• The Korean Journal of Rheology
• /
• v.2 no.2
• /
• pp.19-27
• /
• 1990

레이저와 타이머장치를 설치한 낙구식 점도계에서 구와 니들이 주어진 구간을 통과 하는 시간을 측정하여 종말속도를 정확히 결정하였고 점성이 작은유체와 낮은 전단률 점성 과 영전단률 점성은 속이 빈 알루미늄 구와 니들이 이용하여 측정하였다. 알루미늄 구와 니 들의 속에 철분을 삽입하여 밀도를 다양하게 변화시켰다. 낙구식 점도계에서 측정한 낮은 전단률 점성과 영 전단률 점성 그리고 모세관점도계에서 측정한 높은전단률 점성과 무한 전 단률 점성을 이용하여 점탄성 유체의 특성이완시간을 결정하였다. 실린더 속의 시험용 유체 를 교란시키지 않고 밑면에 떨어진 구를 회수하는 장치를 설치하였다. 이 장치는 하나의 구 로써 점탄성유체의 특성확산시간을 측정하는데 대단히 효과적이었다. Polyacrylamide Separan AP-273 용액(농도 500-200 wppm)의 특성이안시간과 특성화산시간을 낙구식 점도 계와 모세관 점도계의 실험결과를 이용하여 결정하고 폴리며 용액의 퇴화 현상을 실험적으 로 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.319-332
• /
• 2014

Insertion loss is used as the character to express the efficiency of EMI filter. In this paper, we studied the better method that can measure the insertion loss of EMI filter exactly than the original method. For the achievement of this, the method measuring both common mode(CM) and differential mode(DM) insertion loss with arbitrary input/output impedance is accomplished using a 4-ports S-parameters system for consideration of unbalanced factor. Using this method, when input/output used in specific system is known, CM/DM insertion loss of EMI filter inserted in the system can be calculated. Finally, we applied 4-ports modeling method to 'X/Y capacitor part' and suggested the algorithm for selecting suitable the value of Y-capacitor using mixed mode S-parameters and mixed mode chain S-parameters.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.269-275
• /
• 2019

Purpose: This study analyzed the treatment effects of drain insertion in the posteromedial portal after an arthroscopic synovectomy and posterior septum resection for pyogenic arthritis. Materials and Methods: From June 2005 to December 2016, 56 cases (55 patients, 1 case of bilateral knee) were diagnosed with pyogenic arthritis and arthroscopic treatment was performed. Fourteen patients (25.0%) were identified with causative organisms. The average follow-up period was 12.3 months, and the mean age was 67.8 years old. Twenty-four cases were males and 31 cases were females. Kellgrene-Lawrence grade (K-L grade) I was 6 patients, II was 20 patients, III was 11 patients, and IV was 18 patients. Surgery was performed through six portal. The posterior septum was removed and a drainage tube was inserted from the posterior medial side to the posterior side of the joint. The Lysholm score was used after surgery for a functional evaluation. The K-L grade at the time of admission and at the last follow-up were compared for a radiological evaluation. Results: The mean normalization period of the C-reactive protein was 59.8 days (6-164 days). Intravenous antibiotics were used for an average of 37.1 days. The results of the functional evaluation revealed a mean Lysholm score of 64.5 (30-98) in a total of 56 cases. Two reoperations was performed, but the treatment was completed with same method in all patients. The K-L grade was similar at the time of surgery and at the last follow-up (p>0.05). Conclusion: The method of drain insertion in the posteromedial portal after arthroscopic synovectomy and posterior septum resection for pyogenic arthritis is an effective technique that can obtain satisfactory results by inducing proper exudate discharge.

• Composites Research
• /
• v.12 no.3
• /
• pp.55-65
• /
• 1999

In this paper, the thermal buckling and postbuckling behaviour of composite beam with embedded shape memory alloy (SMA) wires are investigated experimentally and analytically. The results of thermal buckling tests on uniformly heated, clamped, composite beam embedded with SMA wire actuators are presented and discussed in consideration of geometric imperfections, slenderness ratio of beam and embedding position of SMA wire actuators. The shape recovery force can reduce the thermal expansion of composite laminated beam, which result in increment of the critical buckling temperature and reduction of the lateral deflection of postbuckling behaviours. It is presented quantitatively on the temperature-load-deflection behaviour records how the shape recovery force affects the thermal buckling. The cross tangential method is suggested to calculate the critical buckling temperature on the temperature-deflection plot. Based on the experimental analysis, the new formula is also proposed to describe the critical buckling temperature of a laminated composite beam with embedded SMA wire actuators.

• Journal of Hospice and Palliative Care
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2010

Purpose: A central venous catheterization (CVC) is frequently used for delivering anti-cancer chemotherapeutic agents, blood products, parenteral nutrition, and other intravenous therapy in patients with cancer. Major complications of CVC use are thrombosis, infection, and mechanical complications. The aim of this study was to evaluate the frequency of CVC complications and related factors. Methods: The records of cancer patients who received a CVC at our university hospital from March 2001 to October 2006 were retrospectively investigated. Chi square test was used to determine whether there was a related factor for thrombosis or infection, and Kaplan-Meier analysis for univariate analysis, or Cox-regression analysis for multivariate analysis was used for catheter life span. Results: Three hundred and ten CVCs (235 nontunneled, 75 tunneled) were inserted in 310 patients (157 males, 153 females). Among them, 104 had hematologic cancers and 206 had solid cancers. The mean age of the patients was 52 years (range, 19~82 years). CVC complications occurred in 60 cases (19%). CVC-related thrombosis occurred frequently in patients with infection (P=0.003), whereas diagnosis, catheter type, transfusion, and TPN history did not affect infection or thrombosis. The mean duration of the catheter was 102 days (range, 2~1,330 days), and the duration was prolonged in patients with tunneled catheters (P=0.000), or without transfusion through CVC (P=0.030). Conclusion: The major complications for long-term use of a CVC were infectionand thrombosis. Tunneled catheter was effective tool for long term use, especially in cases without transfusion through CVC. The studies on the prevention or treatment ofthrombosis and infection are, therefore, warranted by using CVC for an extended period of time.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.82-82
• /
• 2001

본 연구는 한우에 있어서 인공수정후 수태율증진을 위한 기초자료를 확보할 목적으로 성숙 미경산 한우의 발정동기화를 위해 CIDR(EAZI-BREED CIDR Plus, USA)를 7일간 질내에 삽입하였고, CIDR처리 제 6일째에 PGF2$\alpha$(lutlyase, USA)제제 5 $m\ell$을 근육주사하여 발정이 유기된 92%의 개체를 인공수정을 실시하였다. 수태율증진을 위해 무처리구를 두었고, hCG처리구(Chorulon, Intervet, Netherlands)는 2000IU를 근육 주사하였으며, CIDR처리구에는 Estradiol-17$\beta$의 캡슐을 제거한 CIDR를 수정후 7일부터 일주일간 질내에 삽입 처리하여 각 처리당 15두씩 총 45두의 한우를 실험에 공시하였다. 발정이 유기된 개체는 인공수정후 30일까지 2일 간격으로 채혈하여 혈중 Progesterone, IGF, IGF-II 및 cortisol 농도를 RIA법으로 분석하였으며 수정 후 60일 이후에는 직장검사법으로 임신감정을 실시하였다. 수정후 수태율은 대조구와 CIDR 처리구에서는 평균 62%였으나 hOG처리구는 73%로서 대조구에 비해 유의적으로 수태율이 높게 나타났다. 이때의 혈중 progesterone농도를 분석한 결과, 대조구에 CIDR 처리구의 수정후 7일째부터 증가하기 시작하여 제 12일째에서 평균 5.5ng/$m\ell$까지 증가하다가 그 이후 재발정 예정일일 21일째에 다소 감소되다가 다시 증가되어 일정한 수준으로 유지되었다 그러나 hCG처리구의 경우 수정후 5일부터 progesterone이 증가하다가 제 15일까지 약 10ng/$m\ell$까지 높은 progesterone이 유지되었다. 이와 같은 결과로 보아 hCG는 혈중 progesterone농도를 증가시킴으로써 난소내 임신황체의 progestorone분비 능을 촉진시키는 작용을 하는 것으로 사료되나, 한편 혈중 IGF I과 IGF-II농도는 대조구, hCG처리구 및 CIDR 처리구간의 차이가 없이 수정 후 제10일까지는 다소 높은 수준이었으나 그 이후 감소되는 현상으로 혈중 progesterone농도와는 부의 상관관계를 보였다. 따라서 IGF-I과 IGF-II는 혈중 progesterone의 농도를 인위적으로 조절하거나 황체의 progesterone분비기능을 직접 조절하는 역할은 하지 않는 것으로 사료되며, 특히 초기 임신의 수태율에 직접적으로 영향이 없는 것으로 사료된다. 또한 혈중 cortisol농도는 처리간의 차이는 확인할 수 없으나 임신과 비임신간의 혈중 cortisol농도는 유의적으로 차이가 있는 것으로 나타났다. 본 실험의 결과로 인공수정이나 수정란이식 및 체세포복제 수정란뿐만 아니라 형질전환 수정란의 이식후 수태율을 증진시켜 첨단기술의 조기정착을 위해 이식 후 7일째나 인공수정 후 7일째 hCG제제를 근육주사로 간단하게 처리함으로써 수태율을 크게 개선될 수 있으며 이것은 난소의 황체기능 즉, 황체로부터 충분한 progesterone을 분비할 수 있는 내분비적 환경을 제공하는 것으로 사료된다.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.818-825
• /
• 2001

Polycarbonate(PC)/montmorillonite (MMT) nanocomposites were prepared by solution and melt mixing methods. A d-spacing of the nanocomposites was measured by an X-ray diffractometer. Neat montmorillonite (MMT-Na) and MMTs modified by dodecyl ammonium (MMT-DA) or dimethyl hydrogenated tallow 2-ethylhexyl ammonium (MMT-25A) were used. The d-spacing value of PC/MMT-25A and PC/MMT-DA was higher than that of PC/MMT-Na. The d-spacing increased from around 12 to $37AA$ depending on the mixing method. PC was more readily introduced to the gallery of MMT as the molecular weight of PC reduced and the mixing time increased. PC/MMT-25A showed higher thermal stability by thermogravimetric analysis (TGA) than PC/MMT-DA and PC/MMT-Na.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.765-770
• /
• 2009

This paper presents a new open stub structure of Kuroda low-pass filter using DGS(Defected Ground Structure). The open stub having 130ohm is made with equivalent new structure using DGS. This method enable to the fabrication of Kuroda low-pass filter by extending width of the line. In case of FR4(er=4.8, h=0.7874mm), the width of open stub(130ohm) is under 0.1mm. But, the width of open stub using DGS can extend to the width of 0.5mm. 5th order Kuroda low-pass filter design using open stub with DGS shows excellent agreement between theoretical simulation and experimental results.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.193-196
• /
• 2005

A posterior 3-portal arthroscopic approach with the patient in the prone position provides a novel and optimal approach for isolated subtalar arthrodesis. This approach facilitates access to the posterior talocalcaneal facet and facilitates safe access with regard to the posteromedial neuromuscular bundle. The technique involves prone positioning, establishment of two posterolateral portals and one posteromedial portal, arthroscopic posterior talocalcaneal facet debridement, percutaneous morcellized bone grafting and internal screw fixation. Preliminary results have shown high patient satisfaction, an excellent fusion rate and less postoperative morbidity than open subtalar arthrodesis.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1528-1529
• /
• 2011

플라즈마 변수를 측정하기 위한 가장 일반적인 방법은 정전탐침(Langmuir Probe)을 이용하는 것이다. 정전탐침은 RF 플라즈마 내에 삽입될 경우 탐침의 전위가 플라즈마 전위에 의해 진동하여 탐침전류의 왜곡이 발생하여 정확한 플라즈마 변수 측정이 어렵다. 탐침 전위의 변동을 최소화하기 위해 임피던스가 큰 인덕터를 탐침 회로 내에 삽입한다. 본 연구에서는 자기 공명 주파수가 13.56MHz 근방의 인덕터 3종류를 선정하여 간단한 RF 보상 정전탐침을 제작하여 유도결합형 플라즈마의 특성을 측정하였다. RF 보상 정전탐침에 의해 구해진 플라즈마의 전자 온도 및 플라즈마 전위는 감소하며, 플라즈마의 전자 밀도는 증가함을 알 수 있었다.