• Journal of Soil and Groundwater Environment
• /
• v.14 no.2
• /
• pp.33-44
• /
• 2009

The objective of the study was to develop a hybrid technology integrating biological and physicochemical technologies to efficiently remediate arsenic contaminated lands such as abandoned mine area. The tailing soil samples contaminated with As at a high level were obtained from Songchon abandoned mine, and the content of arsenic and heavy metals as well as physicochemical properties and mineral composition were investigated. In addition, two sets of sequential extraction methods were applied to analyze chemical speciations of arsenic and heavy metals to expect their leachability and mobility in geoenvironment. Based on these geochemical data of arsenic and heavy metal contaminants, column-type experiments on the bioleaching of arsenic were undertaken. Subsequently, experiments on the hybrid process incorporating bioleaching and electrokinetics were accomplished and its removal efficiency of arsenic was compared with that of the individual electrokinetic process. With the results, finally, the feasibilty of the hybrid technnology was evaluated. The arsenic removal efficiencies of the individual electrokinetic process (44 days) and the hybrid process incorporating bioleaching (28 days) and electrokinetics (16 dyas) were measured 57.8% and 64.5%, respectively, when both two processes were operated in an identical condition. On the contrary, the arsenic removal efficiency during the bioleaching process (28 days) appeared relatively lower (11.8%), and the result indicates that the bioleaching process enhanced the efficacy of the electrokinetic process as a result of mobilization of arsenic rather than removed arsenic by itself. In particular, the arsenic removal rate of the electrokinetics integrated with bioleaching was observed over than 2 times larger than that obtained by the electrokinetics alone. From the results of the study, if the bioleaching which is considered a relatively economic process is applied sufficiently prior to electrokinetics, the removal efficiency and rate of arsenic can be significantly improved. Consequently, the study proves the feasibility of the hybrid process integrating both technologies.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.975-984
• /
• 2005

This study fulfilled to investigate the feed efficiency, tissue selenium distribution, carcass characteristic and economic value in finishing Hanwoo steers fed organic selenium mix (OSM) which included seleno-yeast, rumen culture and other microbial supplements. Forty five finishing Hanwoo steers were tested for 4 months dividing to three feeding groups: OSM add as 0.5 ppm Se of DM feeds (0.5 ppm OSM), OSM enriched add as 1.0 ppm Se of DM feeds (1.0 ppm OSM) and basal diet without OSM (control). The total weight gains, the average daily gains and the feed intakes were not differ in treatments (p > 0.05). No differences (p > 0.05) were noted for hot carcass weight, loin eye area, backfat thickness, meat yield index, meat color, fat color, tenderness and maturity. However, the 1.0 ppm OSM showed better performances for feed requirement, TDN per gain, meat yield grade and meat quality grade compared to other groups. Tissue selenium distribution was increased by organic selenium feeding: higher Se concentration in liver and rump of 0.5 ppm OSM (p < 0.05), and kidney, liver, sirloin and rump of 1.0 ppm OSM (p < 0.05) than the tissues of control group. Generally, tissue selenium was the highest value in 1.0 ppm OSM and showed higher concentrate in order; kidney, liver, sirloin and rump. The income over feed cost was 1.06-fold higher in 1.0 ppm OSM than control group. In conclusion, organic selenium mix supplementation and its amounts were not influenced to feed intake, body gain and carcass characteristic but significantly increased tissue selenium. Therefore, these results suggest that finishing Hanwoo steer fed an enriched organic selenium mix with proper probiotics is able to produce “high-Se” beef as high bioavailable form as well as create a beneficial opportunity on Hanwoo farm.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2011

More than sixty percentage of highway in South Korea were constructed by concrete pavements and more than half of the concrete pavements were twenty years or older. Maintenance and rehabilitation of aged cement concrete pavements required early transportation opening due to difficulty of preparing bypass roads, given South Korea's transportation condition and so far, mostly asphalt concrete overlay has been used. However, asphalt concrete pavement maintenance and rehabilitation is costly because of early damage and at the same time, it causes inconvenience to the road users. Recently, as an effective method of rehabilitation for aged cement concrete pavement, bonded concrete overlay is being attempted. Therefore, utilizing various data on year-by-year basis is needed to rationally analyze of the damage on asphalt concrete overlay and bonded concrete overlay is necessary. However, in South Korea database of Serviceability damage on asphalt concrete overlay and bonded concrete overlay does not exist. In this research, performance is evaluated by the LTPP (Long Term Pavement Performance) Data of U.S.A, which accumulated various damage data of asphalt concrete overlay and bonded concrete overlay. However, the pattern distress of asphalt concrete overlay and bonded concrete overlay are different. Therefore, the pavement distress data of each section is collected into database and distress are calculated PCI(Pavement Condition Index) in order to compare life of asphalt concrete overlay and bonded concrete overlay.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.281-290
• /
• 2016

Thin film composite (TFC) polyamide membranes were prepared on polysulfone (PSF) supports for forward osmosis (FO) applications. To understand the influence of polarity and porosity of support layer on the formation of polyamide structure and the final FO performance, clathochelate metal complex (MC) contained PSF supports were prepared via the phase inversion process from various PSF casting solutions containing 0.1-0.5 wt% of MC in dimethyl formamide (DMF) solvent (18 wt%). A crosslinked aromatic polyamide layer was then fabricated on top of each support to form a TFC membrane. For the porous PSF supports prepared with relatively low concentration casting solutions (12 wt%), the PET film was removed after phase inversion and crosslinked aromatic polyamide layer was then fabricated. The tested sample from PSF (18 wt%)/MC (0.5 wt%) casting solution presented outstanding FO performance, almost similar water flux (9.99 LMH) with lower reverse salt flux (RSF, 0.77 GMH) compared to commercial HTI FO membrane(10.97 LMH of flux and 2.2 GMH of RSF). By addition of MC in casting solution, the thickness of the active layer in FO membranes was reduced, however, the increased RSF value was obtained.

• Journal of Information Technology and Architecture
• /
• v.11 no.3
• /
• pp.359-369
• /
• 2014

This paper aims to analyze the change of dominion in Russian automotive market and Korea port to export cars to the Russia. First, we provide the current market structure and growth potentials of Russian automotive industry by using literature reviews and data survey. Next, we analyze the current situation to export cars through the Korean seaports using the BCG (Boston Consulting Group)'s matrix method. The analysis shows that the Russian car market has growth potential. The result of expectation of Russian major car export's port within 3~5 years since the year 2013 shows that the Pohang Port will maintain current market share because it has higher market share and growth potential. On the contrary, the Guangyang Port, Busan Port, and Ulsan Port will lose the market share because of the low growth potential. Also, the Incheon Port will become the cash cow market because it has more than 10 percent market share and higher growth potential. To increase the car export volume of ports to Russian market, this paper proposes that we should provide a differentiated service to Russian port based on the analysis of domestic or foreign car export logistics structure and flow. For further study, EA-based framework should be applied for efficient and effective policies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.28-38
• /
• 2009

In this study, a remote air quality monitoring system for underground spaces was developed by using NDIR-based CO$_2$ sensor. And the remote monitoring system based on wireless sensor networks was installed practically on the subway station platform. More than 6.5 million citizens commutate everyday by the Seoul subway transportation that is the most typical public transportation. They concern about air quality with increasing interest on public health or many workers in subway stations or underground shopping centers. Recently, the Korean Ministry of Environment has operated the air quality monitoring system in some subway stations for testing phase. However, it showed many defects which are large-scale, high-cost and maintenance of precision sensors imported from abroad. Therefore this research includes the reliability test and a theoretical study about the inexpensive commercialized CO$_2$ sensor for reliable measurement of air quality which changes rapidly by the surrounding environments. And then we develop the wireless sensor nodes and the gateway applied for remote air quality monitoring. In addition, web server program was realized to manage air quality in the subway platform. This result will be valuable for a basic research for air quality management in underground spaces for future study.

• The Journal of Aerospace Industry
• /
• s.68
• /
• pp.80-94
• /
• 2006

유효경쟁시장은 사업자의 수와 시장구조 측면에서는 독과점적인 시장이더라도 기존사업자간 경쟁이 상당히 치열하거나 잠재적 진입에 의한 경쟁압력이 커서 특정사업자가 시장지배력을 보유하거나 이를 행사하기 어려운 시장상태를 말하며, 항공산업의 경우 일반적인 네트워크 산업과 마찬가지로 대규모 설비투자가 필요하고 높은 고정비용과 규모의 경제가 뚜렷한 특성을 갖고 있으며 네트워크효과도 강하게 나타나 비대칭적 규제가 필요한 대표적인 산업이라고 할 수 있다. 우리나라 경제당국은 평균비용이 장기적으로 하락하는 대규모 자본산업에서 자연독점이 발생할 경우, 그 피해는 자연히 소비자에게 돌아 갈 것이며, 미국과 EC의 경쟁법상의 유효경쟁의 개념으로 제시되고 있는 요소들을 보면 주로 어느 한 기업이 시장지배력을 행사하는 시장상황을 나열하여 규제함으로써 최대의 이익이 소비자에게 돌아가도록 규제하고 있다. 항공운송사업은 자본집약적 서비스산업으로 일반서비스 산업에 비해 상대적으로 일정수준까지 자본투자가 전제되어야 하는 자본집약적 특성을 지닌다. 따라서 항공운송산업의 성패는 대규모 자본을 통한 운송능력에 대한 효율화 정도에 따라 결정된다. 여기에 시장에 진입 시기와 독점 유지기간도 중요한 역할을 한다. 또한 항공운송산업은 정부의 면허사업으로 선발항공사가 수익노선을 선점하여 운항할 경우, 정부의 별도 허가에 의하여 복수취항이 이루어진다고 하더라도 운항편수 및 고객 선호 시간대를 미리 선점할 수가 있어 후발항공사에 비해 우월적 지위를 갖게 되어 공정경쟁이 극히 어렵다고 할 수 있는데, 이는 수십년간 아시아나의 압도적인 서비스/안전에 대한 높은 평가에도 불구 대한항공과 아시아나의 격차는 2000년 이후 일정하게 유지되고 있다는 점에서 확인할 수 있다. 국내 항공운송산업은 면허산업으로, 운수권의 확보에 따라 항공사의 매출 차이가 결정되는 바, 항공운송산업에서의 유효경쟁을 확보는 1차적으로는 정부의 운수권 배분을 통하여 실현되며 양사의 운수권 배분내역에 의하면 선발사업자에 대한 유효경쟁정책이 실현되지 않고 있다고 할 수 있다. 대부분의 노선에서 복수취항이 허용된다고 하더라도 강력한 스케줄, 가격(운임) 경쟁력, 선발항공사의 이점, 고객 선호도의 미반영 등으로 인하여 공정한 경쟁이 이루어지지 않을 가능성이 매우 높다. 이처럼 평균비용이 장기적으로 하락하는 항공산업에서 선발항공사에 대한 쏠림 현상이 가중된다면 향후 10년내에 국내 항공운송산업에 자연 독점이 발생할 가능성은 매우 크며 그 피해는 소비자에게 돌아갈 것이 자명하다. 결국 우리나라의 항공운수산업에서의 유효경쟁환경을 조성하기 위해서는 운수권 배분 절차에서의 비대칭규제의 원리가 상당기간 적용되어야 하며, 복수취항이 허용된 노선에서도 후발사업자가 공정하게 경쟁할 수 있도록 비대칭규제방안이 강구되어야 한다. 뿐만아니라 보충적으로 공정거래법상의 시장지배적 지위의 남용규제와 같은 비대칭규제도 강력하게 집행되어야 할 것으로 판단된다.

• Journal of Radiation Protection and Research
• /
• v.38 no.1
• /
• pp.29-36
• /
• 2013

The aim of this study was to determine the correlation between exposure index (EI) and dose factors related to radiation dose optimization in digital radiography (DR) system. Two phantoms with built-in regional test object for quantitative assessment of images were used to produce image signals that acquired in chest radiography background. EI and entrane surface dose (ESD) increased proportionally with rise of radiation dose (kVp, mAs) in both DR and CR systems. Especially, DR detector was effective to form good contrast and hence, reached easily to improvement of image quality with minimal dose changes. It made operators possible to expect the accuracy of EI values deeply related to absorbed dose of the detector. The evaluation of images was obtained specially employed calculation of noise to signal ratio (NSR) and contrast to noise ratio (CNR). These measurements were performed for how exposure factors affect image quality. NSR was inversely proportional to kVp and mAs and low NSR represented high signal detection efficiency. Consequently, EI values was the measure of the amount of exposure received by the image receptor and it was proportional to exposure factors. Therefore the EI in a recommended range from manufacturer can offer optimal image quality. Also, continuous monitoring of EI values in the digital radiography can reduce the unnecessary patient dose and help the quality control of the system.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1141-1155
• /
• 2013

A number of studies have been performed to analyze climate change impacts of water resources system. In this study, a coordinated dam operation is compared with an existing operation strategy for coping with projected future runoff scenarios. GCMs (Global Circulation Models) and the LARS-WG downscaling method was used to project future climate scenarios. The water balance model called abcd was employed to estimate future runoff scenarios. The existing dam operation comes from the national dam construction guideline, which is called the "level-operation method." The alternative coordinated dam operation are constructed as a linear programming using New York City rule for refill and drawdown seasons. The results of annual total inflow in future is projected to decrease to 72.81% for Andong dam basin and 65.65% for Imha dam basin. As a result of applying future runoff scenarios into the dam operation model, the reliability of coordinated dam operation, 62.22%, is higher than the reliability of single dam operation, 46.55%. Especially, the difference gets larger as the reliability is low because of lack of water. Therefore, the coordinated operation in the Andong & Imha dams are identified as more appropriate alternative than the existing single operation to respond to water-level change caused by climate change.

• Clean Technology
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2014

There has been increasing concerns for the problems of water security in countries, caused by the frequent occurrence of localized drought due to the climate change and uncertainty of water balance. The importance of fresh water is emphasized as considerable amount of usable fresh water is utilized for power generation sector producing electricity. PV power system, the source of renewable energy, consumes water for the every steps of life cycle: manufacturing, installation, and operation. However, it uses relatively less water than the traditional energy sources such as thermal power and nuclear power sources. In this study, to find out the use of water for the entire process of PV power system from extracting raw materials to operating the system, the footprint of water in the whole process is measured to be analyzed. Measuring the result, the PV water footprint of value chain was $0.989m^3/MWh$ and the water footprint appeared higher specially in poly-Si and solar cell process. The following two reasons explain it: poly-Si process is energy-intensive process and it consumes lots of cooling water. In solar cell process, deionized water is used considerably for washing a high-efficiency crystalline silicon. It is identified that PV system is the source using less water than traditional ones, which has a critical value in saving water. In discussing the future energy policy, it is vital to introduce the concept of water footprint as a supplementary value of renewable energy.