence interval of Nash's observed mean instantaneous unit hydrograph is developed. In the approach, both two parameters are treated as correlated gaussian random variables based on the theory of Box-Cox transformation and the regional similarity relation, so that linear statistical parameter estimation is possible. A parametric bootstrap method is adopted to give the confidence interval of the mean observed hydrograph. The proposed methodology is also applicable to estimate the parameters of Nash's model for un-gauged basins. An application to a watershed has shown that the proposed approach is adequate to assess the uncertainty of the Nash's hydrograph and to evaluate parameters for un-gauged basins.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.59-64
• /
• 2001

The fluid flow, mass transfer and film thickness variation during a wafer spin coating process are numerically studied. Governing equations for the cylindrical coordinates are simplified using the similarity transformation and solved efficiently using the finite difference method. Concentration dependent viscosity and the binary diffusivity of the coating liquid are used in the analysis. The time variational velocity components of the coating liquid and the film thickness are analyzed according to the various spin speed. When the evaporation is considered, the flow decease in the early times due to the increase of the viscosity and the resultant flow resistance. Effects of the two film thinning mechanism, the flow-out and evaporation are also considered in the analysis.