• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.287-294
• /
• 2011

Peer assessment is an educational valuation system that involves studying with a colleague and granting value to the progress made by the colleague. Although this method has many merits, there is also a drawback pertaining to calculating the mean of the scores that were granted to the levels of contribution. However, this has been improved upon by a diversified study. However, the concept of the chi-square test and p-value used in the preceding study is not easy individuals engaged in the industrial engineering field or education when using peer assessment. This study uses simple statistics like standard deviation, in addition to, investigating the availability of a suggested method as well as examples of utility and application. This study can contribute to increase the convenience of users through the use of convenience analysis and with this method.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.161-167
• /
• 2007

In this study, ultimate lateral load capacity of piles is analyzed with consideration of lateral stress effect. Based on results obtained in this study, a method for the estimation of ultimate lateral load capacity is proposed. This makes it possible to more realistically estimate the ultimate lateral load capacity under various stress states caused by in-situ soil condition and pile installation process. Calibration chamber test results with various soil conditions were used in the analysis. From the test results, it was found that effect of the lateral stress was greater than that of the vertical stress on the ultimate lateral load capacity of piles. It was also found that, as the relative density increases, displacements required to reach the ultimate state increases, showing relative displacements of around 14% and 18-25% for $D_R$ : 55% and 86%, respectively. Based on results obtained in this study, a methodology for the estimation of ultimate lateral load capacity of piles using correction factors was proposed. Results from proposed method matched well measured results.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.262-266
• /
• 2011

본 연구에서는 건축물 내장 재료에 대한 연소독성평가와 독성지수연구로써 FT-IR을 이용한 연소가스분석실험을 하였다. 독성지수를 산정하기 위한 실험의 화재모델로 콘 칼로리미터 화재모델(KS F ISO/TR 9122-4)을 사용하였으며 ISO 19702의 절차에 따라 FT-IR을 이용하여 건축 재료의 연소로부터 발생되는 가스의 분석을 수행하였다. 국제규격에서 제시하고 있는 몇 가지 독성지수 산정법 중 ISO 13344에서 규정하는 방법에 따라 FED 값을 산정하였으며, 30분간 시험동물에 노출 시 대상의 50%가 사망하는 농도인 $LC_{50}$을 기준으로 하여 3가지 재료의 독성지수화를 통해 상대적인 독성 위험도를 평가하였다.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.229-233
• /
• 1990

The thermal analysis method has been proposed for the evaluation of the relative qualities of different ginger oleoresin samples and discussed to demonstrate its simple applicability. TGA measurement to compare characteristics of ginger oleoresins give more sensitive indication on the thermal decomposition than that of DSC. The results show that the quality of oleoresin obtained from sliced sun dried ginger is better than that from hot air dried whole ginger.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1206-1210
• /
• 2010

본 연구에서는 분포형 강우와 면적평균강우의 적용에 따른 유출해석 결과의 분석을 위해서 물리적 분포형 모형인 HyGIS-GRM을 이용하여 유역 대부분이 산지로 이루어져 있는 낙동강 위천 유역을 대상으로 유출모의를 수행하였다. 강우자료는 지상 강우관측소의 지점강우 자료를 이용하여 생성한 면적평균강우와 면봉산 레이더 관측소 강우 자료를 조전부합성법으로 보정한 분포형 강우자료를 이용하였다. 위천 유역의 무성수위관측소와 미성 수위관측소 지점에 대해서 유출모의를 수행하고 관측 수문곡선과 비교하였으며, 면적평균강우과 분포형 강우가 GRM을 이용한 유출모의에 미치는 영향을 평가하였다. 연구결과 분포형 강우를 이용한 경우가 면적평균강우를 이용한 경우에 비해서 첨두유량, 첨두시간, 총유출량에서 상대오차가 감소하는 경향을 나타내었으며, 따라서 물리적 분포형 모형을 이용한 유출모의시 분포형 강우는 면적평균강우에 비해서 실제의 강우현상을 좀 더 잘 유출해석에 반영할 수 있는 것으로 평가되었다.

• Journal of the Korean Chemical Society
• /
• v.40 no.3
• /
• pp.196-201
• /
• 1996

The analysis of trace cadmium in blood by using 10 folds diluted samples with 1% Triton X-100 and Fork platform tube at the ashing temperature of 500$^{\circ}C$ has been performed by GFAAS. In this study, good analytical results were obtained from peak area and peak height methods. The detection limits of SH and $D_2$ arc background correction are 0.02 ng/mL and 0.01 ng/mL, respectively. Relative standard deviation is within 5% at the level of 1.0 ng/mL.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.117-123
• /
• 1998

We investigated the effect of mechanical backside damage in Czochralski grown silicon wafer. The intensity of mechanical damage was evaluated by minority carrier recombination lifetime by laser excitation/microwave reflection photoconductivity decay method, photo-acoustic displacement method, X-ray section topography, and wet oxidation/preferential etching methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the photo-acoustic displacement values increased proportionally, and it was at Grade 1: Grade 2:Grade 3 = 1:19.6:41 that the normalized relative quantization ratio of excess photo-acoustic displacement in damaged wafer was calculated, which are normalized to the excess PAD from sample Grade 1.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.405-416
• /
• 2018

In this research, the distribution of Platinum Group Elements (PGEs) at roadside dust in Daejeon, Korea was examined using an ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) technique. For the quality assurance of the determination, method validation based on its accuracy and precision was conducted using SRM (Standard Reference Material). It was found that the relative errors of Pt, Pd, and Rh against each SRM value were -0.7%, -10.0%, and -20.4%, respectively, while relative standard deviations for three elements were less than 10%. The concentrations of Pt, Pd and Rh in roadside dust averaged as $17.4{\pm}9.2{\mu}g/kg$, $283.6{\pm}20.5{\mu}g/kg$, and $7.3{\pm}2.8{\mu}g/kg$, respectively. The concentrations of Pt and Rh have significantly higher distribution patterns in the dust at roadside and underground parking lot than those in soil of the background or other urban area. The correlation analysis between concentrations of PGEs in roadside dust indicates that the distribution of Pt and Rh concentration were strongly affected by automobile sources.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2015

This paper presents a new formulation for transient simulations of microwave propagation in heterogeneous unbounded domains. In particular, perfectly-matched-layers(PMLs) are introduced to allow for wave absorption at artificial boundaries used to truncate the infinite extent of the physical domains. The development of the electromagnetic PML targets the application to engineering mechanics problems such as structural health monitoring and inverse medium problems. To formulate the PML for plane electromagnetic waves, a complex coordinate transformation is introduced to Maxwell's equations in the frequency-domain. Then the PML-endowed partial differential equations(PDEs) for transient electromagnetic waves are recovered by the application of the inverse Fourier transform to the frequency-domain equations. A mixed finite element method is employed to solve the time-domain PDEs for electric and magnetic fields in the PML-truncated domain. Numerical results are presented for plane microwaves propagating through concrete structures, and the accuracy of solutions is investigated by a series of error analyses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.639-645
• /
• 2015

Recently, a study on the commercialization of Rope type Platform Safe Door (RPSD) technology has commenced. The study focuses on RPSD, in which a rope screen ascends to allow safe passage from the platform to the transit vehicle in aboveground stations. Currently, a pilot installation has taken in place with Daegu Metro Line 2 in MoonYang station starting from March of 2013. However, there is a need to select an appropriate pilot installation's object for the improvement in the future RPSD. An appropriate designation would correspond with the needs of the railroad corporation and as a historic railway platform with safe facilities. This study tried to usa Analytic Hierarchy Process (AHP) to determine the priority of the KTX stations to attain a list of appropriate designations for future RPSD installations by analyzing the followings: management of the facilities, operational risks, and intent of business projects. As a case study, it was applied to the evaluation of the KTX stations. For the application, it used relative measurement to calculate the weight of upper level structuring, and absolute measurement for low level structuring instead of pairwise comparisons.