• Title/Summary/Keyword: 상대민감도

Search Result 203, Processing Time 0.027 seconds

The Sensitivity Analyses of Initial Condition and Data Assimilation for a Fog Event using the Mesoscale Meteorological Model (중규모 기상 모델을 이용한 안개 사례의 초기장 및 자료동화 민감도 분석)

  • Kang, Misun;Lim, Yun-Kyu;Cho, Changbum;Kim, Kyu Rang;Park, Jun Sang;Kim, Baek-Jo
    • Journal of the Korean earth science society
    • /
    • v.36 no.6
    • /
    • pp.567-579
    • /
    • 2015
  • The accurate simulation of micro-scale weather phenomena such as fog using the mesoscale meteorological models is a very complex task. Especially, the uncertainty arisen from initial input data of the numerical models has a decisive effect on the accuracy of numerical models. The data assimilation is required to reduce the uncertainty of initial input data. In this study, the limitation of the mesoscale meteorological model was verified by WRF (Weather Research and Forecasting) model for a summer fog event around the Nakdong river in Korea. The sensitivity analyses of simulation accuracy from the numerical model were conducted using two different initial and boundary conditions: KLAPS (Korea Local Analysis and Prediction System) and LDAPS (Local Data Assimilation and Prediction System) data. In addition, the improvement of numerical model performance by FDDA (Four-Dimensional Data Assimilation) using the observational data from AWS (Automatic Weather System) was investigated. The result of sensitivity analysis showed that the accuracy of simulated air temperature, dew point temperature, and relative humidity with LDAPS data was higher than those of KLAPS, but the accuracy of the wind speed of LDAPS was lower than that of KLAPS. Significant difference was found in case of relative humidity where RMSE (Root Mean Square Error) for LDAPS and KLAPS was 15.7 and 35.6%, respectively. The RMSE for air temperature, wind speed, and relative humidity was improved by approximately $0.3^{\circ}C$, $0.2m\;s^{-1}$, and 2.2%, respectively after incorporating the FDDA.

가정용 천연가스의 소비행태에 관한 연구 - 필수재의 특성을 중심으로 -

  • Kim, Yeong-Deok
    • Environmental and Resource Economics Review
    • /
    • v.7 no.2
    • /
    • pp.171-200
    • /
    • 1998
  • 천연가스의 소비실태를 조사하기 위하여 실시한 표본조사자료를 이용하여 가정용 천연가스의 소비가 실증적으로 필수재의 성격을 가지는지를 조사하였다. 이를 위해 가장 일반적인 개념인 천연가스 소비의 소득에 대한 탄력성을 추정하였고, 다른 에너지와의 상대적인 비교를 위하여 광열비 지출에서의 천연가스 소비비 중의 소득에 대한 민감도를 추정하여 광열비 일반에 대한 천연가스 소비의 상대적 필수재의 성격을 파악하였고, 가정용 천연가스의 용도인 취사용과 난방용의 상대적 필수재 특성을 살피기 위하여 가스의 위험인지도에 대한 천연가스의 용도별 반응을 추정하였다. 이로부터 얻은 결과는 다음과 같다. 우선, i) 가정용 천연가스의 소비는 일반적으로 용도에 관계없이 필수재의 성격을 지니고 있으며, ii) 다른 에너지원과 비교를 위한 광열비에서의 천연가스 소비비 중의 소득 변화에 대한 반응을 보았을 때, 모형에 따라 다르나, 취사용이나 난방용이나 광열비 일반에 비하여 필수재 성격을 가진 것으로 나타나고 있으며, iii) 취사용 천연가스의 소비가 상대적으로 난방용에 비하여 필수재의 성격을 가진 것으로 나타나고 있다.

  • PDF

Evaluation of Thermal Comfort in Ceiling Heating System (천장복사난방이 인체에 미치는 쾌적성 평가에 관한 연구)

  • 이주연;이소다노리오;조관식
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 2001.05a
    • /
    • pp.104-108
    • /
    • 2001
  • 복사에 의한 냉난방은, 장시간 재실하는 방이나 소음, 기류에 민감한 장소에 적합하고 에너지 절약면에서도 유효한 냉난방 방식이라고 알려져 있다. 일반적으로 널리 알려져 있는 바닥난방은 실온의 수직분포가 균일함으로서 인체에 쾌적한 난방방식으로 알려져 있다. 이것에 비해, 바닥의외의 벽, 천장을 활용한 냉난방설비의 쾌적성에 대해서는 아직 충분히 검토되고 잇지 않다. 따라서 본 연구는 물순환식 복사 냉난방장치를 이용하여 겨울철의 천장복사난방이 인체에 미치는 생리적, 심리적영향을 밝히고 복사난방의 유용성에 대해서 검토하는 것을 목적으로 한다. 실험은 일본 나라여자대학 인공기후실을 이용하였고, 실험조건은 실온 18$^{\circ}C$, 21$^{\circ}C$, 24$^{\circ}C$ 천장온도 $25^{\circ}C$, 3$0^{\circ}C$, 35$^{\circ}C$의 조건을 조합하여 7조건으로 설정하였다. 또, 상대 습도 40%, 기류속도 0.1m/s 이하로 일정하게 유지시켰다. 생리적반응으로는 피부온14점과 직장온을 30초 간격으로 측정하였고, 혈압, 심박수, 체중, 체지방율을 측정하고 심리적반응으로는 온열감, 쾌적감등의 항목을 10분간격으로 측정하였다.

  • PDF

CNx humidity sensors with a grid electrode (격자전극을 가진 질화탄소막 습도센서)

  • Lee, Ji-Gong;Kim, Jung-Hun;Lee, Sung-Pil
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07b
    • /
    • pp.886-889
    • /
    • 2004
  • 격자전극을 가진 질화탄소막을 이용하여 새로운 습도센서를 개발하였다. 결정성 질화탄소막의 감습 특성을 조사하고, 광범위한 상대습도($10%\sim90%$)에 대해 민감한 임피던스와 커패시턴스 의존도를 보였다. 특히 격자전극은 습기의 자유로운 흡 탈착을 용이 하게 하여 센서의 히스테리시스를 줄였다. 또한, 질화탄소막은 물리, 화학적으로 안정한 물질이므로 고온, 고습 및 화학적으로 열악한 환경 속에서도 뛰어난 특성 을 나타내었다.

  • PDF

Improved Measurements of the Rheological Property of Cement Paste using Plate/Plate and Truncated cone/Plate Sensors (Plate/Plate, Truncated Cone/Plate 센서를 이용한 시멘트반죽 유변학적 특성에 대한 개선된 측정)

  • 민병현
    • The Korean Journal of Rheology
    • /
    • v.7 no.1
    • /
    • pp.10-18
    • /
    • 1995
  • Plate/plate 및 Truncated cone/plate 감지부를 이용한 시멘트반죽의 유변학적 특성 을 측정함에 있어 관련된 오차에 대한 실험 및 이론적 분석이 보고된다. 주요인자로는 감지 부 직경과 상하 감지부 사이의 간격이 고려되었다. Cone/plate 감지부의 원추끝을 깍아 간 격의 크기를 늘린 Truncated cone/plate 감지부의 토르크 분포에 대한 이론적 분석결과 원 추 간격이 0.7mm 까지 절단되더라도 8.5%의 오차범위내에서는 cone/plate 감지부의 역할을 수행하는 것으로 판단된다. 실험결과는 샘플주변의 상대습도가 결과에 영향을 끼치고 감지 부의 기하학적 요인에도 매우 민감함을 보여준다. 이결과는 정지시간을 포함한 오랜실험기 간동안 미소변형하에서 유변학적 특성을 연구하는데 도움이 될것으로 판단된다.

  • PDF

Humidity Dependence of Tribological Behavior of DLC Films (DLC 필름의 마찰마모 특성의 습도 의존성에 대한 연구)

  • Park, Se-Jun;Lee, Kwang-Ryeol;Lee, Seung-Cheol;Ko, Dae-Hong
    • Journal of the Korean Vacuum Society
    • /
    • v.15 no.3
    • /
    • pp.287-293
    • /
    • 2006
  • Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

Shear Strength Characteristics of Weathered Granite Soil below the Freezing Point (동결온도 조건에서의 화강풍화토 전단강도 특성에 관한 연구)

  • Lee, Joonyong;Choi, Changho
    • Journal of the Korean GEO-environmental Society
    • /
    • v.14 no.7
    • /
    • pp.19-29
    • /
    • 2013
  • Analysis via classical soil mechanics theory is either ineffective or inappropriate for fully describing stress distribution or failure conditions in cold regions, since mechanical properties of soils in cold regions are different from those reported in the classical soil mechanics theory. Therefore, collecting and analyzing technical data, and systematic and specialized research for cold regions are required for design and construction of the structure in cold regions. Freezing and thawing repeat in active layer of permafrost region, and a loading condition affecting the structure changes. Therefore, the reliable analysis of mechanical properties of frozen soils according to various conditions is prerequisite for design and construction of the structure in cold regions, since mechanical properties of frozen soils are sensitive to temperature condition, water content, grain size, relative density, and loading rate. In this research, the direct shear apparatus which operates at 30 degrees below zero and large-scaled low temperature chamber are used for evaluating shear strength characteristics of frozen soils. Weathered granite soil is used to analyzed the shear strength characteristics with varying freezing temperature condition, vertical confining pressure, relative density, and water content. This research shows that the shear strength of weathered granite soil is sensitively affected by various conditions such as freezing temperature conditions, normal stresses, relative densities, and water contents.

Ecological Characteristics and Distribution of Fish in the Downstream Region of Gyeongan Stream (경안천 하류구간에 서식하는 어류의 분포 및 생태특성)

  • Lee, Eui-Haeng;Kim, Mirinae;Kim, Hyun-Mac;Son, Misun;Chang, Kwang-Hyeon;Nam, Gui-Sook
    • Korean Journal of Environmental Biology
    • /
    • v.31 no.4
    • /
    • pp.478-485
    • /
    • 2013
  • Fish field survey, especially fish distribution and their ecological characteristics, was performed in the downstream region of Gyeongan stream during the period of before (June) and after (October) the summer monsoon in 2010. Depending on the characteristics of each site, fyke net or casting net was used for fish sampling. Feeding classification was determined by the analysis of stomach contents. Total number of family and species sampled were 5 and 17, respectively. The dominant family was Cyprinidae (12 species), and relative abundance (RA) of the most dominant species, Lepomis macrochirus and Zacco platypus, was 38% and 24%, respectively. Exotic species and Korean endemic species observed were 3 (423 individuals, RA 44%) and 4 (98 individuals, RA 10%), respectively. Tolerance guild analysis as characteristics of ecological indicators revealed an undoubtedly high percentage (97%), compared to others as reflected by the identification of just one sensitive species. Analysis of trophic guilds showed that L. macrochirus dominated among insectivores (44% RA). The food of L. macrochirus composed of, aquatic insects, benthic invertebrates, zooplankton, Chironomidae, and waterweed. Thus, we determined that L. macrochirus could be classified as insectivores (partially carnivores) in this study. Conversely, Z. platypus consumed Cladocera exclusively, greater than 90% of their feed. We presume that stable isotope analysis would identify the exact position of these species in the food web.

The Uncertainty Analysis of SWAT Simulated Streamflow Applied to Chungju Dam Watershed (충주댐 유역의 유출량에 대한 SWAT모형의 예측불확실성 분석)

  • Joh, Hyung-Kyung;Park, Jong-Yoon;Shin, Hyung-Jin;Lee, Ji-Wan;Kim, Seong-Joon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.29-29
    • /
    • 2011
  • SWAT (Soil and Water Assessment Tool) 모형은 물리적 기반의 준분포형 강우-유출 모형으로서, 대규모의 복잡한 유역에서 장기간에 걸친 다양한 종류의 토양과 토지이용 및 토지관리 상태에 따른 유출과 유사 및 오염물질의 거동에 대한 토지관리 방법의 영향을 예측이 가능하여, 수자원 관리 계획 및 유역관리를 위한 의사결정 지원 등 그 적용 범위가 매우 광범위하다. 이러한 모형의 적용성 검증을 위해서는 매개변수 민감도 분석 및 검 보정, 예측 불확실성 분석을 필요로 한다. 최근 수문 모델의 불확실성을 분석하기 위한 다양한 기법들이 개발 되었는데, 본 연구는 충주댐 유역(6,581.1 m)을 대상으로 유역출구점의 실측 일 유출량 자료(1998~2003)를 바탕으로 SWAT 모형의 유출관련 매개변수(총 18개)에 대한 불확실성 분석을 실시하였다. 이때 사용된 분석 기법으로는 SUFI2 (Sequential Uncertainty FItting algorithm 2), GLUE (Generalized Likelihood Uncertainty Estimation), ParaSol (Parameter Solution)등을 적용 하였다. 이러한 기법은 모두 SWAT-CUP (SWAT-Calibration Uncertainty Program, Abbaspour, 2007) 모형에 탑재되어있으며, 모형의 결과로써 검 보정, 매개변수의 민감도 분석, 각종 목적 함수 및 불확실성의 범위 등이 자동으로 산출 되므로 모형의 사용자가 불확실성 평가 기법의 분석 및 비교를 손쉽게 할 수 있다. 그 결과 대표적인 목적 함수인 결정 계수( $^2$)와 NSE (Nash-Sutcliffe Model Efficiency)는 모두 0.65에서 0.92사이의 값을 나타내어 대체적으로 모의가 잘 이루어졌음을 알 수 있었다. 그러나 불확실성의 범위를 나타내는 지표인 p-factor 및 r-factor에서는 평가 기법 별로 그 차이가 확연하게 드러났다. 여기서 p-factor는 불확실성 범위에 실측치가 포함되는 비율이며, r-factor는 불확실성의 상대적인 범위로 각각 1과 0에 가까울수록 모의 기법의 성능이 우수함을 의미한다. 세 가지 알고리듬 중에서 SUFI2의 p-factor가 약 0.51로 가장 높게 나타났으며, ParaSol의 r-factor가 0.00으로 가장 작게 나타났다. 여기서 p-factor는 불확실성 범위에 실측치가 포함되는 비율이며, r-factor는 불확실성의 상대적인 범위를 의미한다. 본 연구의 결과는 SWAT 모형을 이용한 수문모델링에서 수문분석에 따른 예측결과의 불확실성을 정량적으로 평가함으로서, 모형의 적용성 평가 및 모의결과의 신뢰성 확보에 근거자료로 활용이 가능할 것으로 판단된다.

  • PDF

Development of Computer Code for Simulation of Multicomponent Aerosol Dynamics -Uncertainty and Sensitivity Analysis- (다성분 에어로졸계의 동특성 묘사를 위한 전산 코드의 개발 -불확실성 및 민감도 해석-)

  • Na, Jang-Hwan;Lee, Byong-Whi
    • Nuclear Engineering and Technology
    • /
    • v.19 no.2
    • /
    • pp.85-98
    • /
    • 1987
  • To analyze the aerosol dynamics in severe accidents of LMFBR, a new computer code entitled MCAD (Multicomponent Aerosol Dynamics) has been developed. The code can treat two component aerosol system using relative collision probability of each particles as sequences of accident scenarios. Coagulation and removal mechanisms incorporating Brownian diffusion and gravitational sedimentation are included in this model. In order to see the effect of particle geometry, the code makes use of the concept of density correction factor and shape factors. The code is verified using the experimental result of NSPP-300 series and compared to other code. At present, it fits the result of experiment well and agrees to the existing code. The input variables included are very uncertain. Hence, it requires uncertainty and sensitivity analysis as a supplement to code development. In this analysis, 14 variables are selected to analyze. The input variables are compounded by experimental design method and Latin hypercube sampling. Their results are applied to Response surface method to see the degree of regression. The stepwise regression method gives an insight to which variables are significant as time elapse and their reasonable ranges. Using Monte Carlo Method to the regression model of LHS, the confidence level of the results of MCAD and their variables is improved.

  • PDF