• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.478-485
• /
• 2013

Fish field survey, especially fish distribution and their ecological characteristics, was performed in the downstream region of Gyeongan stream during the period of before (June) and after (October) the summer monsoon in 2010. Depending on the characteristics of each site, fyke net or casting net was used for fish sampling. Feeding classification was determined by the analysis of stomach contents. Total number of family and species sampled were 5 and 17, respectively. The dominant family was Cyprinidae (12 species), and relative abundance (RA) of the most dominant species, Lepomis macrochirus and Zacco platypus, was 38% and 24%, respectively. Exotic species and Korean endemic species observed were 3 (423 individuals, RA 44%) and 4 (98 individuals, RA 10%), respectively. Tolerance guild analysis as characteristics of ecological indicators revealed an undoubtedly high percentage (97%), compared to others as reflected by the identification of just one sensitive species. Analysis of trophic guilds showed that L. macrochirus dominated among insectivores (44% RA). The food of L. macrochirus composed of, aquatic insects, benthic invertebrates, zooplankton, Chironomidae, and waterweed. Thus, we determined that L. macrochirus could be classified as insectivores (partially carnivores) in this study. Conversely, Z. platypus consumed Cladocera exclusively, greater than 90% of their feed. We presume that stable isotope analysis would identify the exact position of these species in the food web.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.265-278
• /
• 2011

Effects of the open level of the side window were studied to control the temperature and relative humidity in the fog cooling greenhouse. The greenhouse was cooled by air atomizing spray nozzles of the air and water two-fluid process. The control process includes the measuring of environmental variables, setting and coding of the water balance equations and heat balance in greenhouse, calculating of the roof window open and spray water, and operating of the motor and pump. The target temperature and relative humidity were set at $28^{\circ}C$, 75%, respectively. The three modes of the side window open level were 0%, 50% and 100%. The average dry bulb temperatures of the inside air were 28.2, 27.2 and $26.3^{\circ}C$, respectively and their standard deviation was ranged from $0.4^{\circ}C$to $0.8^{\circ}C$. Also the relative humidity of the 0% mode was the best controlled one with the average of 76.3% and the standard deviation of 2.1%.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.285-296
• /
• 1999

Preloading method is used to prevent the settling of a foundation and to increase the strength of ground by consolidation settlement in advance. But, the embankment used in preloading method brings large deformation and sliding failure in the soft ground. Recently, reinforcement method is often used in embankment in order to prevent sliding failure. But, until now, the research on the stability analysis considering both the rate of strength increase of clay by embankment load and increase of resistance force by the geosynthetics in the embankment body is not found. In this study, the stability analysis program(REAP) for embankment including these two points is developed. By this program(REAP), the stability analysis can be done about during the gradual increase of embankment and the stability counterplan can be established when the safety factor is lower than allowable safety factor of design. After calculating the position of sliding failure surface, the force of geosynthetics which is selected by either the effective tensile strength or tensile force caused by the displacement of soil mass in this position is applied to stability analysis. And the increase of resisting moment can be calculated by this force. Also, the construction period can be estimated and the time for the appropriate counterplan can be decided in order to maintain the stability of embankment. And then, safe and economical embankment design can be performed.

• Journal of the Korean earth science society
• /
• v.35 no.2
• /
• pp.97-103
• /
• 2014

An isotopic hydrograph separation technique has been able to determine the contribution of new water (event water such as rain or snowmelt) and old water (pre-event water like groundwater) to a stream hydrograph for last several decades using stable water isotopes. It is based on the assumption that the isotopic compositions of both new water and old water at a given instant in time are known and the stream water is a mixture of the two waters. In this study, we show that there is a systematic error (standard error in the new water fraction) in the isotopic hydrograph separation if the average isotopic compositions of new water were used ignoring the temporal variations of those of new water. The standard error in the new water fraction is caused by: (1) the isotopic difference between the average value and temporal variations of new water; (2) the new water fraction as runoff contributing to the stream during rainfall or spring melt; and (3) the isotopic differences between new and old water (inversely). The standard error is large, in particular, when new water dominates the stream flow, such as runoff during intense rainfall and in areas of low infiltration during spring melt. To reduce the error in the isotopic hydrograph separation, incorporation of fractionation in the isotopic composition of new water observed at a point should be considered with simultaneous sampling of new water, old water and stream water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2017

Cobalt silicide was used as a counter electrode in order to confirm its reliability in dye-sensitized solar cell (DSSC) devices. 100 nm-Co/300 nm-Si/quartz was formed by an evaporator and cobalt silicide was formed by vacuum heat treatment at $700^{\circ}C$ for 60 min to form approximately 350 nm-CoSi. This process was followed by etching in $80^{\circ}C$-30% $H_2SO_4$ to remove the cobalt residue on the cobalt silicide surface. Also, for the comparison against Pt, we prepared a 100 nm-Pt/glass counter electrode. Cobalt silicide was used for the counter electrode in order to confirm its reliability in DSSC devices and maintained for 0, 168, 336, 504, 672, and 840 hours at $80^{\circ}C$. The photovoltaic properties of the DSSCs employing cobalt silicide were confirmed by using a simulator and potentiostat. Cyclic-voltammetry, field emission scanning electron microscopy, focused ion beam scanning electron microscopy, and energy dispersive spectrometry analyses were used to confirm the catalytic activity, microstructure, and composition, respectively. The energy conversion efficiency (ECE) as a function of time and ECE of the DSSC with Pt and CoSi counter electrodes were maintained for 504 hours. However, after 672 hours, the ECEs decreased to a half of their initial values. The results of the catalytic activity analysis showed that the catalytic activities of the Pt and CoSi counter electrodes decreased to 64% and 57% of their initial values, respectively(after 840 hours). The microstructure analysis showed that the CoSi layer improved the durability in the electrolyte, but because the stress concentrates on the contact surface between the lower quartz substrate and the CoSi layer, cracks are formed locally and flaking occurs. Thus, deterioration occurs due to the residual stress built up during the silicidation of the CoSi counter electrode, so it is necessary to take measures against these residual stresses, in order to ensure the reliability of the electrode.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.352-358
• /
• 1987

Rate constants for the hydrolysis of para-substituted phenyl N-(p-chlorobenzoyl)chloroformimidate (I) derivatives in 1 : 4 dioxane-water at $25^{\circ}C$ have been determined. Rate data, substituent effect $(\rho\>{\rho}^+)$, product analysis and MO calculation indicate that the uncatalyzed reaction proceeds through an $S_N1$ mechanism involving the formation of azocarbonium ion (II) below pH 3.0, and the base-catalyzed reaction proceeds through an $S_N2$ mechanism via transition state (III) above pH 4.0. The relative stability of four peri planar conformational isomers were (E-ap) > (Z-ap) > (E-sp) > (Z-ap), respectively, and the most stable stereo structures shows that the Y-substituted phenyl group $(C_6H_4-Y)$ occupy vertical $(90^{\circ})$ position on the plane of the benzimidochloroformyl group in (E-ap) conformer. The nucleophilic substitution of water molecule occurs by sigma attack to the activatived azomethine carbon atom of (I) derivatives.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.701-707
• /
• 1996

Xylanase(EC. 3. 2. 1. 8) was purified approximately 10.2 fold from Aspergillus niger SFN-416 by a sequential process of ammonium sulfate fractionation, Sephadex G-100 gel filtration and DEAE-Sephacel ion exchange chromatography. Molecular weight of the enzyme was approximately 31,000 daltons. The optimum pH and temperature of the enzyme activity were 3.5 and $50^{\circ}C$ respectively. The enzyme activity was enhanced by $Fe^{2+}$ and $Mn^{2+}$, and inhibited by $Hg^{2+}$. The activity was decreased by addition of methanol, ethanol, isopropanol and 1-butanol at a concentration of 10%(v/v).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.70-80
• /
• 2012

In Vehicular Ad-hoc Network(VANET) which constructs networks without fixed infrastructure among vehicles, network topology is frequently changed due to high mobility. In case of urban model, communication disconnections caused by interruptions of communication propagation such as buildings and constructions could be often occurred. Therefore, in VANET environment a routing protocol to complement its characteristics is needed. This paper suggests an algorithm to improve the transmission performance at intersections by approaching of the distance-based broadcasting which utilizes the information of vehicle's position. By using relative velocity among vehicles, it makes the stability of route decision improved and reduces packet collisions through graded priorities in the intersection, and simultaneously improves the performance of data rate. It can be seen that the performance compared with previous algorithm is significantly improved when using the suggested algorithm in the urban traffic environment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.3-12
• /
• 2001

This paper presents the proposed methods of DE (distinct element) modelling to estimate the stability of tunnels in jointed rock masses. First, the criterion to select the joint set(s) contributed to the discontinuous behaviour in a tunnel section is proposed. Selected joint set(s) is(are) considered to form the edges of distinct elements (rock blocks) and the others to modify the elastic properties of rock blocks. The complex DE model with the average and the deviation of joint orientation and joint length for each joint set was compared to the simple model with only the average of joint orientation and the assumption that joint length is infinite. As a result, the latter is suitable to the purpose of tunnel design because it can show the consistent behaviour of a jointed rock mass such as the locally discontinuous failure and the global anisotropic behaviour.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3494-3499
• /
• 2009

The stability of omeprazole in the aqueous solutions containing loxoprofen or Sodium bicarbonate was examined at room temperature. Loxoprofen or Sodium bicarbonate (60 mg) was added to omeprazole (600 ${\mu}g$/ml) solution to check the stability profile. Then, the solution was kept at room temperature for 80 hours. The concentration was assayed at each concentration by stability-indicating High performance liquid chromatography (HPLC) method. Aliquots of the solution were withdrawn at specified time intervals and assayed by chromatographic analysis for intact omeprazole. The relation between omeprazole concentration and peak area was linear from 5 to 160 ${\mu}g$/ml. The analysis method was precise with relative standard deviation (% RSD) no greater than 3.05 %. The remaining percentage-time curves revealed that omeprazole was degraded rapidly as functions of time and temperature following pseudo first-order kinetics. In conclusion, the stability of omeprazole was significantly affected by liquid solutions mixed with alkalizer (Sodium carbonate) or the NSAIDs (loxoprofen).