• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.28-36
• /
• 2023

Solar radiation that is measured at relatively small number of weather stations is one of key inputs to crop models for estimation of crop productivity. Solar radiation products derived from GK-2A and Himawari 8 satellite data have become available, which would allow for preparation of input data to crop models, especially for assessment of crop productivity under an agrivoltaic system where crop and power can be produced at the same time. The objective of this study was to compare the degree of agreement between the solar radiation products obtained from those satellite data. The sub hourly products for solar radiation were collected to prepare their daily summary for the period from May to October in 2020 during which both satellite products for solar radiation were available. Root mean square error (RMSE) and its normalized error (NRMSE) were determined for daily sum of solar radiation. The cumulative values of solar radiation for the study period were also compared to represent the impact of the errors for those products on crop growth simulations. It was found that the data product from the Himawari 8 satellite tended to have smaller values of RMSE and NRMSE than that from the GK-2A satellite. The Himawari 8 satellite product had smaller errors at a large number of weather stations when the cumulative solar radiation was compared with the measurements. This suggests that the use of Himawari 8 satellite products would cause less uncertainty than that of GK2-A products for estimation of crop yield. This merits further studies to apply the Himawari 8 satellites to estimation of solar power generation as well as crop yield under an agrivoltaic system.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.280-289
• /
• 2023

Diverse native tree species are distributed in Korean forests; however, information on their regeneration strategies is limited. This study analyzed seed rain from 2011 to 2013, seedling emergence, seedling survival, lifespan distribution, and the relationship between seedling mortality and herbaceous vegetation for 3 years, from 2012 to 2014, to understand the natural regeneration and early survival characteristics of Fraxinus rhynchophylla Hance in natural broad-leaved forests. Seed rain and emerged seedling density significantly differed among the years (p < .05). An increase in seed rain was followed by an increase in seedling emergence in the following year. Seed rain in 2013 and seedling emergence in 2014 showed a significant correlation (p < .05), confirming the trait of F. rhynchophylla seeds that germinate in the following year after seed production. Seedlings emerged in late spring and early summer. Of the seedlings, 78% emerged in the early summer of 2014. Most seedlings died immediately after emergence. Of the seedlings that emerged in August 2012, 56% died within 2 months, and 38% of those that emerged in July 2014 died within 1 month. Shade and competition against ground vegetation chiefly affected the seedling survival of F. rhynchophylla. Fraxinus rhynchophylla showed mast seeding, with a large number of seed production in a particular year. A surge of seedling emergence followed in the early summer of the next year. However, most seedlings died in the same year of emergence. Fraxinus rhynchophylla has a high seedling mortality, but mast seeding and the resulting high seedling emergence produce a few survived seedlings, enabling the continuation of the F. rhynchophylla population. Efforts and research on the natural regeneration of native tree species are required to effectively manage natural forests in Korea.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.65-74
• /
• 2023

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using "smart chromatic technology", with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 ㎛ after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.4
• /
• pp.143-161
• /
• 2022

The aim of this study is to identify the learning performance of online classes using problem-based learning(PBL) for clothing and textiles majors in college with the increased use of online learning tools after the COVID-19 pandemic. In order to achieve this goal, the PBL was developed and applied to the 'Fashion Marketing and Merchandising' class conducted in real-time online at University in North Chungcheong Province, Korea for four weeks. After a four-week PBL class, a survey was conducted on 35 students in the 'Fashion Marketing and Merchandising' class and the 35 completed questionnaires were used for analysis. The measurement tools of this study were self-directed learning, cooperative learning ability, problem-solving ability, and learning achievement regarded as an important learning effect in PBL class. In addition, students' self-reflective essays were also analyzed to examine the educational effect of PBL applying online classes. As a result of this study, bivariate correlations among the four variables, students' self-directed learning, cooperative learning ability, problem-solving ability, and learning achievement were significantly positive. Furthermore, the results of multiple regression analysis showed that the three independent variables had significant effects on students' perceived learning achievement, in the order of cooperative learning ability, self-directed learning, and problem-solving ability. The students' self-reflective essays indicated that problem-based learning worksheet was helpful for identifying problems, and clarifying what they already and what they need to study more. Based on this study, it could be recommended that online class applying PBL could contribute to the improvement of student's learning performance.

• Journal of the Daesoon Academy of Sciences
• /
• v.44
• /
• pp.141-175
• /
• 2023

This comparative study combines the methodologies of comparative research and literature review to examine Daesoon Thought. Comparative religious analysis in the social sciences, does not presuppose an a priori framework of the essence of religion because it targets various aspects of religion which are revealed within a historical field. However, it does not decompose and return to psychological or social phenomena like social sciences. In addition, with the emergence of religious pluralism, the climate of focusing on similarities between religions has already been accomplished to some degree. Furthermore, it is worth noting that many spiritual movements in modern spirituality reveal mixed or amorphous characteristics without being restricted by specific religious membership. It is time to overcome instrumentation and restore the transcendence of its original appearance even in secular humanist reasoning. It can be said that this reveals the perception that the ills and crises of modern civilization should be overcome in connection with the opening of the acquired world of Daesoon Thought. It could further be said that the main culprit of evil behavior is instrumental reason or degenerated reason rather than spirituality. Religion is the intellectual crystalline body of humankind and aims at human perfection and salvation. However, extremists in previous times amplified conflicts between religions and formed ideas suitable for their specific regions through different experiences. This generated mental rifts that proved greatly influential. At the time of initial inception, each religion confronted and fought other ideologies, but when the era of religious pluralism began, the necessity for inter-spiritual communication became urgent. It could be said that happiness is the realization of human spirituality by exploring the vision of humanism. In that case, the combined methodologies of comparative research and literature review reveal that the spirituality of Daesoon Thought would enable a humanism based on human dignity. This would be a path for seeking spirituality through human life and living as a true human being. Spiritual humanism as discussed through this study aims to share the problems of modern civilization and provide a critical view of modern civilization that shows the roots of prevailing thought are stuck in a Cartesian dualistic view of humanity and the world. The type of spiritual humanism to examined here focuses on a cosmotheandric vision by considering the spiritual return to Daoism via Daesoon Thought. This would treat human beings like heaven in alignment with Donghak ideology and honor the human dignity proposed by Daesoon Thought. It would also deliver sentient beings from suffering and to bliss in accordance with the aims of faith in Maitreya Buddha, and it would implement the Resolution of Grievances for Mutual Beneficence in fulfillment of Daesoon Thought.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.30-36
• /
• 2019

Purpose: This study examined the effects of gender, age, underlying disease, duration after onset of symptoms, preoperative invasive procedures, bacterial culture of joint fluid, and stage of infection by the Gachter classification on the prognosis of patients with infectious knee arthritis who underwent arthroscopic surgery. Materials and Methods: From June 2014 to December 2016, 51 patients who underwent arthroscopic surgery for infective knee arthritis were enrolled in this study. The average follow-up period was 14.2±2.1 months (range, 12-20 months). The subjects were 27 men (52.9%) and 24 women (47.1%), with an average age of 55.1±17.6 years (range, 13-84 years). A preoperative evaluation of the joint aspiration with a count of more than 50,000 leukocytes and a polymorphonuclear leukocyte count of 95% or more was performed. All patients underwent arthroscopic surgery and postoperative continuous joint irrigation. Results: The initial mean value of the C-reactive protein decreased from 9.55±6.76 mg/dl (range, 1.51-31.06 mg/dl) to a final mean of 0.74±1.26 mg/dl (range, 0.08-6.77 mg/dl); the mean duration of C-reactive protein normalization was 27.6±18.9 days (range, 8-93 days). Among the 51 patients who received arthroscopic surgery and antibiotics, 44 patients (86.3%) with infectious knee arthritis completed treatment with improved clinical symptoms, such as fever, pain, and edema, and the C-reactive protein decreased to less than 0.5 mg/dl. Finally, 5 cases were treated with two or more arthroscopic operations, and 2 cases were converted to arthroplasty after prosthesis of antibiotic-loaded acrylic cement. Conclusion: The duration of surgery after the onset of symptoms and the stage according to the Gächter classification are important prognostic factors for predicting the successful treatment of infectious knee arthritis. On the other hand, the other factors were not statistically significant. Nevertheless, patients with bacteria cultured from the joint fluids appear to reflect the treatment period because the period of normalization of the C-reactive protein is shorter than that of the control group.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.73-82
• /
• 2016

Best drought tolerance index was determined through statistics analysis and growth appearance of drought tolerant plants was determined by cultivation in pot and sloping land. For determination of best drought tolerant indicators, RD(Resistant dry days), LD(Leaf area), UTR(Unit transpiration), RWC(Relative water content), RWL(Relative water loss), LA(Leaf area), SN(Stoma unmber) and SA(Stoma area) were carried out by correlation and PCA analysis. RWL and UTR were affected on plant drought tolerance according to comparison among six indices for resistant dry days. The PCs axes separated SA, LA, RD and RWC and SN. UTR was negatively correlated with SA, RWL were also negatively correlated with RWC and SN. RWL and UTR were proved best selection indicator for the selection of drought tolerant species. Ulmus parvifolia, Bidens bipinnata, Patrinia villosa, Kummerowia striata, Arundinella hirta, Artemisia gmelini etc. were selected drought tolerant plants. Shoot growth appearance of drought resistant plants was differed pot and sloping land. Shoot growth and leaf number was no significant differences between the pot and sloping land. However, root growth of drought tolerant plants was all the difference between two cultivation. T/R ratio of drought tolerant plants was also found a big difference. T/R ratio of drought tolerant plants in sloping land was lower than that of pot. These results will be served efficiently plant breeding.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.6-22
• /
• 2022

In this paper classifies the types of 228 anchor stones discharged from the west and south coasts, assumes a combined method by type, routes through discharge locations, and It attempted to estimate the burial site. Prior to classification of types, the weight, thickness, width, and length of the anchor stone were measured, and the largest Young in the tomb The scent weight was classified into I~V groups, and the shape of the anchor stone was classified into 1-6 types. All of these weight and shape correlations It was classified into 17 types. The combined method by type is 180kg or less depending on the morphological characteristics of the reference value of the extracted anchor stone, and the type An anchor of type 1 or 2 is used in combination with an anchor, and a anchor of type 3 or 6 weighs more than 180kg and is combined with an anchor The dragon was assumed to be an anchor. Along with this, the route and burial site are identified through past records and testimony of local residents It was checked against the data. The route was largely consistent with past records, but the new route was apparent in waters near the island or inland It was also drawn. In the case of burial sites, small and large in Taean Mado Sea and Jindo Byeokpajin Sea, where anchor stones are concentrated, Considering the pattern of the type anchor stones being discharged, it was consistent with the testimony that ships of various sizes were mysterious in the two seas. Based on this type classification, a study on the spatiality of the anchors was conducted. First, a comparison and analysis was done on whether actual real data, such as anchor stones, old ships, and relics, were identified on the Joun-ro route and international trade routes as recorded in the past literature. Where there was no record, the route was estimated based on real data. To this end, routes estimated based on the testimony of local residents and modern ship workers were analyzed as to whether ships traveled there in the past and whether they could actually sail. Next, the location of each seedling was estimated by ship size according to the weight of the anchor stone. In the case of the Taean Mado Sea and Jindo Byeokpajin Sea, both small and large anchor stones were discharged from the coastline and were far away.

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 1997.10a
• /
• pp.134-152
• /
• 1997

Plant viruses of tobacco including tobacco mosaic virus (TMV) and potato virus Y (PVY) cause severe economic losses in leaf-tobacco production. Cultural practices do not provide sufficient control against the viruses. Use of valuable resistant cultivars is most recommendable for the control of the viruses. However, conventional breeding programs are not always proper for the development of virus-resistant plants mostly owing to the frequent lack of genetic sources and introduction of their unwanted properties. Therefore, we tried to develop virus-resistant tobacco plants by transforming commercial tobacco cultivars, NC 82 and Burley 21, with coat protein (CP) or replicase (Nlb) genes of TMV and PVY necrosis strain (PVY-VN) with or without untranslated region (UTR) and with or without mutation. Each cDNA was cloned and inserted in plant expression vectors with 1 or 2 CaMV 35S promotors, and introduced into tobacco leaf tissues by Agrobacterium tumefaciens LBA 4404. Plants were regenerated in kanamycin-containing MS media. Regenerated plants were tested for resistance to TMV and PVY In these studies, we could obtain a TMV-resistant transgenic line transformed with TMV CP and 6 genetic lines with PVY-VN cDNAs out of 8 CP and replicase genes. In this presentation, resistance rates, verification of gene introduction in resistant plants, stability of resistance through generations, characteristics of viral multiplication and translocation in resistant plants, and resistance responses relative to inoculum potential and to various PVY strains will be shown. Yield and quality of leaf tobacco of a promising resistant tobacco line will be presented.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.207-221
• /
• 2023

This study suggests deep neural network models for estimating air temperature with Level 1B (L1B) datasets of GEO-KOMPSAT-2A (GK-2A). The temperature at 1.5 m above the ground impact not only daily life but also weather warnings such as cold and heat waves. There are many studies to assume the air temperature from the land surface temperature (LST) retrieved from satellites because the air temperature has a strong relationship with the LST. However, an algorithm of the LST, Level 2 output of GK-2A, works only clear sky pixels. To overcome the cloud effects, we apply a deep neural network (DNN) model to assume the air temperature with L1B calibrated for radiometric and geometrics from raw satellite data and compare the model with a linear regression model between LST and air temperature. The root mean square errors (RMSE) of the air temperature for model outputs are used to evaluate the model. The number of 95 in-situ air temperature data was 2,496,634 and the ratio of datasets paired with LST and L1B show 42.1% and 98.4%. The training years are 2020 and 2021 and 2022 is used to validate. The DNN model is designed with an input layer taking 16 channels and four hidden fully connected layers to assume an air temperature. As a result of the model using 16 bands of L1B, the DNN with RMSE 2.22℃ showed great performance than the baseline model with RMSE 3.55℃ on clear sky conditions and the total RMSE including overcast samples was 3.33℃. It is suggested that the DNN is able to overcome cloud effects. However, it showed different characteristics in seasonal and hourly analysis and needed to append solar information as inputs to make a general DNN model because the summer and winter seasons showed a low coefficient of determinations with high standard deviations.